• Spatial Information Research
• /
• v.21 no.4
• /
• pp.25-34
• /
• 2013

The purpose of this study is to develop an efficient BIM-based FM(Facility Management) system architecture to integrate the heterogeneous solution data related to FM. The heterogeneous solution data can be an FM system, asset management system, or facility sensor database systems, as well as files created by a modeler. In this study, we define the consideration for the external heterogeneous data integration related to BIM-based FM and propose the methodology. To implement it, trends in related studies were reviewed and general use cases of BIM-based FM were derived to develop the architecture for the integration between BIM and the heterogeneous solution data. The component architecture was designed to implement the use cases, and the schema was developed for the prototype by using the proposed architecture.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.253-259
• /
• 2017

Recent development in science and technology has modernized the weapon system of ROKN (Republic Of Korea Navy). Although the cost of purchasing, operating and maintaining the cutting-edge weapon systems has been increased significantly, the national defense expenditure is under a tight budget constraint. In order to maintain the availability of ships with low cost, we need accurate demand forecasts for spare parts. We attempted to find consumption pattern using data mining techniques. First we gathered a large amount of component consumption data through the DELIIS (Defense Logistics Intergrated Information System). Through data collection, we obtained 42 variables such as annual consumption quantity, ASL selection quantity, order-relase ratio. The objective variable is the quantity of spare parts purchased in f-year and MSE (Mean squared error) is used as the predictive power measure. To construct an optimal demand forecasting model, regression tree model, randomforest model, neural network model, and linear regression model were used as data mining techniques. The open software R was used for model construction. The results show that randomforest model is the best value of MSE. The important variables utilized in all models are consumption quantity, ASL selection quantity and order-release rate. The data related to the demand forecast of spare parts in the DELIIS was collected and the demand for the spare parts was estimated by using the data mining technique. Our approach shows improved performance in demand forecasting with higher accuracy then previous work. Also data mining can be used to identify variables that are related to demand forecasting.

• Journal of Environmental Science International
• /
• v.24 no.6
• /
• pp.743-753
• /
• 2015

In this study, it is an object to develop a regression model for the estimation of TOC (total organic carbon) concentration using investigated data for three years from 2010 to 2012 in the Gam Stream unit watershed, and applied in 2009 to verify the applicability of the regression model. TOC and $COD_{Mn}$ (chemical oxygen demand) were appeared to be derived the highest correlation. TOC was significantly correlated with 5 variables including BOD (biological oxygen demand), discharge, SS (suspended solids), Chl-a (chlorophyll a) and TP (total phosphorus) of p<0.01. As a result of PCA (principal component analysis) and FA (factor analysis), COD, TOC, SS, discharge, BOD and TP have been classified as a first factor. TOCe concentration was estimated using the model developed as an independent variable $BOD_5$ and $COD_{Mn}$. R squared value between TOC and measurement TOC is 0.745 and 0.822, respectively. The independent variable were added step by step while removing lower importance variable. Based on the developed optimal model, R squared value between measurement value and estimation value for TOC was 0.852. It was found that multiple independent variables might be a better the estimation of TOC concentration using the regression model equation(in a given sites).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.3
• /
• pp.619-626
• /
• 1998

The critical etiologic factor in the development of dental caries is dental plaque. The main component of dental plaque is the mutan produced by Streptococcus mutans. The following results were obtained by using blue mutan to assess the factors affecting the mutan-digesting activity of Micromonospora aurantiaca isolated from oral cavity. Micromonospora aurantiaca digested more blue mutan in the minimal essential broth at pH 7.0 than at pH 5.5 or 8.5, and at $37^{\circ}C$ than at $32^{\circ}C\;or\;42^{\circ}C$. Blue mutan was similarly digested at the range of 1mM to 16mM of $CaCl_2$ and 0.1mM to 6.4 mM of $MgCl_2$, while being significantly digested at the concentration of 2.5mM of KCl. When the concentration of glucose was decreased in the minimal essential broth, the digestion of blue mutan was increased. When the culture supernatant of Micromonospora aurantiaca in the RL broth with 1% glucose or 0.5% mutan was mixed with 2 ${\times}$ BHIYS broth containing 0.5% yeast extract and 10% sucrose, the formation of artificial plaque on the orthodontic wires by Streptococcus mutans was inhibited(p<0.05). These results indicated that the production of mutanase was identified in the culture supernatant of Micromonospora aurantiaca, suppressing the formation of artificial plaque by Streptococcus mutans.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.72-80
• /
• 2020

This paper describes the design and fabrication of a BUC(Block Up-converter) which is a component of a FST (Flyaway Satellite Terminal), one of the ET(Earth Terminal) of the military satellite. BUC is physically composed of an up-converter module, a high power amplifier module, a receive band suppression filter, a housing, and a cable assembly. It was designed using simulator AWR to satisfy the electrical characteristics of BUC's such as maximum output power, gain, unwanted signal, and intermodulation. The maximum output power and gain characteristics were measured at 43.4dBm and 51.8dB, respectively. The unwanted wave and intermodulation characteristics were -73.5dBc and -31.9dBc, respectively. Of the electrical requirements of Table 1, not only the above four but also all of the items were confirmed to be satisfied.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.81-89
• /
• 2020

This paper describes the design and fabrication of a LNB(Low Noise Block downd-converter) which is a component of a FST(Flyaway Satellite Terminal), one of the ET(Earth Terminal) of the military satellite. LNB is physically composed of an down-converter module, a low noise amplifier module, a transmit band suppression filter, a isolator, a housing, and a cable assembly. It was designed using simulator (AWR) to satisfy the electrical characteristics of LNB's such as gain, noise figure and unwanted signal. The gain and noise figure characteristics were measured at 61.4dBm and 1.37dB, respectively. The unwanted wave was measured at -66.79dBc. Of the electrical requirements of Table 1, not only the above three but also all other items were confirmed to be satisfied.

• Korean Journal of Health Education and Promotion
• /
• v.30 no.5
• /
• pp.61-77
• /
• 2013

Objectives: The purpose of this study was to evaluate program methods for effective smoking cessation and prevention through systematic review of studies published during recent 3 years in Korea. Methods: Electronic searches were conducted in DBPIA, RISS, KISS and other databases looking for studies published from 2010 to 2012 that dealt with the effects of intervention on smoking prevention and cessation. A total of 25 studies were included in the final analysis. Three independent reviewers critically evaluated the study quality and evidence of effectiveness based on The Community Guide methodology. Results: Multi-component intervention showed strong evidence of effectiveness for adolescents and sufficient evidence for patient smokers. Cognitive-behavioral intervention for adolescents and child-parent interaction program for adults demonstrated sufficient evidence of effectiveness on the smoking cessation and its determinants. There was insufficient evidence showing effectiveness of smoking prevention programs. Conclusion: Improving the quality and quantity of the intervention studies on smoking could help to expand evidence base for effective intervention methods and strategies on smoking.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.3
• /
• pp.324-334
• /
• 1995

Most UIMS(User Interface Management System) adopt dialogue model of user interface Implementation of UIMS influenced by adopted dialogue model of user interface strongly. While the Model-View-Controller framework has contributed to many aspects of user interface development in Smalltalk environment- user interfaces generated with MVC have highly coupled model, view, and controller classes. Such coupling impedes the reuse of software component. So In this paper, we suggest MVCD model to resolve a decline of reuse with MVC have highly coupled. User messages are not changed by Controller immediately, but sent to Dialogue object which maintains the syntatic structure of the interaction. Dialogue object invokes Model object to updates is value. Since Model objects have active values, the value change propagates to the linked Controllers. Finally, Controller object convert the new value and update the View object. User interface builder is implemented on X-window with OSF/Motif that is base on this user dialogue model.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.12-19
• /
• 2000

In the development of a production process scheduling system a collaboration method must be defined for the cooperation among submodules within the system. The blackboard architecture is exploited for solving the collaboration problem, which is one of the problem solving architecture that belongs to the distributed artificial intelligence. The dynamic states of the problem solving processes are presented in the hierarchically constructed shared working memory called as a blackboard. The communication for the collaboration is done through the blackboard. The problem solving steps are contained in the global controller, one of a component that consists the blackboard architecture, as knowledge. The global controller activates proper submodules based on the knowledge. By applying the blackboard architecture the collaboration problem among submodules in the grating production process scheduling system (GPSS) has been solved as well as the system became adaptable to the future modifications and expansions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.6
• /
• pp.498-505
• /
• 2010

In-Wheel System is a high-efficiency system to supply a new concept of platform which raises the efficiency of motor drive system and applies it to an environment-friendly automobile by installing a highly efficient electric motor directly to wheels and removing factors of power train. The proliferation of these systems is directly related to the safety of our lives, so check the reliability of the part in the development phase and should be certified. Reliability is the ability of a system or component to perform its required functions under stated conditions for a specified period of time. This paper presents to the verification methods for durability, one of reliability assessments of the Motor, the study calculated acceleration and deceleration torque and the effective torque from driving conditions of In-Wheel Motor, and based on this, it reduced the test time and suggested the verification methods of In-Wheel Motor reliability through the accelerated life test.