• 대한예방한의학회지
• /
• 제27권1호
• /
• pp.89-98
• /
• 2023

Objectives : This study collected sleep information by wearable device in the Korean medicine Daejeon citizen cohort (KDCC). It was measured based on the sleep record information measured by wearing a Fitbit, and the possibility of clinical use was examined for compliance with objective sleep collection. Based on compliance, the possibility of clinical use was examined. Methods : After surveying personal information and PSQI(Pittsburgh Sleep Quality Index), sleep information was collected by Fitbit for 14 days. Compliance was measured based on sleep record information by Fitbit. Compliance was analyzed by sex, age, BMI(Body Mass Index), and sleep group(deep/poor). Results : The number of participants was 730, and the compliance was 94.3%, and the compliance group was 675(92.5%). The age of the participants varied from 30 to 60 years old, and the average age was 46±6.7 years. There were 218 males and 512 females. Young people have high compliance. Males are more compliance than females. As the BMI score decreased in the 30s, the compliance was higher. The underweight group in all age groups had 100 compliance. The underweight group was all female. The low compliance groups were that 30 years males (obesity level2), 50 years females (overweight group), and 50 years females (obesity level2). There was no significant difference in compliance between deep sleep group and poor sleep group. In deep sleep group, females showed higher compliance. In poor sleep group, males showed higher compliance. The average duration of Fitbit usage among participants was 20.1 days. The compliant group wore the device for an average of 21.3 days, while the non-compliant group wore it for only 5.2 days. Of the compliant group, 86.9% (73.8% of all participants) continued to wear the Fitbit after the recommended 14-day period, and 50.8% wore it for more than 20 days. Conclusions : This study showed the possibility of adaptation for wearing a Fitbit for collecting objective sleep information. It is judged that the compliance is high because it was worn for more than 13.2 days out of the 14 days required. It is considered meaningful because the compliance was measured based on the sleep information by Fitbit, not the questionnaire. As the data on objective sleep time is collected automatically, we believe that the burden on participants after the study period is not significant for a certain period. Compliance may be even higher for cohorts related to illnesses and with doctor's orders, rather than for the general population.

• 한국안전학회지
• /
• 제33권5호
• /
• pp.21-27
• /
• 2018

The purpose of this study is to develop a SOP (Standard Operating Procedure) for a distribution board that can monitor the leakage current of a load distribution line in real time. The developed distribution board was fabricated by applying IEC 61439-1. It consists of the distribution board and an alarm device. The work process for making the distribution board was compliant with the KEMC (Korea Electrical Manufacturers Cooperative) regulations. And the AC distribution board range is 1,000 V. In addition, the voltage in DC is less than 1500 V. The distribution board receives a 3-phases and 4-wires power supply system and can supply power to the load of a maximum of 32 single or three phase distribution circuits. Also, leakage current measured on the power distribution board was used by sensors installed. The SOP of the developed distribution board consists of the installation standards for the short circuit alarm device and sensor, the surge protection device, switches and indication lamps, and other devices. The operation procedure was prepared so that each manufacturing step of the distribution board must be confirmed by the persons in charge of preparation, production, quality control and approval before moving forward to the next step.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.413-415
• /
• 2019

본 논문에서는 공유경제를 위한 IoT 기반의 휴먼 인터랙티브 광고 서비스(IoT-HiAS, IoT-Human Interactive Advertising Service)를 구현한다. HiAS 디바이스가 웹캠을 통해 디바이스의 전방을 촬영하고 MobileNet을 사용한 SSD 모델을 통해 사람을 실시간으로 검출한다. 검출된 사람을 카운팅하여 설정한 기준 이상의 사람 수가 검출되면 빔 프로젝터를 통해 유휴자원에 광고를 재생한다. 광고가 재생됨과 동시에 디바이스 전방의 광고 시작 시점을 캡쳐한 이미지와 검출된 사람의 수를 IoT 클라이언트를 통해 HiAS 서버의 oneM2M 표준을 준용한 IoT 서버로 전송한다. 광고가 끝나면 디바이스 전방을 촬영하여 이미지를 IoT 서버로 전송한다. 전송받은 데이터를 HiAS 서버의 소셜 네트워크 서비스(SNS, Social Network Service) 에이전트를 통해 광고주 및 광고제작자에게 알림 메시지를 전송하여 IoT 기반의 휴먼 인터랙티브 광고 서비스를 구현하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권3호
• /
• pp.293-296
• /
• 2012

SOC test methodology in ultra deep submicron (UDSM) technology with reasonable test time and cost has begun to satisfy high quality and reliability of the product. A novel hierarchical test architecture using IEEE standard 1149.1, 1149.7 and 1500 compliant facilities is proposed for the purpose of supporting flexible test environment to ensure SOC test methodology. Each embedded core in a system-on- a-chip (SOC) is controlled by test access ports (TAP) and TAP controller of IEEE standard 1149.1 as well as tested using IEEE standard 1500. An SOC device including TAPed cores is hierarchically organized by IEEE standard 1149.7 in wafer and chip level. As a result, it is possible to select/deselect all cores embedded in an SOC flexibly and reduce test cost dramatically using star scan topology.

• 한국군사과학기술학회지
• /
• 제17권1호
• /
• pp.142-148
• /
• 2014

The mirror which is considered in designing a MFD is off-axis primary one and its dimension is wide 556mm height 345mm. The MFD(Mirror Fixation Device) load specification is generated for the high resolution mirror. The optical WFEs for unit loads are calculated from mirror sensitivity analysis and they are compared with allocated allowable optical WFE. The parasite load for the MFD is calculated from their comparison. The MFD compliant with the parasite load is designed.

• Advances in robotics research
• /
• 제1권1호
• /
• pp.1-19
• /
• 2014

Microgripper is an essential device in the micro-operation system. It can convert other types of energy into mechanical energy and produce clamp movement with required chucking force, which enables it a broad application prospect in the domain of tiny components' processing and assembly, biomedicine and optics, etc. The performance of a microgripper is dependent on its power supply, type of drive, mechanism structure, sensing components, and controller. This paper presents a state-of-the-art survey of recent development on flexure-based microgrippers. According to the drive type, the existing microgrippers can be mainly classified as electrostatic microgripper, electrothermal microgripper, electromagnetic microgripper, piezoelectric microgripper, and shape memory alloy microgripper. Additionally, some different mechanisms, sensors, and control methods that are used in microgripper system are reviewed. The key issue of how to choose those components in microgripper system design is also addressed.

• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.355-358
• /
• 2008

In the current GPON market and standard, the line bit rate requirement is changing from 1.25 Gbps to 2.5 Gbps. We fabricate a 2.5 Gbps burst-mode receiver with commercially available blocks and optimize it with an APD bias control. A burst-mode measurement setup is made for the full compliance test with the GPON standard. The device meets the partially defined 2.5 Gbps specs in the current ITU G.984.2 standard, also, supports 1.25 Gbps specs for the coexistence issue in an access network. The full-compliant measurement values can be used as a guideline for fixing "for further study" specs in the current GPON standard at 2.5 Gbps.

• 대한기계학회논문집A
• /
• 제39권12호
• /
• pp.1287-1295
• /
• 2015

최근 산업 자동화 분야에서는 고속 통신을 지원하면서도 여러 장치로 구성된 시스템을 통합하고 관리하는 데 유리한 필드버스 방식의 통신 기술이 널리 활되는 추세이다. 운동하는 물체의 위치를 감지할 뿐만 아니라, 외부 제어기가 통신을 통해 다수의 엔코더에 대해 동시에 설정을 변경하거나 위치와 관련된 다양한 정보를 요청하는 환경에서 동작하는 스마트 엔코더의 경우에는 필드버스 지원이 필수적인 기능으로 인식된다. 본 논문에서는 CAN 네트워크 기반의 상위 응용 계층을 정의하는 CANopen 표준 중 엔코더의 장치 프로파일인 CiA 406 표준을 지원하기 위해 오픈 소스 CANopen 프레임워크인 CanFestival 을 확장, 구현하였다. 구현된 CiA 406 모듈의 동작은 CANopen 마스터 장치와 CiA 406 모듈을 적한 가상 CANopen 엔코더와의 실험을 통해 검증하였다.

• 한국전자통신학회논문지
• /
• 제14권2호
• /
• pp.417-424
• /
• 2019

AR/VR 디바이스에서 무손실 이미지 압축을 위한 JPEG-LS(: LosSless) 코덱에서 SBT 기반 프레임 압축기술로 메모리와 지연을 줄이는 설계를 제안하였다. 제안된 JPEG 무손실 코덱은 주로 콘텍스트 모형화 및 업데이트, 픽셀과 오류 예측 그리고 메모리 블록으로 구성된다. 모든 블록은 실시간 영상처리를 위해 파이프라인 구조를 가지며, LOCO-I 압축 알고리즘에 SBT 코딩기반의 개선된 2차원 접근방식을 사용한다. 제시한 STB-FLC기법을 통해 Block-RAM 사이즈를 기존 유사연구보다 1/3로 줄이고 예측(prediction) 블록의 병렬 설계는 처리속도에 향상을 가져올 수 있었다.

• 한국멀티미디어학회논문지
• /
• 제15권12호
• /
• pp.1464-1474
• /
• 2012

In this paper, we propose a QoS (Quality of Service)-aware and cooperative resource reservation scheme using cross-layer link adaptation for wireless high definition video transmission through UWB (Ultra Wide Band) network with D-MAC (Distributed Medium Access Control). A wireless high definition video transmission system usually requires stable high throughput even without line-of-sight, e.g., a destination device in another room separated by a wall. Since the WiMedia D-MAC supporting DRP (Distributed Reservation Protocol) scheme causes lots of DRP resource reservation conflicts due to failure of beacon detection in wireless channel environment, overall performances of the WiMedia D-MAC can be deteriorated. And the current WiMedia MAC standard has not considered QoS provisioning even though QoS parameters such as a range of service rates are provided to each traffic stream. Therefore, we propose Relay DRP protocol with QoS-based relay node selection criterion, which makes a relay path to avoid DRP resource reservation conflicts and guarantee QoS more stably through cross-layer link adaptation of cooperative relay transmission scheme and is compliant with the current WiMedia D-MAC protocol. Simulation results demonstrate performance improvements of the proposed method for throughput and QoS provisioning.