• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.213-217
• /
• 1999

An expert system is developed for rational and efficient design of multi-component injection molding which is a fairly new manufacturing technique to produce plastic parts by injecting two or more materials sequentially using multiple injection units in a single machine into a single rotary mold. The knowledge base used in the present design system is primarily composed of two parts ; knowledge from domain expert and knowledge from CAE analysis. The present expert system has hour main modules ; general design guidelines for injection molding specific guidelines for multi-component injection molding redesign guidelines from the result of the CAE analysis and finally troubleshooting for multi-component injection molding. To show the validity of the present design methodology two shop floor design problems were tested ; design and fabrication of timing belt cover and power window's assist knob by using multi-component injection molding.

• 디지털산업정보학회논문지
• /
• 제8권2호
• /
• pp.177-188
• /
• 2012

GIS provides the various analyzing and displaying using diverse spatial data have supported the powerful functionality and friendly user-interface. But, early GIS software is developed as package tool, it have many difficulties with reducing the cost of developing GPS application and satisfying the various user requirements. At present, the developed GPS applications across multiple domains, despite the common features are built separately for each domain in terms of software engineering development followed out waste of time and money expenditure. However, common features between GPS applications, if deployed as a component assembly and reuse components in terms of enabling the two kinds of component-based development can bring out the beneficial results. In this paper, we described the Analysis and design of GPS ApplicationsS based on Component. Each GPS component is composed of many objects accomplish the atomic service processing and cooperate with each other. And, GPS components meets the qualifications of thc low cost of developing GPS application because of the reusability and re-composition.

• 대한산업공학회지
• /
• 제33권2호
• /
• pp.254-264
• /
• 2007

This paper considers a scheduling problem to minimize the total weighted completion time in the two-stage assembly-type flowshop. The system is composed of multiple fabrication machines in the first stage and a final-assembly machine in the second stage. Each job consists of multiple components, each component is machined on the fabrication machine specified in advance. The manufactured components of each job are subsequently assembled into a final product on the final-assembly machine. The objective of this paper is to find the optimal schedule minimizing the total weighted completion time of jobs. Three lower bounds are derived and tested in a branch-and-bound (B&B) Procedure. Also, three heuristic algorithms are developed based on the greedy strategies. Computational results show that the proposed B&B procedure is more efficient than the previous work which has considered the same problem as this paper.

• 한국컴퓨터정보학회논문지
• /
• 제24권6호
• /
• pp.125-133
• /
• 2019

This study aimed to investigate the political system related to the Electronic Government Law by analyzing the process of the common initiative of the law. To achieve the goal, this study applied the method of social analysis and sugessted the proper role of the assembly for realizing the electronic government and its control. The data were gathered from the bill information service of the national assembly. Netminer 4.0 was used for refining and analyzing data. The results are as follows. First, by analyzing three centrality(degree, betweenness, and eigenvector) of assembly member, the network effect of the powered party and reelected members were revealed as strong in the network. Second, through the component analysis, 5 sub-network has shown in total. The sub-networks showed two distinctive difference between two big parties. By the difference, members in two parties showed different characteristics in constituting communities and the effect of the powered party revealed as strong and clear. Based on the result, this study demonstrated the necessity of social solidarity rather than solipsism in committing common initiative. And a chronological research is need to anlayze $18^{th}$ and $19^{th}$ assembly to verify the effect of the powered party in prospect study.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 추계 종합학술대회 논문집
• /
• pp.408-411
• /
• 2004

본 논문에서는 컴포넌트의 메소드 호출이나 변경 없이 조립하기위해 본 논문에서는 컴포넌트를 연결하는 커넥터를 자동생성에 관한 연구를 하였다. 커넥터는 컴포넌트 포트의 정의, 명세와 아키텍처 구조에 의해 자동으로 생성이 된다. 생성된 커넥터를 통해 컴포넌트가 조립이 되는 것이다.

• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.19-22
• /
• 2008

For the assembly and evaluation of solid immersion lens (SIL) optical head which is the key component of SIL based near field recording (NFR) technology, we modify the Twyman-Green interferometer. Super-hemisphere SIL optical head for the surface recording is assembled and evaluated by the modified Twyman-Green interferometer. In order to verify the optical performance of the assembled SIL optical head, we compare the measured results of the SIL optical head with the simulation ones. Finally, we show the feasibility of applying the assembled SIL optical head to near field recording system by the experiment of the dynamic gap control based on test bed.

• 대한전기학회논문지
• /
• 제39권4호
• /
• pp.414-427
• /
• 1990

This paper presents the development of the graphic simulator for an assembly workcell. The assembly workcell consists of two PUMA 560 manipulators, a conveyor belt system, a work table, and a vision sensor. In this study, the Petri Net theory is applied to model the assembly workcell and to construct the simulator. The event scheduling approach is used to simulate the cell. In order to show the graphic display of the simulation process, robot modelling, component modelling, and world modelling are included. The developed simulator is used to display the transition of the system state during the simulation. It is also used as a tool in selection the best resource states by studying the performance of the system as the resource states are changed.

• Nuclear Engineering and Technology
• /
• 제29권5호
• /
• pp.375-384
• /
• 1997

Relative power density distributions of the Kori Unit 1 pressurized water reactor are calculated by Monte Carlo modeling with the MCNP code. The Kori Unit 1 core is modeled on a three-dimensional representation of the one-eighth of the reactor in-vessel component with reflective boundaries at 0 and 45 degrees. The axial core model is based on half core symmetry and is divided into four axial segments. Fission reaction density in each rod is calculated by following 100 cycles with 5,000 test neutrons in each cycle after starling with a localized neutron source and ten noncontributing settle cycles. Relative assembly power distributions are calculated from fission reaction densities of rods in assembly. After 100 cycle calculations, the system converges to a k value of 1.00039 $\geq$ 0.00084. Relative assembly power distribution is nearly the same with that of the Kori Unit 1 FSAR. Applicability of the full-scope Monte Carlo simulation in the power distribution calculation is examined by the relative root moan square error of 2.159%.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.101-103
• /
• 2006

DSME has developed Sub-assembly Welding Robot System(SWRS) in order to increase the productivity of arc welding and to improve hazard and unclean environments in shipbuilding. DSME's SWRS includes a number of equipments such as four overhanging 6-axis articulated robot manipulators(10kg pay-load), gantry system, vision system detecting the workpiece automatically, and OLP system using the CAD data and a central control system integrating an anti-collision module. The SWRS was installed in CAS(Component Assembly Shop) of DSME's OKPO shipyard in August 2006, and now SWRS is running well in site.

• 연구논문집
• /
• 통권32호
• /
• pp.23-34
• /
• 2002

Up to now, collimators have teen generally produced by handwork and only a few companies have produced by semi-automatic system. Under this situation, automatic system for assembly of optical collimators has risen as a mast essential technique in the development of optical communication components. In this study, it was constructed to develop optical collimators with high functionality and we manufactured optical collimators with a GRIN rod lens and spherical lens using automatic system. Therefore, we worked a performance test through a comparison of collimators made by automatic system and handwork with angle augment, bean size. Also we selected a optimum assembly condition of GRIN rod lens and spherical lens. As a result, it brought a reduction of the tact time and an improvement of an efficiency and a productivity of optical collimators, therefore it was found that automatic system was indispensable for materialization of optical collimators with high functionality.