• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.744-752
• /
• 2003

A level set method is combined with the volume-of-fluid method so that the coupled method can not only calculate an interfacial curvature accurately but also can achieve mass conservation well. The coupled level set and volume-of-fluid(CLSVOF) method is efficiently implemented by employing an interface reconstruction algorithm which is based on the explicit relationship between the interface configuration and the fluid volume function. The CLSVOF method is applied for numerical simulation of droplet impact on solid surfaces with variable contact angles. The numerical results are found to preserve mass conservation and to be in good agreement with the data reported in the literature. Also, the present method proved to be applicable to the complex phenomena such as breakup and rebound of a droplet.

• Structural Engineering and Mechanics
• /
• 제9권1호
• /
• pp.37-50
• /
• 2000

Very few studies on orthotropic circular disks or rings under diametrical loadings are conducted because of difficulties in treatment. This paper shows analytical solutions and gives the distributions of stresses and displacements by using Lekhnitskii's complex variable method. Several numerical results are shown by graphical representation.

• Journal of applied mathematics & informatics
• /
• 제16권1_2호
• /
• pp.323-336
• /
• 2004

We consider the application of complex variable method to elastic problem and investigate the nonlinear effect of finite torsion of a compressible elastic composite layer. We obtain that as a result of finite deformation approach, a tube subjected to torsion decreases in radius giving rise to a “hold effect”.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.85-91
• /
• 2021

With the social atmosphere of respect for human life and the increasing interest in safety of field workers, research and development is underway in various ways to transform direct live method into indirect live method in the field of distribution. As part of this measure, it was necessary to convert electric pole and complex facilities work from machining power distribution to indirect live operation, and install a straight connecting sleeve that connects cut wires for by-pass method, but it failed to meet the tensile strength standard when constructing a sleeve constructed by direct method. In this paper, the design factors were derived based on the case of overseas similar sleeves and the tensile strength evaluation of each variable was performed, based on the analysis of these test results, the method for securing tensile strength of straight-line access sleeves for indirect running was presented.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.58-69
• /
• 2016

This paper describes the design and implementation of a new diode clamped multilevel inverter for variable frequency drive. The diode clamp multilevel inverter has been widely used for low power, high voltage applications due to its superior performance. However, it has some limitations such as increased number of switching devices and complex PWM control. In this paper, a new topology is proposed. New topology requires only (N-1) switching devices and (N-3) clamping diodes compared to existing topology. A modified APO-PWM control method is used to generate gate pulses for inverter. The proposed inverter topology is coupled with single phase induction motor and its performance is tested by MATLAB simulation. Finally, a prototype model has built and its performance is tested with single phase variable frequency drive.

• 대한전자공학회논문지SP
• /
• 제43권5호
• /
• pp.52-61
• /
• 2006

영상 및 신호 처리 분야에 일반적으로 사용되는 직교 웨이블릿 변환은 천이에 대한 민감성과 방향성에 대한 선택도가 떨어지기 때문에 성능에 한계를 가지고 있다. 이러한 단점을 극복하기 위해 복소수 웨이블릿 변환이 사용되고 있다. 본 논문에서는 이중 트리 복소수 웨이블릿과 베르누이-가우스 사전 확률분포를 이용한 효과적인 영상 잡음 제거 방법을 제안하고자 한다. 베르누이-가우스 모델에 대한 파라미터를 추정하기 위해 본 논문에서는 두 가지의 간단하고 반복적이지 않은 방법을 제안한다. 베르누이 랜덤 변수로 표현되는 혼합 파라미터를 추정하기 위해서는 가설-검증 기법을 사용한다. 추정된 혼합 파라미터를 이용하여 신호의 분산은 MGML(maximum generalized marginal likelihood) 추정기를 통하여 추정된다. 복소수 웨이블릿 변환을 사용하여 제안 방법과 알려진 잡음 제거 기법과 비교 실험을 수행하였다. 실험결과를 통해 제안 방법이 적은 계산량으로 고주파 성분이 많은 영상에 대하여 우수한 잡음 제거 결과를 나타냄을 알 수 있다.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.988-1000
• /
• 1999

An experimental study is presented for the effect of number of terms of a pewee series type stress function on stress analysis around a hole in tensile loaded plate. The hybrid method coupling photoelastsic data inputs and complex variable formulations involving conformal mappings and analytical continuity is used to calculate tangential stress on the boundary of the hole in uniaxially loaded, finite width tensile plate. In order to measure isochromatic data accurately, actual photoelastic fringe patterns are two times multiplied and sharpened by digital image processing. For qualitative comparison, actual fringes are compared with calculated ones. For quantitative comparison, percentage errors and standard deviations with respect to percentage errors are caculated for all measured points by changing the number of terms of stress function. The experimental results indicate that stress concentration factors analyzed by the hybrid method are accurate within three percent compared with ones obtained by theoretical and finite element analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.501-503
• /
• 1999

In this paper, the design method of a hybrid fuzzy controller with an optimal auto-tuning method is proposed. The conventional PID controller becomes so sensitive to the control environments and the change of parameters that the efficiency of its utility for the complex and nonlinear plant has been questioned in transient state. In this paper, first, a hybrid fuzzy logic controller(HFLC) is proposed. The control input of the system in the HFLC is a convex combination by a fuzzy variable of the FLC's output in transient state and the PID's output in steady state. Second, a powerful auto-tuning algorithm is presented to automatically improve the Performance of controller, utilizing the improved complex method and the genetic algorithm. The algorithm estimates automatically the optimal values of scaling factors and PID coefficients. Controllers are applied to the plants with time-delay and the DC servo motor Computer simulations are conducted at the step input and the system performances are evaluated in the ITAE.

• 한국경영과학회지
• /
• 제17권3호
• /
• pp.67-78
• /
• 1992

MODM (multiobjective decision-making) problem is very complex system for the analyst. The problem is more complex if the goals of each of the objective functions are expressed imprecisely. It requires suitable MODM method to deal with imprecisions. Therefore, we present a new interactive fuzzy decision making method for solving multiobjective nonlinear programming problems by assuming that the decision maker (DM) has imprecise goals that assume fuzzy linguistic variable for each of the objective functions. The imprecise goals of the DM are quantified by eliciting corresponding membership functions through the interactive with the DM out of six membership functions. After determining membership functions, in order to generate the compromise or satisficing solution which is .lambda.-pareto optimal, .lambda.-max problem is solved. The higher degree of membership is chosen to satisfy imprecise goals of all objective functions by combining the membership functions. Then, the values are the compromise or satisficing solution. On the basis of the proposed method, and interactive computer programming is written to implement man-machine interactive procedures. Our programming is a revised version of sequential unconstrained minimization technique. Finally, a numerical example illustrates various aspects of the results developed in this paper.

• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1287-1292
• /
• 2010

본 연구에서는 균열선단 주위의 응력장을 균열선단으로부터 떨어진 일직선상에서 유한요소법에 의해 계산된 광탄성 등색프린지 차수와 급수형 등각사상 맵핑함수를 이용하여 해석하였다. 해석된 광탄성 응력장을 실제의 광탄성프린지와 비교하였다. 정성적인 비교가 용이하도록 디지털 영상처리에 의해 등색프린지 패턴을 2 배로 증식시키고, 증식된 프린지를 다시 세선처리하여 서로 비교하였다. 유한요소법으로 계산된 프린지 차수를 이용한 하이브리드 응력장 해석에 의해 계산된 프린지와 광탄성 실험에 의한 실제의 프린지를 정성적이고 정량적인 비교를 하였다. 입력된 변위와 계산된 변위의 퍼센트 오차는 18 개의 데이터 모두 6.0% 이하로 서로 일치하였다. 또한 하이브리드 기법에 의한 정규화시킨 응력확대계수 $K_I$ 및 $K_{II}$는 유한요소법과 경험식으로 계산된 값에 근접하였다.