• Bulletin of the Korean Chemical Society
• /
• 제17권4호
• /
• pp.342-347
• /
• 1996

Voltammetric determination of phenol derivatives, such as phenol, o-, m-, and p-cresols was studied with a β-Cyclodextrin (β-CD) modified-carbon paste electrode composing of the graphite powder and Nujol oil. Phenol derivatives were chemically deposited via the complex formation with β-CD by immersing the CME into a sample solution. The resulting surfaces were characterized with cyclic and differential pulse voltammetry. Treating the CME with 1 M nitric acid for five sec after a measurement could regenerate the electrode surface. Linear sweep and differential pulse voltammograms were recorded for the above system to optimize the experimental parameters for analysing the phenol derivatives. In this case, the detection limit for phenols was 5.0×10-7M for 25 min of the deposition time with differential pulse voltammetry. The relative standard deviation was ±5.2% of 3.0×10-6M (four repetitions). The interference effect of the following organic compounds was also investigated; Bezoic acid, hippuric acid, o-, m-, and p-methylhippuric acid. Adding the organic compounds into the sample solution reduces the peak current of the phenols to about 25%.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.757-762
• /
• 2018

LDV(laser Doppler velocimetry) measurements were conducted on the exit region of the impeller passage and the gap between the impeller and turbine blades under 0.8 speed ratio. The 0.8 speed ratio has an impeller speed of 2000rpm and a turbine speed of 1600rpm. A periodic variation of the mass flow rate is present in many of the measurements made. The frequency of this variation is the same as the frequency of the turbine blades passing the impeller passage exit. It is found that the instantaneous position of the turbine had effect on fluid flow inside the impeller passage and gap region. This study would aid in the construction of higher accuracy CFD models of this complex turbomachinery device.

• 환경영향평가
• /
• 제20권4호
• /
• pp.497-507
• /
• 2011

This research studied human health risk assessment of benzene from industrial complexes of Chungcheong Province (Seosan industrial complex) and Jeonla Province (Iksan industrial complex and Yeosoo industrial complex). The residents near the industrial complexes areas can be often exposed to volatile organic compounds (e.g., benzene, toluene, xylenes) through a number of exposure pathways, including inhalation of the organic pollutant via various environmental matrices (air, water and soil), contaminated water, and soil intake. Benzene is well known to be a common carcinogenic and toxic compound that is produced from industrial and oil refinery complexes. In this study, a number of samples from water, air, and soil were taken from the residential settings and public school zones located near the industrial complex sites. Based on the carcinogenic risk assessment, the risk estimates were slightly above $10{\times}10^{-6}$ at all three industrial sites. According to deterministic risk assessment, inhalation was the most important route. The distribution of benzene in the environment would be dependent on vapor pressure, and the physical property influencing the extent of the potential risks. Non-carcinogenic risk assessment of benzene shows that the values of Hazard Index(HI) were much lower than 1.0 at all industrial complexes. Therefore, benzene was not a cause of concern in terms of non-carcinogenic risk posed to the residents near the sites. When compared to probabilistic risk assessment, the CTE(central tendency exposure) cancer risk values of deterministic risk assessment were close to the mean values predicted by the probabilistic risk assessment. The RME(reasonable maximum exposure) values fell within the range of 95% to 99.9% estimated by the probabilistic risk assessment. Since the values of carcinogenic risk assessment were higher than $10{\times}10^{-6}$, further detailed monitoring and refined risk assessment for benzene may be warranted to estimate more reliable and potential inhalation risks to receptors near the industrial complexes.

• 한국식품영양과학회지
• /
• 제43권3호
• /
• pp.425-430
• /
• 2014

식품의 3대 영양소인 탄수화물, 단백질 및 지방의 일반적인 분석 방법은 Kjeldahl 및 Soxhlet 시험법과 같은 기존의 화학 분석 방법으로 분석하였다. 그러나 이러한 분석 방법은 시료의 전처리 과정이 필요하고 많은 비용과 분석 시간이 소모되며 복잡한 추출과정을 거친다는 단점이 있다. 따라서 본 연구에서는 국내 유통 식품 및 농산물 자원에 함유된 탄수화물, 단백질 및 지방의 함량을 근적외 분광분석법(near-infrared reflectance spectroscopy, NIRS)으로 신속하고 정확하게 동시에 측정할 수 있는 방법을 검토하였다. 분석시료는 517종의 다양한 식품 시료를 예측모델 개발용(calibration set) 412종과 예견치 분석용(validation set) 162종으로 구분하여 사용하였다. 기존의 화학 분석 방법에 의해 측정된 성분들의 분석 결과와 근적외 스펙트럼 데이터간의 상관관계를 조사하여 각 성분별 예측모델을 검토하였으며, 변형부분최소자승법(MPLS) 및 다양한 수처리와 산란보정을 이용한 결과, 탄수화물, 단백질 및 지방의 산란방식은 각각 weighted MSC, standard MSC 및 SNV only로 수처리는 각각 1차 미분(1st derivative, 4 nm gap, 5 points smoothing, 1 point second smoothing), 2차 미분(2, 5, 5, 3) 및 1차 미분(1, 1, 1, 1)을 적용하여 예측모델을 검토한 결과 $R^2$값이 0.971, 0.974 및 0.937로 높고 SEC값은 4.066, 1.080 및 1.890으로 낮은 최적의 예측모델을 개발하였다. 세 성분의 최적 예측모델에 의한 상관도와 잔차 히스토그램을 검토한 결과 세 성분 모두 근적외 분광분석법 예측모델로 적합함을 확인할 수 있었으며, 최적의 예측모델을 미지의 식품 시료 162종에 적용한 결과, 탄수화물, 단백질 및 지방의 $r^2$(SEP)값은 0.987(2.515), 0.970(1.144) 및 0.947(1.370)로 $r^2$값은 높으며 SEP값은 낮은 양호한 양상을 나타내었다. 그러나 지방의 결정계수($R^2$, $r^2$)값은 탄수화물, 단백질에 비해 다소 낮은 양상을 나타내므로 추후 식품 검체에 적용 시 탄수화물 및 단백질 성분에 비해 예측결과의 정확성이 다소 낮을 수 있다고 판단되어진다. 이상의 결과에서 전처리 단계에서 복잡한 추출과정, 많은 비용소모, 분석시간 및 고도의 분석기술을 요하는 기존 습식 화학분석 방법의 단점을 보완하고자 검토되었던 근적외 분광분석법은 다량의 식품분석 시료를 분석하기에는 매우 효율적이라고 생각되며, 이런 점들을 고려해 보면 근적외 분광분석 예측모델들은 추후에 미지 식품시료에 함유된 탄수화물, 단백질 및 지방의 기존 분석법을 대체하여 편리하고 빠르게 함량을 예측 가능할 것으로 판단된다.

• 청정기술
• /
• 제26권1호
• /
• pp.1-6
• /
• 2020

초임계 용액 급속팽창법(rapid expansion of supercritical solution, RESS)으로 몰시도민(molsidomine, MOL) 약물이 로딩 된 퍼아세틸-β-사이클로덱스트린(PAc-β-CD) 나노 입자를 제조하였다. 입자는 초임계 용액을 공기 중으로 급속하게 팽창시켜 제조하였다. MOL과 PAc-β-CD (0.5, 1 wt%)의 농도, 추출 온도(45 ~ 60 ℃), 모세관 노즐의 길이(5 ~ 20 mm) 및 내경(Inner diameter, ID) (50 ~ 150 μm), 그리고 분사 거리의 변화에 따라 형성된 입자의 크기와 모폴로지를 조사하였다. MOL과 PAc-β-CD의 상호작용을 ¹H-NMR 분광법으로 확인하였고, 입자 크기는 주사 전자 현미경으로 측정하였다. 온도를 45 ℃에서 60 ℃로 올리거나 노즐 내경을 150 μm에서 50 μm로 줄이면 입자 평균 크기가 증가하였으며, 반면에 일정한 압력(34.5 MPa)과 온도(45 ℃)에서 분사 거리를 늘리면 입자 평균 크기가 감소하는 효과를 나타내었다. 0.5 wt%의 PAc-β-CD 농도로서 초임계 공정을 진행한 결과, 모세관의 길이가 짧고(5 mm) 내경이 작은(50 μm) 조건에서 크기가 가장 작은(165 nm) 입자가 얻어졌다. 제조한 나노 입자는 오일 내에서 분산성과 용해도가 증가하였으며, 포접체 입자에서 MOL이 방출되는 시간이 지연되는 것을 확인하였다.

• 전기학회논문지P
• /
• 제60권3호
• /
• pp.114-119
• /
• 2011

Large Power transformer is a complex and critical component of power plant and consists of cellulosic paper, insulation oil, core, coil etc. Insulation materials of transformer and related equipment break down to liberate dissolved gas due to corona, partial discharge, pyrolysis or thermal decomposition. The dissolved gas kinds can be related to the type of electrical faults, and the rate of gas generation can indicate the severity of the fault. The identities of gases being generated are using very useful to decide the condition of transformation status. Therefore dissolved gas analysis is one of the best condition monitoring methods for power transformer. Also, on-line multi-gas analyzer has been developed and installed to monitor the condition of critical transformers. Rogers method, IEC method, key gas method and Duval Triangle method are used to failure diagnosis typically, and those methods are using the ratio or kinds of dissolved gas to evaluate the condition of transformer. This paper analyzes the reliability of transformer diagnostic methods considering actual dissolved gas concentration. Fault diagnosis is performed based on the dissolved gas of five transformers which experienced various fault respectively in the field, and the diagnosis result is compared with the actual off-line fault analysis. In this comparison result, Diagnostic methods using dissolved gas ratio like Rogers method, IEC method are sometimes fall outside the ratio code and no diagnosis but Duval triangle method and Key gas method is correct comparatively.

• 대한화장품학회지
• /
• 제25권4호
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and E and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then the on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to form a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5:1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin's moisture. Vitamins A and E contribute to preventing skin aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer. The crystalline structures of gel were surface-chemically-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC. Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Daegeon and Pusan in Korea and Hokkaido, Osaka and Miyazaki in Japan with correlation to the climate.

• 대한통합의학회지
• /
• 제7권4호
• /
• pp.223-230
• /
• 2019

Purpose : Wellness tourism is defined as travel for the purpose of promoting health and well-being through physical, psychological, or spiritual activities. The development and verification of a comprehensive wellness program for health care for workers is needed. The purpose of this study is to investigate the wellness and skin health effects of skin health programs in order to develop high-value health care services. Methods : The subjects were 15 middle-aged women who understood the research and volunteered and participated in the two-day skin health wellness program. Participants were measured to determine their wellness index and skin health twice: before and after participating in the program. Wellness index measures include comprehensive wellness, physical wellness, mental wellness, emotional wellness, social/cultural wellness, financial wellness, and environmental wellness. Skin health measurement items consisted of skin oil, skin water, skin pore, skin elasticity, skin wrinkle, and skin pigment. The skin wellness program included aerobic exercise, endurance exercise, functional food, cosmetics, herbal tea, massages, spa treatments, meditation, and marine leisure sports. The t-test analysis was used to compare the difference between wellness index and skin health measurement items before and after the program. Results : Among the wellness index items, the comprehensive wellness index (p<.05), mental wellness index (p<.05) and environmental wellness index (p<.05) showed statistically significant differences. Among skin health items, skin oil (p<.05), skin elasticity (p<.01) and skin wrinkle (p<.01) all showed statistically significant differences. There was no statistically significant difference in physical wellness, emotional wellness, social/cultural wellness, financial wellness, skin water, skin pore and skin pigment. Conclusion : This study confirmed that the two-day complex wellness program is an effective program for some items of wellness index and skin health.

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.41-46
• /
• 2018

This study proves the causes of cylinder and piston jam by scratches which is the fatal problem of hydraulic breaker through the thermal analysis and thermal-structural coupled field analysis. The trouble from the scratch is a complex problem which can be caused by manufacturing process (this is an internal factor) and the users mistake or contamination in the hydraulic circuit (these are an external factor). Hence, it's not easy to investigate the causes, also hard to prevent the recurrence. In this reason, hydraulic breaker manufacturers are trying to improve the manufacturing process such as machining, heat treatment, grinding, cleaning, also to prevent the contamination in hydraulic circuit and to remove the remains. It's being managed thoroughly by manufacturers. This study shows the effect of the temperature rise by the frictional heat generated when the piston hits the tool on the hydraulic oil while the hydraulic breaker is operating, also the temperature distribution when it starts to affect main components of hydraulic breaker. The stress and the amount of deformation also could be found through thermal-structural coupled field analysis. It proved that the stress and deformation are proportionally increased according to the temperature rise in hit area, and it affects the cylinder and the viscosity of hydraulic oil inside the cylinder when it heats up beyond the certain temperature.

• Corrosion Science and Technology
• /
• 제11권3호
• /
• pp.77-81
• /
• 2012

Cathodic protection(CP) is widely used as a means of protecting corrosion for not only marine structures like ship hulls and offshore drilling facilities, but also underground structures like buried pipelines and oil storage tanks. The principle of CP is that the anodic dissolution of metal can be protected by supplying electrons to the cathode metal. When unprotected structures are nearby to CP systems, interference problems between unprotected and protected structures may be happened. The stray current interference can accelerate the corrosion of nearby structures. So far many efforts have been made to reduce the interference in the electric railway systems adjacent to the underground metal structures like buried pipelines and gas/oil tanks. During recent few decades the protection technologies against stray current induced corrosion have been significantly improved and a number of techniques have been developed. However, there is very limited information an marine environments. Some complex harbor structures are protected by two cathodic protection systems, i.e. sacrificial anode cathodic protection(SACP) and impressed current cathodic protection(ICCP). In this case, when the protection current from sacrificial anodes returns to the cathode through electrolyte, it passes through nearby other low resistance metal structures. In many cases the stray current of ICCP systems influences the function of SACP. In this study, the risk of stray current from the SACP system to adjacent reinforced concrete structures has been verified through laboratory experiments. Concrete and steel pile structures modeled a part of bridge have been investigated in terms of CP potential and current between the two. The variation of stray current according to the magnitude of ICCP/SACP has been studied to mitigate it and to suggest the proper protection criteria.