• 한국CDE학회논문집
• /
• 제6권1호
• /
• pp.31-39
• /
• 2001

Presented in this paper are algorithms to compute the positions of vertices and equations of edges of the Voronoi diagram of a circle set. The circles are located in a Euclidean plane, the radii of the circles are not necessarily equal and the circles are not necessarily disjoint. The algorithms correctly and efficiently work when the correct topology of the Voronoi diagram was given. Given three circle generators, the position of the Voronoi vertex is computed by treating the plane as a complex plane, the Z-plane, and transforming it into another complex plane, the W-plane, via the Mobius transformation. Then, the problem is formulated as a simple point location problem in regions defined by two lines and two circles in the W-plane. And the center of the inverse-transformed circle in Z-plane from the line in the W-plane becomes the position of the Voronoi vertex. After the correct topology is constructed with the geometry of the vertices, the equations of edge are computed in a rational quadratic Bezier curve farm.

• Journal of Mechanical Science and Technology
• /
• 제19권9호
• /
• pp.1773-1780
• /
• 2005

The process of mould design in the foundry industry has been based on the intuition and experience of foundry engineers and designers. To bring the industry to a more scientific basis the design process should be integrated with scientific analysis such as heat transfer. The production by foundry techniques is influenced by the geometry configuration, which affects the solidification conditions and subsequent cooling. Numerical simulation and/or experiments make possible the selection of adequate materials, reducing cycle times and minimizing production costs. The main propose of this work is to study the heat transfer phenomena in the mould considering the phase change of the cast-part. Due to complex geometry of the mould, a block unstructured grid and a generalized curvilinear formulation engaged with the finite volume method is described and applied. Two types of boundary conditions, diffusive and Newtonian, are used and compared. The developed numerical code is tested in real case and the main results are compared with experimental data. The results showed that the solidification time is about 6 seconds for diffusive boundary conditions and 14.8 seconds for Newtonian boundary conditions. The use of the block unstructured grid in combination with a generalized curvilinear formulation works well with the finite volume method and allows the development of more efficient algorithms with better capacity to describe the part contours through a lesser number of elements.

• 한국지진공학회논문집
• /
• 제9권6호
• /
• pp.67-73
• /
• 2005

엄밀한 지반-구조물 상호작용 해석을 위해서는 지반에 대한 묘사가 적절히 이루어져야 한다. 그러나 물성이 불연속적이거나 지층의 모양이 복잡할 때에는 유한요소망을 구성하는 것이 어려운데, 그 이유는 유한요소망이 지층의 모양을 정확히 나타내어야하기 때문이다. 이러한 어려움을 극복하기 위하여 본 연구에서는 지층의 불연속선을 따라 요소를 재배열하지 않고 엄밀하게 수치적분이 가능한 방법을 채용하였다. 그 결과로 정렬된 요소망을 그대로 이용하게 되어 강성행렬의 성질이 좋아지며, 해석 또한 신뢰성이 높아지게 되었다. 이 해석 방법을 이용하여 지진응답에 미지는 지층의 영향을 조사하였으며, 결과적으로 복잡하고 불연속적인 물성을 가지는 지층으로 이루어진 지반과 구조물의 상호작용을 해석하는 데에 쉽게 이용 될 수 있음을 보였다.

• 한국실내디자인학회논문집
• /
• 제22호
• /
• pp.123-131
• /
• 2000

The purpose of this study is to propose a new design concept and properties within new paradigm. Contemporary students of architectural design seem to redefine the mechanic and reductive approach to design method based upon Euclidean geometry. In this study, the organic space-time and holistic view-point that constitutes the background for all this is radically different from the modern design. It consists of three sections as follow: First, it presents a concept of complex system and properties of complexity that we find in new natural science and tries to combine that news geometry with architectural design to provide a methodological basis for morphogenesis and transformation. Second, the complexity in architecture is defined as a fractal shape, folded space, and irreducible organic system that cannot be fully understood by modernist idea of architecture. Third, the complexity in architecture is strategy based on the electronic paradigm that would enable the emergence of creative possibility. The complexity theory offer new insights to explain not only natural laws but also define dynamic architecture. In fine, this study places a great emphasis on the organic world-view to the spatial organization, which I hope will contribute to generating a greater number of creative possibilities for design.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1996년도 춘계 학술대회논문집
• /
• pp.85-92
• /
• 1996

Numerical simulations are made for the three-dimensional flow around a wing in ground effect craft haying the complex geometry. A numerical tool is developed for the primary design of hull and wing shape of practical Wing-In-Ground effect(WIG) stop. The finite-difference method is utilized to descretize the governing equations and pressure field is obtained by using Marker-And-Cell(MAC) method. The air and water flows are simultaneously simulated in the time-marching solution procedure for the Navier-Stokes equation. The porosity technique and the density function are devised for the implementation of the three-dimensional body-boundary and the free-surface conditions, respectively. In this paper, a craft is modeled simply by three blocks containing a wing mounted on a main body horizontally, with the endplate. The numerical calculations of a WIG advancing in a calm water are performed and the WIG-generated wave profiles are also obtained. In the final paper, details of the numerical methods employed for the present study and calculated results are discussed.

• 대한기계학회논문집B
• /
• 제24권8호
• /
• pp.1046-1055
• /
• 2000

The flow and thermal phenomena in flat tubes of radiator are analyzed numerically. To predict the characteristics of heat transfer and pressure drop, the flow analysis program for three-dimensional complex geometry is developed, which adopted an non-staggered grid system and Cartesian velocities as dependent variables of the momentum equations. Using the developed program, the effect of tube specifications on the heat transfer characteristics is investigated for various flat tubes. From this study, the following results are obtained; (1) For the same hydraulic diameter($D_h{\doteq}5.2$mm), the Nusselt numbers of three basic modeis(D, J, and H-model) are 8.71, 8.92, and 10.58, respectively, and the pressure drops of D-, J-, and H-model are predicted as $-3.08{\times}10^{-2}\;Pa,\;-3.12{\times}10^{-2}\;Pa,\;and\; -3.98{\times}10^{-2}$ Pa, (2) In case of the same flat tube specification, the fins must be brazed at upper tube surface because the heat is more vividly transferred. Therefore, it is found that the H- model is the most effective tube as a heat exchanger and these results are used as a fundamental data for the design of tube.

• Composites Research
• /
• 제24권3호
• /
• pp.6-11
• /
• 2011

본 논문은 복잡한 형상으로 드레이핑 성행된 직물 복합재료 구조의 국부적 물성 변화 및 재료거동 예측을 위한 방법을 제시하였다. 제안된 방법을 적용하기 위해 대퇴골 골 간단 부 골절치료용 고정판을 대상으로 선정하였다. 드레이핑 공정 종 발생하는 재료의 거시적/미시적 변형에 의한 국부적 재료물성 변화를 다양한 실험을 통해 검증하고, 그 결과를 복잡한 형상을 가지는 고정판의 정적/피로 거동 예측에 활용하였다. 본 논문은 복잡한 형상을 가지는 복합재료 구조물의 설계 및 성능평가에 유용한 정보와 해석방법을 제시할 것으로 기대된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.343-344
• /
• 2006

Powder injection molding(PIM) is widely used for many parts in the field of automotives, electronics and medical industries, due to the capability of net shaping for complex 3-D geometry. Powder injection mold design fur the dental scaler tip, a component of medical appliance, was presented. In comparison with conventional machining process, powder injection molding has many advantages, specially in price and dimensional stability, for molding dental scaler tip which has complex geometry. Both product design and mold design for dental scaler tip were presented. The 'rapid mold' concept was applied to manufacture the various forms of dental scaler tip.

• 한국산림과학회지
• /
• 제87권4호
• /
• pp.528-534
• /
• 1998

산불 확산의 인자 중에 바람과 경사면은 가장 중요한 인자들로 고려된다. 일반적으로 복잡한 산악지형에서는 동일한 경사면이라도 서로 다른 분포의 바람을 갖는다. 본 논문에서는 지형데이타를 이용한 산림내 각 지역에서의 풍향 풍속의 유동장을 계산하여 산불확산을 예측하였으며 그 결과 값을 사용하여 ROS(Rate Of Spread)실험식이 적용된 산불 확산 알고리즘을 개발하였다. 이를 실제 산불확산에 적용하여 90%이상의 일치성을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.53-54
• /
• 2023

Because irregular shaped buildings are designed with various three-dimensional curves, the difficulty of design and construction is very high, and more construction drawings are needed to reduce construction errors. General 2D drawings may have limitations in conveying the information necessary for construction. By utilizing BIM, it is possible to three-dimensionally design parts that are not expressed on 2D drawings and additional structurall components required for the construction of the curved exterior finishing materials. This study examines the necessity of BIM at the construction stage, its performance through it, and how it can be linked to smart construction technology through construction BIM being applied to the new construction site of Sejong-Pocheon Line Cheoin Rest Area.