• Journal of Astronomy and Space Sciences
• /
• v.26 no.1
• /
• pp.99-110
• /
• 2009

The main purpose of the current research is to developments a real-time Hardware In-the-Loop (HIL) simulation testbed for the satellite formation flying navigation and orbit control. The HIL simulation testbed is integrated for demonstrations and evaluations of navigation and orbit control algorithms. The HIL simulation testbed is composed of Environment computer, GPS simulator, Flight computer and Visualization computer system. GPS measurements are generated by a SPIRENT GSS6560 multi-channel RF simulator to produce pseudorange, carrier phase measurements. The measurement date are transferred to Satrec Intiative space borne GPS receiver and exchanged by the flight computer system and subsequently processed in a navigation filter to generate relative or absolute state estimates. These results are fed into control algorithm to generate orbit controls required to maintain the formation. These maneuvers are informed to environment computer system to build a close simulation loop. In this paper, the overall design of the HIL simulation testbed for the satellite formation flying navigation and control is presented. Each component of the testbed is then described. Finally, a LEO formation navigation and control simulation is demonstrated by using virtual scenario.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.5
• /
• pp.316-325
• /
• 2012

In this study, we suggested adequate control technology by analyzing emission process and main chemical of VOC/HAPs generated from four paint factories in Busan area. And we estimated whether Kapok fiber, which is a natural material, can be commercially used for an absorbent by testing adsorption ability. As a result of this sturdy, above 60% of VOC/HAPs was volatilized and dispersed inside the working place without conducting control system of facilities during manufacturing paints. Concentration profile of VOC/HAPs, which is volatile naturally outside the factories, is surveyed above 70% at Toluene, Ethylbenzene, and Xylene. And a result of evaluation of odor attribution level about the component whose Odor Threshold is known, it is estimated that major cause material of A, B, C factories is Toluene and that of D factory is m/p-Xylene. And that result presented design arguments such as facilities specifications, activated carbon filling volume, and replace cycle of activated carbon as control technology. Also, that result presented emission process improvement such as adsorption of central-controlled ventilation device, installation of inlet flenge, and potable cleaning process. The rate of pollutant adsorption of Kapok fiber, which is natural material, is indicated about 91.9%, 66.7%. That result validated the possibility as replacement of activated carbon.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.11
• /
• pp.39-54
• /
• 2018

Purpose - To success, in spite of deficient resources, a start-up company has to check various circumstances. Many researchers proposed different appraisal methods for technology commercialization. But everybody agrees Merrifield is the first one, who is a pioneer of an appraisal model of technology commercialization. After he proposed it, many researchers and field workers developed a more complicated model, which called a BMO model. In this research, considering the circumstances of start-ups that lack available resources, it proposes a new appraisal method for technology commercialization, which is named a weighted-BMO model. Research design, data, and methology - For the new BMO-model, it studied the preceding studies. And it found that the success factors for start-ups were correlated with technology commercialization. After comparing the success factors for technology commercialization of start-ups with BMO appraisal factor, it withdraws the net BMO appraisal model: which we are calling the weighted-BMO model. Results - This study found a few things. First, actually, the BMO appraisal factors related with the success factors of technology commercialization. Second, the weighted-BMO model, which included the entrepreneur ability factor, was more accurately estimated the success of technology-based start-ups than the BMO model. Third, it overcame the weakness of the BMO-model, which did not include quantitative factors. In addition to evaluating the feasibility of the BMO model, we also presented a strategy for the future direction. But, still, it included a few shortcomings, which we are calling the arbitrage of weighted value. Sometimes, the intentional weighted value can deliberate the different valuation. Conclusitons - Due to this study, the weighted-BMO model included appraisal factors related with the success factors of technology commercialization and the entrepreneur ability factor, and quantitative factors. When evaluating the combined score of the existing Merrified BMO components, 35 points of the first pass criterion accounted for 29.17% of the total score, and 80 points of the merit score of the second rank criterion were 66.67% Considering that the weighted sum is taken into account, the baseline score of the weighted summing method for each component of the modified BMO model is 2.92 points, which is 29.17% of the weighted sum total of 10 points. The evaluation score was 6.67 points, 66.67% of the weighted total score of 10 points.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.26-37
• /
• 2020

This study intends to present a fragility analysis method suitable for concrete cable-stayed bridges by performing an analysis reflecting design criteria and material characteristics from the results of inelastic time-history analysis. In order to obtain the fragility curve of the cable-stayed bridge, the limit state of the main component of the cable-stayed bridge is determined, and the damage state is classified by comparing it with the response value based on inelastic time history analysis. The seismic fragility curve of the cable-stayed bridge was made by obtaining the probability of damage to PGA that the dynamic response of the vulnerable parts to input ground motion would exceed the limit state of each structural member. According to the pylon's fragility curve, the probability of moderate damage at 0.5g is 32% for the longitudinal direction, while 7% for the transversal direction, indicating that the probability of damage in the longitudinal direction is higher in the same PGA than in the transversal direction. The seismic fragility curve of the connections showed a very high probability of damage, meaning that damage to the connections caused by earthquakes is very sensitive compared to damage to the pylon and cables. The cable's seismic fragility curve also showed that the probability of complete damage state after moderate damage state gradually decreased, resulting in less than 30% probability of complete damage at 2.0g.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.107-118
• /
• 2015

Many approaches to agent collaboration have been introduced in military war-games, and those approaches address methods for simulation entity (actor) collaboration within a team to achieve given goals. To meet fast-changing battlefield situations, an actor must be loosely coupled with their tasks and be able to take over the role of other actors if necessary to reflect role handovers occurring in real combat. Achieving these requirements allows the transfer of tasks assigned one actor to another actor in circumstances when that actor cannot execute its assigned role, such as when destroyed in action. Tight coupling between an actor and its tasks can prevent role handover in fast-changing situations. Unfortunately, existing approaches and war-game strictly assign tasks to actors during design, therefore they prevent the loose coupling. To overcome these shortcomings, our Role-based Command Hierarchy (ROCH) model dynamically assigns roles to actors based on their situation at runtime. In the model, "Role" separates actors from their tasks. In this paper, we implement the ROCH model as a component that uses a publish-subscribe pattern to handle the link between an actor and the roles of its subordinates (other actors).

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.3
• /
• pp.27-36
• /
• 2004

Detection and recognition of human faces in images can be considered as an important aspect for applications that involve interaction between human and computer. In this paper, we propose a face recognition method using eigenfaces and fuzzy neural networks. The Principal Components Analysis (PCA) is one of the most successful technique that have been used to recognize faces in images. In this technique the eigenvectors (eigenfaces) and eigenvalues of an image is extracted from a covariance matrix which is constructed form image database. Face recognition is Performed by projecting an unknown image into the subspace spanned by the eigenfaces and by comparing its position in the face space with the positions of known indivisuals. Based on this technique, we propose a new algorithm for face recognition consisting of 5 steps including preprocessing, eigenfaces generation, design of fuzzy membership function, training of neural network, and recognition. First, each face image in the face database is preprocessed and eigenfaces are created. Fuzzy membership degrees are assigned to 135 eigenface weights, and these membership degrees are then inputted to a neural network to be trained. After training, the output value of the neural network is intupreted as the degree of face closeness to each face in the training database.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.29 no.1
• /
• pp.369-391
• /
• 2018

The purpose of this study was to develop a measurement scheme that assesses organizational performances in library department unit level by applying PCSI model, a Public-service Customer Satisfaction Index. Specifically, this study adopted the Antecedent Model, a component of the PCSI's three-part model, that consists of a total of 12 service quality indices. The study selected a large-scale library as a case to analyze and design a method. We analyzed the library's organizational missions and goals set by each of its six departments, and then mapped them with each of the 12 service quality indices. This mapping was further developed as a work analysis scheme of the library and as a measurement tool. A total of 341 library users participated in a survey that was designed to assess 12 service quality indices. As a result service quality was measured for each index, which in turn, calculated the library's service performance index for both entire and individual units of the library. The results reveled the measurement tool useful in assessing service performances for both individual unit and the entire library.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.239-246
• /
• 2013

This study observed changes of understory vegetation to evaluate the role of forest aggregate after 15% aggregated retention harvest in mature oak forest (> 100 years) in Gyungsangbukdo Bonghwagun in 2010 and 2011. Spontaneous responses of understory vegetation cover (%), species richness, abundance of plant growth forms (herbaceous and woody plants), and overall attributes (by Ordination analysis) were estimated in aggregate area (0.15 and n=36) and clear cut area (0.85 and n=192) in experimental site and control site (1 and n=300). Based on ordination analysis, overall change of species composition in aggregated sites were relatively lower than in harvest area. Right after treatment, total cover of cutted area slightly decreased from 15.6% to 14.7%, and species richness increased from 14 species to 22 species. Cover and richness in the both of aggregate and control sites increased. In plant growth forms, 15% aggregate harvest revealed positive effects on the abundance (cover and richness) of herbaceous plants than woody group. After retention treatment, overall, edge effect likely played major component of vegetation changes in aggregate forest and in harvested area, mechanical damage from harvest operation and change of forest structure by clear cutting were critical. As pre-treatment data, which are rare in ecological studies in Korea, were critical for interpretation between patterns that may have arisen from spatial distributions in the original forest, our experimental design have higher opportunity for long term monitoring on the effect of forest aggregate and vegetation regeneration in clear cutted area.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.139-156
• /
• 1995

A set of field investigations was performed to estimate accurately the predominant periods of seismic 8round motions and the attenuation characteristics of the seismic ground vibration. Predominant periods of ground motions were estimated from the measurement of the continuous microseismic vibratins of certain periods, inherent in the ground and in the buildings, utilizing the high sensitivity digital velocity seismometer consisting of 3-component geophones and a digital seismograph. Estimated predominant periods of microseismic vibraion of the ground(measured on'the ground surface) and the building (measured on the second floor) were in the range of 0.18~0.235 sec. and 0.26~0.31 sec. respectively. The subsurface structure of the site ground was surveyed by the seismic refraction method utilizing the digital seismicwave probing system. The ground structure was found to be a two-layered system : an upper top soil layer of 7m in thickness with the P-wave velocity of 662m1sec and a lower layer of silty-clayey soils with the P -wave velocity of 2210m1 sec. The attenuation characteristics of the seismic ground vibrations were determined by the amplitude decay measurement method us;ng the Seisgun, which produces strong artificial seismic energy. Measured spatial attenuation coefficients of the ground vibration in vertical(Z) longitudinal(X), transverse(Y) direction were 0.1137, 0.0025, and 0.0290 respectively. Estimated Spartial QP's (inverse of the specific dissipation constant w.r.t. shear waved of X, Y, and Z directions were in the range of 5.913~7.575, 32.371~41.452, 2.794~3.579 re spectively. This indicates that aseimic design of the structures on the site should take stronger consideration regarding the earthquake resistance characteristics of the structures against longitudinal ground motion.

• The KIPS Transactions:PartD
• /
• v.17D no.2
• /
• pp.129-146
• /
• 2010

Nowadays, XML has been favored by many companies internally and externally as a means of sharing and distributing data. there are many researches and systems for modeling and storing XML documents by an object-oriented method as for the method of saving and managing web-based multimedia document more easily. The representative tool for the object-oriented modeling of XML documents is UML (Unified Modeling Language). UML at the beginning was used as the integrated methodology for software development, but now it is used more frequently as the modeling language of various objects. Currently, UML supports various diagrams for object-oriented analysis and design like class diagram and is widely used as a tool of creating various database schema and object-oriented codes from them. This paper proposes an Efficinet Query Modelling of XML-GL using the UML class diagram and OCL for searching XML document which its application scope is widely extended due to the increased use of WWW and its flexible and open nature. In order to accomplish this, we propose the modeling rules and algorithm that map XML-GL. which has the modeling function for XML document and DTD and the graphical query function about that. In order to describe precisely about the constraint of model component, it is defined by OCL (Object Constraint Language). By using proposed technique creates a query for the XML document of holding various properties of object-oriented model by modeling the XML-GL query from XML document, XML DTD, and XML query while using the class diagram of UML. By converting, saving and managing XML document visually into the object-oriented graphic data model, user can prepare the base that can express the search and query on XML document intuitively and visually. As compared to existing XML-based query languages, it has various object-oriented characteristics and uses the UML notation that is widely used as object modeling tool. Hence, user can construct graphical and intuitive queries on XML-based web document without learning a new query language. By using the same modeling tool, UML class diagram on XML document content, query syntax and semantics, it allows consistently performing all the processes such as searching and saving XML document from/to object-oriented database.