• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.281-285
• /
• 2000

This paper proposes context-based coding methods for variable length coding of inter-frame DCT coefficients. The proposed methods classify run-level symbols depending on the preceding coefficients. No extra overhead needs to be transmitted, since the information of the previously transmitted coefficients is used for classification. Two entropy coding methods, arithmetic coding and Huffman coding, are used for the proposed context-based coding. For Huffman coding, there is no complexity increase from the current standards by using the existing inter/intra VLC tables. Experimental results show that the proposed methods give ～ 19% bits gain and ～ 0.8 dB PSNR improvement for adaptive inter/intra VLC table selection, and ～ 37% bits gain and ～ 2.7dB PSNR improvement for arithmetic coding over the current standards, MPEG-4 and H.263. Also, the proposed methods obtain larger gain for small quantizaton parameters and the sequences with fast and complex motion. Therefore, for high quality video coding, the proposed methods have more advantage.

• Journal of information and communication convergence engineering
• /
• 제16권2호
• /
• pp.106-113
• /
• 2018

Although deep learning methods of convolutional neural networks (CNNs) and long-/short-term memory (LSTM) are widely used for text categorization, they still have certain shortcomings. CNNs require that the text retain some order, that the pooling lengths be identical, and that collateral analysis is impossible; In case of LSTM, it requires the unidirectional operation and the inputs/outputs are very complex. Against these problems, we thus improved these traditional deep learning methods in the following ways: We created collateral CNNs accepting disorder and variable-length pooling, and we removed the input/output gates when creating bidirectional LSTMs. We have used four benchmark datasets for topic and sentiment classification using the new methods that we propose. The best results were obtained by combining LTSM regional embeddings with data convolution. Our method is better than all previous methods (including deep learning methods) in terms of topic and sentiment classification.

• 한국기계가공학회지
• /
• 제21권8호
• /
• pp.66-71
• /
• 2022

Metal additive manufacturing (AM) has revolutionized several manufacturing industries. AM can generate large-scale metal components and produce complex geometries close to net-shapes. WAAM is an AM technology that has garnered considerable interest among industries owing to its economics and relatively high deposition rates. However, the heat accumulation in the weld bead during deposition triggers distortion and residual stress. To address these problems, various methods of interpass pressure rolling systems have been suggested in recent research. In addition, combining the rolling and WAAM processes can mitigate residual stresses. The constant-pressure rolling of the interlayer also affect the microstructure. The coarse microstructure of the as-deposited sample was altered to finer equiaxed grains via these methods. However, the bead-shape accuracy of the interlayer constant-pressure method does not consider the heat accumulation in each layer. Therefore, this study develops an interpass variable pressure rolling system that considers the heat accumulation of each layer. The interpass variable pressure rolling system comprises deposition, detection, pressure, and transport units. Finally, verification tests are performed on the interpass variable-pressure rolling system (at 500 kg) with the WAAM process, and the obtained results are discussed.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권4호
• /
• pp.72-77
• /
• 2002

The load interaction effect can be best illustrated by the phenomenon of overload retardation. Some prediction methods for retardation are reviewed and the problems discussed in the present paper. The so-called under-load effect much of the retardation disappears if a very low level minimum stress follows the overload, is also of importance for a prediction model to work properly under random load spectrum. The concept of Interactive Zone (IZ) fully considering reversed plasticity during unloading was discussed. This IZ concept can be combined with existing models to derive some improved models that can naturally take account of the under-load effect. Some simulations by IZ improved models for test under complex load sequences including multiple overloads and both over/under loads are compared with test results. It is seen that the improvement by IZ concept greatly enhanced the ability of existing models to accommodate complex load interaction effects.

• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.1022-1028
• /
• 1997

The reaction between Ni(Ⅱ) and sodium salt of 5,6-dihydro-1,4-dithiin-2,3-dithiolate (DDDT2-) in the presence of oxygen results in the formation of Ni(Ⅲ) species, Ni(DDDT)2-, which is isolated as tetraalkylammonium salt. The same reaction performed in the absence of oxygen yields dianionic Ni(Ⅱ) species, Ni(DDDT)22-, which is also isolated as the tetraethylammonium salt. The bis(5,6-dihydro-1,4-dithiin-2,3-dithiolato) nickelate (Ⅱ) dianion, Ni(DDDT)22-, reacts with methyl iodide to yield unusually stable bis(methylthio)dithiolene complex, Ni(CH3)2C8H8S8. All the isolated dithiolato-nickel(Ⅱ) and nickel(Ⅲ) complexes are characterized by 1H NMR, UV/Vis, IR and mass spectroscopic methods. The internal redox reaction of the nickel(Ⅱ)-dithiolate has been studied by spectro-electrochemical method and the results were compared with those of other metal-dithiolenes. The alkylated nickel(dithiolene) complex presumably undergoes cis-trans isomerization reaction in solution, judging from the experimental results of variable-temperature 1H NMR measurements.

• 응용통계연구
• /
• 제35권6호
• /
• pp.703-724
• /
• 2022

다변량 경시적 자료 분석은 반복 측정된 자료에 존재하는 상관관계를 올바르게 추정하면서 자료를 분석해야 한다. 경시적 연구에서는 다변량 경시적 자료가 주로 생성되지만, 기존 통계적 모형은 대부분 단변량으로 분석되어 다변량 경시적 자료에 존재하는 복잡한 상관관계를 제대로 설명하지 못하게 된다. 따라서 본 논문에서는 복잡한 상관관계를 설명하기 위해 공분산 행렬을 모형화하는 다양한 방법에 대해 고찰한다. 그 중 수정된 콜레스키 분해, 수정된 콜레스키 블록분해와 초구분해를 살펴본다. 그리고 일반화 자기회귀모수 행렬이 가지는 희박성 문제를 해결하기 위해 베이지안 방법을 이용하여 청소년 패널 데이터를 분석한다. 청소년 패널 데이터는 다변량 경시적 자료이며, 반응 변수로는 학교 적응도, 학업 성취도, 휴대전화 의존도를 고려한다. 자기 상관 구조와 혁신 표준 편차 구조를 달리 가정하여 여러 모형을 비교한다. 가장 적합한 모형에 대해 학교 적응도와 학업 성취도에 대해 모든 설명 변수가 유의미하며, 휴대전화 의존도가 반응 변수일 때 사교육 시간을 제외한 모든 설명 변수가 유의미한 것으로 나타난다.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.504-518
• /
• 1998

Degree-Of-Freedom(DOF) for most power transmission system varies according to the operation status which consists of friction elements to change the power flow or to adjust the speed ratio such as clutches, brakes or one-way clutches. To simulate the dynamic characteristics of automatic power transmission system which is a typical example of such a variable DOF systems, many sets of governing equations and complicated phase decision routines are necessary. In this paper dynamic constraint theorem is derived explaining the torque transmission characteristics during the clutch engagement process and a robust stable algorithm is developed describing this phase transition phenomenon effectively by introducing the concept of direct torque and virtual damping. Finally, applying this algorithm to a passenger car automatic transmission gear consisting of several friction elements, an efficient simulation methods for such a complex system will be suggested that is very simple and systematic.

• Genomics & Informatics
• /
• 제14권4호
• /
• pp.149-159
• /
• 2016

With the success of the genome-wide association studies (GWASs), many candidate loci for complex human diseases have been reported in the GWAS catalog. Recently, many disease prediction models based on penalized regression or statistical learning methods were proposed using candidate causal variants from significant single-nucleotide polymorphisms of GWASs. However, there have been only a few systematic studies comparing existing methods. In this study, we first constructed risk prediction models, such as stepwise linear regression (SLR), least absolute shrinkage and selection operator (LASSO), and Elastic-Net (EN), using a GWAS chip and GWAS catalog. We then compared the prediction accuracy by calculating the mean square error (MSE) value on data from the Korea Association Resource (KARE) with body mass index. Our results show that SLR provides a smaller MSE value than the other methods, while the numbers of selected variables in each model were similar.

• 한국재난정보학회:학술대회논문집
• /
• 한국재난정보학회 2022년 정기학술대회 논문집
• /
• pp.169-170
• /
• 2022

As the size of construction projects has become larger in recent years, the nature of the disaster safety factors along with the progress of construction is also becoming more complex and diversified. Accordingly, the introduction of computerized construction, new technologies, and new construction methods has resulted in a variety of risk factors in the process and operations, and many new safety construction methods are being tried. Since the construction industry has variable working environments and constantly changes working methods and components depending on the rate of progress, workers at construction sites are always exposed to risk depending on the specific circumstances of the construction industry. This study attempts to collect and analyze major accident cases generated by major accident construction projects as a result of progress in construction work, and to derive the major causes and causes for each safety management activity that affect safety accidents.

• 한국항행학회논문지
• /
• 제8권2호
• /
• pp.155-162
• /
• 2004

Recently, significant interest is shown to creation rather inexpensive global systems communications on base of Low-Earth-Orbit Satellite Networks (LEOSN). One of problems of design and creation LEOSN is development of the stream control methods and estimation it's efficiency in such networks. The given problem is complicated, that the topology of the satellite networks varies in time. It essentially hinders the analytical decision of the given problem. An effective way of overcoming of these difficulties is simulation modeling. For realization of research experiments on learning the information streams routing algorithms in LEOSN a special program complex SANET was developed. In the given paper principles of development of LEOSN simulation models and architecture of the manager by the process of a simulation modeling of the unit are considered. Methods of promotion of modeling time and architecture of a simulator complex offered in the article allow to boost essentially efficiency of simulation analysis and to ensure simulation modeling of the satellite networks consisting of several hundreds space vehicles.