• Journal of The Korean Astronomical Society
• /
• v.47 no.3
• /
• pp.99-104
• /
• 2014

We present the rst period variation study for the Algol eclipsing binary V346 Cyg by constructing the (O-C) residual diagram using all the available precise minima times. We conclude that the period variation can be explained by a sine-like variation due to the presence of a third body orbiting the binary in about $68.89{\pm}4.69$ years, together with a long-term orbital period decrease ($dP/dt=-1.23{\times}10^{-7}day/yr$) that can be interpreted to be due to slow mass loss from the ${\delta}$-Scuti primary component. The sinusoidal variation may also be explained by using the the Applegate (1992) mechanism involving cyclic magnetic activity due to star-spots on the secondary component. The present preliminary solution needs more precise photometric observations to be confirmed.

• Journal of The Korean Astronomical Society
• /
• v.43 no.6
• /
• pp.201-211
• /
• 2010

We present an analysis of the measurements of mid-eclipse times of V839 Oph, collected from literature sources. Our analysis indicates a period increase of $3.2{\times}10^{-7}$ day/yr. This period increase of V839 Oph can be interpreted in terms of mass transfer of rate $1.76{\times}10^{-7}M_{\odot}/yr$, from the less to the more massive component. The O - C diagram shows a damping sine wave covering two different complete cycles of 36.73 yr and 19.93 yr with amplitudes approximately equal to 0.0080 and 0.0043 day, respectively. The third cycle has to be expected to cover about 13.5 years with lower amplitude than those of the former two cycles. These unequal duration cycles show a non periodicity which may be explained as resulting from either the presence of a tertiary component to the system or cyclic magnetic activity variations due to star spots. For the later mechanism, the obtained characteristics are consistent when applying Applegate (1992) mechanism.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10a
• /
• pp.347-350
• /
• 2001

이 논문은 기존의 Use Case 방법론을 개선하려는데 초점을 두고 있다. Use Case 방법론의 설계단계 중, 설계 프랙티스(Design practices)단계에 소프트웨어 테스팅 개념을 적용하였다. 이 방법은 먼저 사용자의 요구 사항을 상호작용 다이어그램을 통해 분석하고, 설계 컴포넌트(Design Component Units)라고 불리는 기능적 컴포넌트들로 새롭게 정의하고 추출한다. 추출된 기반을 바탕으로 생성된 설계 컴포넌트들을 설계 스키마(Design schema)에서 계층구조로 분할하는 방법이다. 여기서 개발자들의 목적에 따라 선택한 수 있도록, 다양한 기준에 적용한 수 있는 여러 가지 설계 컴포넌트들을 정의하였다. 개선된 Use Case 방법론을 토대로 변환 알고리즘[11]을 이용해 새로운 Use Case 툴을 개발하고자 한다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1049-1057
• /
• 2011

Today, most weapon systems operate as component systems of SoS(System of Systems) and they produce synergy effects in the battle field by interoperating. In addition, the acquisition issues on weapon systems have expanded into SoS context including sustainment analysis. Availability is the sustainment KPP(Key Performance Parameter) of weapon systems. In this paper, a simulation model is proposed to analyze the availability of SoS. The simulation model consists of 5 modules: Mission and Task, System, System RBD, Maintenance system and a simulation engine. Then it was implemented and applied to a SoS. As a result of the application, the simulation model could be applied for analyzing the availability of the SoS and provided information about critical tasks and risky component systems to complete the given mission of the SoS.

• Journal of The Korean Association For Science Education
• /
• v.32 no.5
• /
• pp.1007-1026
• /
• 2012

The purpose of this study was to develop analytic framework for dialogic argumentation to show the context and flow visualizing interactions of argumentation, to be able to present quality of argumentation specifically. For this, we formulated a method of the argumentation diagram using feature of diagram simple and structurally visualizing interrelation between argument components, and then quantified quality of argumentation to argument level score on this basis. We have developed the learning material for argumentation about a vertical circular motion and used the obtained translations from applying it in developing the framework. We chose argument statements among full transcript and then coded as Toulmin's argument components, and these codes was effectively arranged and linked to show argumentation diagram. Results by argumentation diagram could be useful understanding of interactive argumentation context and the flow and present frequency, the combination of argument elements, rough qualitative level of argumentation. To quantify argumentation quality, we gave different scores to different link lines reflecting indication of argumentation quality like that diversity of argument component, justification, presence or absence of rebuttals. The process of identification of argument level is very simple, qualitative level of argumentation represented as concrete score could present various and concrete argument level. Developed analytic framework might contribute to argumentation research field, because it can present effectively dialogic argumentation result. Also, various analysis cases might guide designing an effective argumentation practice and circular motion learning.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.11
• /
• pp.1631-1635
• /
• 2007

Japanese Brown cattle, one of the four domestic beef breeds in Japan, are suffering from numerical reduction due to economic pressure from profitable breeds. In this study, all the reproductive cows in the Kouchi sub-breed of the Japanese Brown cattle that were alive in July 2005 were investigated by pedigree analysis to clarify genetic structure and composition of genetic variability. In addition, genetically important individuals for the maintenance of genetic variability of the sub-breed were also identified through the core set method. The number of cows analyzed was 1,349. Their pedigrees were traced back to ancestors born around 1940, and pedigree records of 13,157 animals were used for the analysis. Principal component analysis was performed on the relationship matrix of the cows, and their factor loadings were plotted on a three-dimensional diagram. According to their spatial positions in the diagram, all the cows were subdivided into five genetically distinctive subpopulations of 131 to 437 animals. Genetic diversity of the whole sub-breed, which is estimated to be 0.901, was decomposed into 0.856 and 0.045 of within-subpopulation and between-subpopulation components. Recalculation of genetic diversity after removal of one or several subpopulations from the five subpopulations suggested that three of them were genetically important for the maintenance of genetic variability of the sub-breed. Applying the core set method to all the cows, maximum attainable genetic diversity was estimated to be 0.949, and optimal genetic contributions assigned to each cow supported the previous results indicating relative importance of the three subpopulations as useful genetic materials.

• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.165-175
• /
• 2015

Methods to design programs which implement IT systems have been developed in various forms from flowchart to activity diagram of UML. However, program design tools and methods developed so far have not been efficient comparing to program coding tools and methods. In addition, Program design methods and tools developed until now have been difficult to support the bidirectional conversion between program design and coding, and the improvement of development productivity and maintainability. Therefore, in this study, we propose Convergence Development Method to enable working with wide bandwidth through fusing the program design and coding phase by using SOC and supporting tool named SETL which automatizes the convergence of design and coding. Thus, by using SETL, it is expected that the efficiency gap between the program design and coding phase is reduced, and development productivity and maintainability is increased. key words.

• Journal of The Korean Astronomical Society
• /
• v.10 no.1
• /
• pp.23-30
• /
• 1977

We have collected times of minimum light available in the literature for WZ Andromedae and analyzed the nature of the period variations. The O-C diagram of WZ And clearly shows that two abrupt changes near JD 2418000 and JD 2435000 are deduced by dp/p=$+4.24{\timesa}10^{-6}$ and dp/p=$-2.46{\times}10^{-6}$, respectively. For these period changes, we have introduced the equations which represent mass exchange in the close binery systems given by Biermann and Hall (1973), and the computation yieleled a mass flow of $7.42{\times}10^{-5}M$. from the hotter component to the cooler one. Due to the amount of mass flow, the period decrease may also be calculated. The theoritical new period after JD 2435000 became 0.69565858 days, which is in good agreement with the value 0.69566034 days found in the O-C diagram. In this computation, the mass ratio of WZ And suggested that the hotter star is the filling its Rochclooe, and thus WZ And is in Paczynski's stage II.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2019

Reverse engineering involves examining a system or component so as to comprehend its structure, functionality, and operation. Creation of a system model in reverse engineering can serve several purposes: test generation, change impact analysis, and the creation of a new or modified system. When attempting to reverse engineering a system, often the most readily accessible information is the system description, which does not readily lend itself to use in Model Based System Engineering (MBSE). Therefore, it is necessary to be able to transform this description into a diagram, which clearly depicts the behavior of the system as well as the interaction between components. This study demonstrates how sequence diagrams can be extracted from the systems description. Using MBSE software, the sequence diagrams for the Engineered Safety Features Component Control System (ESF-CCS) of the Nuclear Power Plant are created. Sequence diagrams are chosen because they are a means of representing the systems behavior and the interaction between components. In addition, from these diagrams, the system's functional requirements can be elicited. These diagrams then serve as the baseline of the reverse engineering process and multiple system views are subsequently be created from them, thus speeding up the development process. In addition, the use of MBSE ensures that any additional information obtained from auxiliary sources can then be input into the system model, ensuring data consistency.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.1
• /
• pp.24-28
• /
• 2009

This study was conducted to evaluate the growth characters and yield components of 18 collected sesame cultivars to get basic information on the variation for the sesame breeding using principal component analysis. All characters except days to flowering, days to maturity and 1,000 seed weight showed significantly different. Seed weight per 10 are showed higher coefficient of variance. Capsule bearing stem length and liter weight showed positive correlation with seed yield per 10 are. The principal components analysis grouped the estimated sesame cultivars into four main components which accounted for 83.7% of the total variation at the eigenvalue and its contribution to total variation obtained from principal component analysis. The first principal component ($Z_1$) was applicable to increase plant height, capsule bearing stem length and 1,000-seed weight. The second principal component ($Z_2$) negatively correlated with days to flowering and maturity by which it was applicable to shorten flowering and maturity date of sesame. At the scatter diagram, Yangbaek, Ansan, M1, M2, M4, M7 and M9 were classified as same group, but M10, Yanghuk, Kanghuk, M5, M6, M12 and M13 were classified as different group. This results would be helpful for sesame breeder to understand genetic relationship of some agronomic characters and select promising cross lines for the development of new sesame variety.