• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.356-360
• /
• 2002

Leaky modes on a circular dielectric rod are investigated from the precisely determined normalized complex propagation constants using Davidenko's complex root finding technique. Below the cutoff frequency of the guided mode, distinct frequency regions that have unique properties are observed, such as nonphysical region, antenna mode region, reactive mode region, and spectral gap region. The effects of tro design parameters, dielectric constants and the radius of the rod, to the leaky mode characteristics are also considered.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.268-272
• /
• 2014

This letter presents a measurement methodology of the complex permittivity of liquid using a partially open cavity in narrow band. The partially open cavity (POC) can measure dielectric small changes caused by the temperature variation of the liquid inside the cavity as well. Using the resonance frequency and unloaded quality factor of the proposed POC, the complex permittivity is evaluated. The apertures on the walls of the cavity are designed to circulate the liquid inside to outside of the POC and located at the corner area of the cavity to minimize the disturbance of field distribution at the dominant mode. The results measured by the proposed POC were compared with those by the conventional open-ended probe and Cole-Cole equation. The POC showed better performance in measuring small dielectric constant changes than the open-ended probe.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.1038-1042
• /
• 2005

We have investigated dielectric properties depending on bias voltage in organic light-emitting diodes using 8-hydroxyquinoline aluminum $(Alq_3)$ as an electron transport and emissive material. We analyzed the dielectric properties of organic light-emitting diodes using impedance of characteristics. Impedance characteristics was measured complex impedance Z and phase $\theta$ in the frequency range of 40 Hz to $10^8$ Hz. We obtained complex electrical conductivity, dielectric constant, and loss tangent $(tan\delta)$ of the device at room temperature. From these analyses, we are able to interpret a conduction mechanism and dielectric properties contributed by an interfacial and orientational polarization.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.1012-1220
• /
• 1994

BaTiO3 ceramics doped with 0.1 to 4.0 mol% Nb2O5 were prepared by conventional solid stage sintering process, so as to investigate the effect of the amount of Nb2O5 on the dielectric properties and complex impedance patterns of barium titanates. From the measurement of capacitance, we found that the dielectric constant of BaTiO3 samples with 1 mol% or more Nb2O5 remained approximately constant around room temperature with values higher than 2500. In this paper, the effect of impurity content as well as temperature on complex impedance patterns was discussed in detail. In particular, the grain and grain boundary behavior of samples which showed PTCR characteristics was discussed in terms of measuring temperature.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권7호
• /
• pp.305-310
• /
• 2002

The microwave dielectric properties of Ba(Mg$_{1}$3/Ta$_{2}$3/O$_3$-Ba(Co$_{1}$3/Nb$_{2}$3/O$_3$[BMT-BCN] ceramics were investigated. The specimens were prepared by the conventional mixed oxide method with the sintering temperature of 15$25^{\circ}C$~1575$^{\circ}C$. It was found that Ba(Mg$_{1}$3/Ta$_{2}$3/O$_3$[BMT] and BCN formed a solid solution with complex perovskite structure. As increasing the mole fraction of BCN, dielectric constant increased while the temperature coefficient of resonant frequency was changed from positive to negative value. The highest value of quality factor, Q$\times$f$_{0}$=138,205GHz, obtained in the 0.9BMT-0.1BCN ceramics sintered at 1575$^{\circ}C$. In the range of x$\geq$0.4, the dielectric constant was about 30. The 0.55BMT-0.45BCN ceramics sintered at 15$25^{\circ}C$ for 5 hours showed the microwave dielectric properties of $\varepsilon$$_{r}$=30.21, Q$\times$f$_{0}$=85,789GHz and $\tau$$_{f}$=2.9015ppm/$^{\circ}C$.EX>.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권8호
• /
• pp.411-416
• /
• 2006

A new method on the evaluation of insulation oil was proposed. Terahertz time-domain spectroscopy (THz-TDS) was applied to investigate the properties of the insulating oil. For the diagnostics of oil degradation, three kinds of oils have been analyzed by THz-TDS. The degraded oil showed different optical and electrical constants compared with a new one. Generally, the power absorption coefficient, the refractive index, the dielectric constant and loss $tan{\delta}$ of the oil increase as the aging of insulating oil proceed. And the characteristics of two kind of insulation oil, 1-4 and 7-4, was compared in terahertz spectral region. Difference in refractive index and complex dielectric constant has been observed between the samples. The results of this study suggest that THz-TDS is a promising new means for evaluating degradation and identification of insulating oil.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권4호
• /
• pp.232-240
• /
• 1999

In this study, the $(1-\chi)Ba(Mg_{\fraction one-third}Ta_{\fraction two-thirds}O_3-\chiBa(Co_{\fraction one-third}\Nb_{\fraction two-thirds})O_3$ ceramics($\chi$=0.3,0.4,0.5,0.6) were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of $1500~1575^{\circ}C$ for5 hours in air. The BMT-BCN ceramics have a complex perovskite structure, and have peaks of (101), (102), (201), (202) and (212). Increasing the sintering temperature, dielectric constant was increased. Temperature coefficients of resonant frequency of the specimens were decreasing with increasing BCN content. In the case of the 0.7BMT-0.3BCN ceramics sintered at $1575^{\circ}C$ for 5 hours, dielectric constant, quality factor and temperature coefficient of resonant frequency for microwave dielectrics application were a good value of 28, 235500 at ㎓ and -$1.2 ppm/^{\circ}C$, respectively.

• 폴리머
• /
• 제25권1호
• /
• pp.98-107
• /
• 2001

팬텀 모델 제작을 위해 도전체로서 전도성 카본블랙을, 유전체로서 (Ba, Ca)$(Sn, Ti)O_3$ 와 $SrTiO_3$를 적용한 SBS 복합재료의 유전 특성과 형상 회복 특성을 조사하였다. 카본블랙만을 첨가한 복합재료는 카본블랙 함량이 증가함에 따라 복소유전율과 도전율이 증가하였으며, 주파수가 증가함에 따라 유전율이 감소하고 도전율은 증가하는 주파수 의존 특성을 보였다. 카본블랙과 유전체를 동시에 적용한 3상 복합재료는 동일한 카본블랙 함량에 대해서 유전체의 함량이 증가할수록 복소유전율과 도전율이 증가하는 특성을 나타냈으며, 카본블랙의 영향으로 주파수가 증가함에 따라 유전율이 감소하였고 도전율은 증가하였다. 유전체/SBS 복합재료의 유전성질과 도전체/SBS 복합재료의 주파수 의존도를 조절하여 현재 이동전화 사용 주파수 대역인 775 MHz~2 GHz 범위에서 인체의 뇌와 두개골 조직의 유전율, 도전율과 상응하는 비흡수율 측정용 팬텀 모델 재료를 제작할 수 있었다. 열기계적 반복시험에서는 충전재의 함량이 증가함에 따라 잔류변형량이 증가하였으나, 인체 조직을 모사한 SBS 복합재료는 우수한 형상 회복 성능을 보였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권3호
• /
• pp.110-114
• /
• 2001

$0.7Ba(Mg{\frac}_{1}{3}Ta{\frac}_{1}{3})O_3-0.3Ba({\frac}_{1}{3}Nb{\frac}_{1}{3})O_3ceramics$ were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of $1500{\sim}1575[^{\circ}C]$ for 5 hours in air. The microwave dielectric properties of the specimens were investigated with sintering temperature. The 0.7BMT-0.3BCN ceramics showed typical XRD patterns of the complex perovskite structure. Dielectric constant and quality factor were increased with increasing the sintering temperature. In the case of the specimens sintered at $1575[^{\circ}C]$ for 5 hours, dielectric constant, quality factor and temperature coefficient of resonant frequency were good values of 28,23545 at 10[㎓] and -1.2 $[ppm/^{\circ}C]$, respectively.

• 한국전자파학회논문지
• /
• 제14권1호
• /
• pp.1-7
• /
• 2003

Davidenko 방법으로 정확하게 구하여진 정규화 복소 전파 상수로부터 원형 유전체 봉의 누설 모드를 조사하였다. 도파 모드의 차단 주파수 아래에서 nonphysical 영역, 안테나 모드 영역, Reactive 모드 영역, spectral gap영역 등의 독특한 주파수 영역이 관찰되었다.