• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.137-147
• /
• 2014

PURPOSES : Daejeon is basically divided into an old downtown and a new downtown, and the recent relocation of the Chungcheongnam-do Provincial Government of Republic of Korea from the old downtown and the opening of governmental buildings in the new downtown as well have made this new downtown only densely populated with industrial and business facilities. Such changes in the downtowns have promoted the conditions of the new downtown while, consequently, dragging down the old downtown. Out of concern for those unbalanced developments of the two downtowns, Daejeon is now carrying out several city projects to revive the old downtown. In the light of that, as a part of the project to promote the old downtown, this study aims to conduct an evaluation on landscape of the culture and arts street in Daeheungdong which was built upon those ideas of a theme street project by Daejeon. METHODS : Based on the findings from the questionnaire not only on the components that would design the streetscape of the culture and arts street but also on the public satisfaction with the streetscape, the study defined how those changes in the components affect emotional factors of the pedestrians. In order to achieve the research goal, the study made changes in D/H ratio of the street structural components as well as the roadside trees. In terms of the questionnaire method, the study used the SD scale, and proceeded with its investigation through the frequency analysis, the principal component analysis (the factor analysis) and the structural equation model. RESULTS : According to the results from the factor analysis and the regression analysis, of those three factors, such as the openness, the comfortable sensation and the safety, the openness followed by the comfortable sensation and the safety was determined to have the most positive influence on the total satisfaction. The structural model analysis reported that the D/H and the structural components of the roadside trees and planting have a positive effect on the emotional image, and this emotional image also appeared to be positively related to the total satisfaction. CONCLUSIONS : This study looked into how the changes in the street structural components of the culture and arts street in Daeheungdong would affect the satisfaction with the streetscape, and finally confirmed that the D/H and the planting are what would have a positive effect on this satisfaction. What has been learned from this study will be the basic data to figure out how to promote and improve the culture and arts street in Daeheung-dong as this data will also help designing and developing of those specialized streets in other regions.

• Journal of Korean Society of Transportation
• /
• v.18 no.6
• /
• pp.7-17
• /
• 2000

The Purpose of this study is to test the effectiveness of Special Transportation Management Zone system (TZ) when it is applied to Dongdaemoon commercial zone located in downtown Seoul. The study consists of two Parts ; the legal components of TZ and the case study on Dongdaemoon district. The case study includes the analysis of current traffic situation on the study zone, the design of implemention alternative for each component of TZ, the framework of impact analysis system, and the analysis results. The study finds, if 2,000 won mandatory parking fee on drivers parking in the buildings only with over 10 parking spaces and over 3.000$m^2$ in floor area, strong illegal parking enforcement, and Pro-hibition of parking passenger cars whose last digit plate number matches with the last digit of date, are implemented in the zone simultaneously, the traffic speed increases to 20.56km/h which is above the target set in the zone. In conclusion, we find that TZ2 can be an effective tool relieving traffic congestion in Seoul, and that it is necessary for introducing TZ in Seoul that relevant laws should be revised and expecting problems should be overcome.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.129-142
• /
• 1998

This research is focused on the inducement of the constitutive equation considering the creep strain component and on the development of a finite element method program. The purpose of this research was to contribute to the design of construction structures or to the construction management in soft clay ground through predicting the long-term strain of construction structures reasonably bused on the above program. Modified Cam Clay model was adopted to describe the elastic-plastic behavior of clayey soil. And in the calculation of the creep sprain, the secondary coefficient of consolidation C. was applied for considering the volumetric creep element and the constants m, $\alpha$, A were rosed by the empirical creep equation proposed by Singh 8E Mitchell for considering the deviatoric creep element. To examine the reliability of the program which is developed in this study, the estimated values by this program were compared with the theoretical solution and the experimental results. And the applicability of the developed program was found to be reliable from the sensitive analysis of each parameters used in this study. According to the results obtained from the application of the program on the field measurement data, the estimated values by the program were found with be consistent with the actual values. And from the analysis of the displacement of embankments, the case of considering the creep behavior induced much fower errors than the case of neglecting it. But the results obtained from considering the volumetric creep behavior only were slightly underestimated the results from considering the deviator creep behavior showed the slightly overestimated values. Therefore, it remains the task of further studios to develop the laboratory test devices to obtain the reliable creep parameters, and to select the appropriate soil parameters, etc.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.5
• /
• pp.653-659
• /
• 2017

Objective: This trial was performed to examine the effects of ruminally degradable starch (RDS) levels in total mixed ration (TMR) with low corn-based starch on the milk production, whole-tract nutrient digestibility and nitrogen balance in dairy cows. Methods: Eight multiparous Holstein cows (body weight [BW]: $717{\pm}63kg$; days in milk [DIM]: $169{\pm}29$) were assigned to a crossover design with two dietary treatments: a diet containing 62.3% ruminally degradable starch (% of total starch, low RDS) or 72.1% ruminally degradable starch (% of total starch, high RDS). Changes to the ruminally degradable levels were conducted by using either finely ground corn or steam-flaked corn as the starch component. Results: The results showed that dry matter intake, milk yield and composition in dairy cows were not affected by dietary treatments. The concentration of milk urea nitrogen was lower for cows fed high RDS TMR than low RDS TMR. The whole-tract apparent digestibility of neutral detergent fiber, acid detergent fiber and crude protein decreased, and that of starch increased for cows fed high RDS TMR over those fed low RDS TMR, with no dietary effect on the whole-tract apparent digestibility of dry matter and organic matter. The proportion of urinary N excretion in N intake was lower and that of fecal N excretion in N intake was higher for cows fed high RDS TMR than those fed low RDS TMR. The N secretion in milk and the retention of N were not influenced by the dietary treatments. Total purine derivative was similar in cows fed high RDS TMR and low RDS TMR. Consequently, estimated microbial N flow to the duodenum was similar in cows fed high RDS TMR and low RDS TMR. Conclusion: Results of this study show that ruminally degradable starch levels can influence whole-tract nutrient digestibility and nitrogen balance in dairy cows fed low corn-based starch diets, with no influence on performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.955-967
• /
• 2016

As transportation systems for connecting lands and islands, oversea long-span bridges, underwater tunnels, and immersed tunnels have been mainly used so far. Submerged floating tunnels (SFTs) moored under specific water depth are one of the newest oversea transportation system. Compared to other existing systems, the new system requires relatively less construction cost and time. But, there is still no construction example. For reasonable design of the tunnel and mooring lines the rational structural analysis should be firstly performed. Unlike common transportation structures, the submerged tunnels are mainly affected by the wave, vary irregular excitation component. So, the analysis scheme might be difficult because of the characteristics of the submerged structures. This study aims to suggest the rational global performance analysis methodology for the submerged tunnels. Using ABAQUS the dynamic response of the experimental models studied by KIOST (2013) was investigated considering regular waves. By comparing the simulation results with the experimental results, the feasibility of the numerical simulation was verified. Using the suggested method, the effects of initial inclination of the tethers and draft of the tunnel on the dynamic behavior were studied. In addition, dynamic response of a SFT under the irregular wave was examined.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.11
• /
• pp.979-986
• /
• 2016

The tripod shafts of constant-velocity joint are used in both the trains KTX and KTX-sanchon. It is an important component that connects the motor reduction unit and the axle reduction unit in a power bogie. The tripod shaft not only transmits drive and brake torque in the rotational direction, but also slides in the axial direction. If the drive system is loaded with an excessive torque, the fuse part of the shaft will be fractured firstly to protect the other important components. In this study, a rig was developed for conducting torsion tests on the tripod shaft, which is a type of mechanical fuse. The tripod shafts were subjected to torsional fracture test and torsional fatigue test on the rig. The weak zone of the tripod shaft was identified, and its fatigue life was predicted using finite element analysis (FEA). After analyzing the FEA results, design solutions were proposed to improve the strength and fatigue life of the tripod shaft. Furthermore, the deterioration trend and time for failure of the tripod shaft were verified using the hysteresis loops which had been changed with the advancement of the torsional fatigue test.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.3
• /
• pp.901-907
• /
• 2012

Objective: Cumulative evidence suggests that MLH1, the key component in the mismatch pathway, plays an important role in human cancers. Two potential functional polymorphisms (-93G>A and I219V) of MLH1 have been implicated in cancer risk. The aim of this meta-analysis was to summarize the evidence for associations. Methods: Eligible studies were identified by searching the electronic literature PubMed, ScienceDirect and Embase databases for relevant reports and bibliographies. Studies were included if of case-control design investigating MLH1 polymorphisms (-93G>A and I219V) and cancer risk with sufficient raw data for analysis. Odds ratios (OR) and 95% confidence intervals (95% CI) were used to evaluate the strength of associations. Results: Our meta-analysis from 33 published case-control studies showed the variant A allele of -93G>A polymorphism to be associated with increased risk in all genetic models (AA vs. GG: OR = 1.22, 95% CI: 1.03-1.44), especially among non-Asians (AA vs. GG: OR = 1.28, 95% CI: 1.04-1.58). For the I219V polymorphism, however, there was no main effect associated with overall cancer risk in any genetic model. Conclusions: The meta-analysis suggested that the MLH1 -93G>A polymorphism may be a biomarker of cancer susceptibility. Large sample association studies and assessment of gene-to-gene as well as gene-to-environment interactions are required to confirm these findings.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.416-422
• /
• 2016

Lots of plastics are widely used in a variety of industrial field. And the amount of plastic waste is massively produced. In the study of waste recycling, it is emerged as an important issue to prevent the waste of potentially useful resource materials as well as to reduce ecological damage. So, the recycling of plastic waste has been currently paid attention to from the view point of reuse. Existing automatic sorting system consist of near infrared ray (NIR) sensors to classify the types of plastics. But the classification of black plastics still remains a challenge. Black plastics which contains carbon black are not almost classified by NIR because of the characteristic of the light absorption of black plastics. This study is focused on handling how to identify black plastics instead of NIR. Raman spectroscopy is used to get qualitative as well as quantitative analysis of black plastics. In order to improve the performance of identification, Support Vector Machine(SVM) classifier and Principal Component Analysis(PCA) are exploited to more preferably classify some kinds of the black plastics, and to analyze the characteristic of each data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1241-1248
• /
• 2010

In large-scale production of hydrogen, a PHE (Process Heat Exchanger) is a key component because the heat required to carry out the Sulfur-Iodine chemical reaction that yields hydrogen is transferred from a VHTR (Very High Temperature Reactor) by the PHE. Korea Atomic Energy Research Institute established a helium gas loop for conducting performance test of components that are used in the VHTR. In this study, as a part of high-temperature structural-integrity evaluation of a designed PHE prototype that is scheduled to be tested in the helium gas loop, we carried out high-temperature structural-analysis modeling, thermal analysis, and thermal-expansion analysis for the designed PHE prototype. An appropriate constraint condition is proposed at the end of the in-flow and out-flow pipelines of the primary and secondary coolants and the proposed constraint condition will be applied to the design of the performance-test loop setup for the designed PHE prototype.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.67-70
• /
• 2000

최근 네트워크 서비스 및 분산 컴퓨팅 환경의 급격한 발전과 더불어 인터넷 기반 지리정보 시스템과 이 기종 시스템간에 상호 운용성을 지원하는 분산 지리정보시스템의 기술이 혁신적으로 발전하게 되었다. 현재 이러한 상호 운용성과 더불어 기 구축된 시스템의 재 사용성을 극대화하기 위하여 개방형 컴포넌트 소프트웨어 기술이 발표[1]되었으며, 최근 발표되는 지리정보시스템들도 이러한 개방화와 컴포넌트화 기술을 채택하여 개발되고 있다. 이러한 개방형 컴포넌트 소프트웨어 기술은 컴퓨터 소프트웨어 산업 전반에 커다란 파급 효과를 끼치고 있다. 지리정보시스템 분야에서는 OpenGIS Consortium(OGC)을 주축으로 하여 개방형 컴포넌트 지리정보시스템을 위한 표준 구현 사양을 발표하고 있으며, 이러한 표준 사양을 수용한 제품들이 개발되고 있는 실정이다. 본 논문에서는 분산 환경에서 다양한 관계형 데이터베이스시스템을 이용하여 OGC가 제시한 OLE/COM 기반의 데이터 제공자 컴포넌트의 설계 및 구현에 중점을 두고 있다. 본 시스템의 데이터 제공자 컴포넌트는 순수한 관계형 데이터베이스시스템 기반 위에서 구성되므로, 우선 OGC에서 요구하는 GIS 관련 핵심 기능들을 제공하기 위해서 우선 관계형 데이터베이스와 ODBC를 이용하여 공간엔진을 구성하고 있다. 본 공간 엔진은 OGC 사양을 충족하기 위해서 이용되는 최소한의 기능-공간데이터 관리 기능, 공간 연산 처리, 공간 색인 기능 그리고 클라이언트와 통신하기 위한 기능-들을 포함하고 있다. 그러므로 본 논문에서는 이러한 공간 엔진의 기반 위에서 OGC OLE DB 제공자 컴포넌트의 설계 및 구현 방법에 대해서 자세히 살펴보고 실제 SQL Server 7.0 환경에서 구축된 공간 엔진 및 OLE DB 제공자 컴포넌트의 구현 예에 대하여 살펴볼 것이다. 혈액내방사선 조사량이 안전용량 범위(200rad)에 속하며 48시간 후 체내잔류량은 서양인과 큰 차이가 없었다.비출현의 소견을 보이는 악성종양 환자의 골 신티그람 53개중 44개 (83.0%)에서 척추 및 늑골에 미만성, 또는 다발성 침습이 관찰되었다. 또 골전이 부위를 두개골, 척추, 견대부, 늑골, 골반, 사지의 근위부 장골의 6개 부위로 나누어 분석할 경우 49개(92.5%)에서 3부위 이상에 전이가 발견되었고, 35개(66.0%)에서 4부위 이상에 전이가 발견되었으며, 5부위 이상, 6개 부위에 모두 전이가 발견된 것은 각각 20개 (37 7%), 11개(20.8%)이었다. 이상의 성적으로 보아 악성종양 환자의 골 신피그라피에서 신장 영상의 비출현은 종양의 광범위한 골전이를 간접적으로 시사하는 소견으로 생각된다. 여러 악성종양중 전립선암에서 신장 영상 비출현의 빈도가 가장 높았으며, 특히 위암에서 골전이 및 신장 영상 비출현의 빈도가 높음은 주목할 만한 것이라 하겠다.출한 결과 인,규소 증가와 자가영양성 미소플랑크톤(ANP)증가에 미치는 요인이 해안과 외해에서 동일하게 가장 큰 설명력을 보였다. N:P 비도 해안에서 36.4, 외해에서 32.6을 보이고 있어 인이 상당히 부족한 것으로 나타났다. 따라서 조사해역은 인이 식물플랑크톤 성장에 중요한 제한요인으로 작용하고 있다고 판단된다.의 회전. 전위력의 강도, 적용시점, 그리고 키, 체중등의 신체적 요인 등이 있으나 능숙한 기계사용과 정확한 슬관절 위치에서 검사할 때 전방 십자 인대 파열에 대한 진단에 유용한 기구이다.태라고 하였다. 본 연구에서는 이러한 근거를 바탕으로 개방형 문제의 유형을 다양한 답이 존재하는 문제, 다양한 해결 전략이 가능한 문제, 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중