• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.9
• /
• pp.1-7
• /
• 2014

Brushless Direct Current(BLDC) Motor is essential to measure a rotor position because of that this motor type needs to synchronize the rotor's position and changeover phase current instead of a brush and commutator used on the existing dc motor. Recently, many researches have studied on sensorless control drive for BLDC motor. The conventional control methods are a compensation value dq, Kalman filter, Fuzzy logic, Neurons neural network, and the like. These methods has difficulties of detecting BEMF accurately at low speed because of low BEMF voltage and switching noise. And also, the operation is long and complex. So, it is required a high-performance microprocessor. Therefore, it is not suitable for a small BLDC motor sensorless drive. This paper presents control methods suitable for economic small BLDC motor sensorless drive which are an improved design of the BEMF detection circuit, simplifying a complex algorithm and computation time reduction. The improved motor sensorless drive is verified stability and validity through being designed, manufactured and analyzed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.9
• /
• pp.64-72
• /
• 2012

The interest in wind power generation area such as developing and operating wind-diesel pilot complex in remote and island regions that have difficulty in having power plant and connecting to power system is growing rapidly in the world. We have installed and researched the hybrid system in Sekgok Pilot Complex to meet the new generation system. From the monitored data of the system, the performance of each diesel power plant is outstanding. However, step out problem was detected with respect to load sharing and synchronization with decentralized power supply. An advanced controller design having better response time and stability is needed to solve such problem. In this paper, we proposed the algorithm, through digital controller of Governor, which is applied to hybrid system. As a result, we obtained the stable frequency value in variable loading conditions. Also, we proved the advanced response time and stability through the simulation and experiment by applying additional current signal to the control algorithm.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.67-72
• /
• 2019

In manufacturing sites that process and produce parts in large quantities for the automotive and electronics industries, users require the reducing of costs and shortened delivery times. To meet these demands, an increase in the number of processes and an decrease in assembly times need to be addressed. Gantry loaders currently on the market in Korea are mostly used for processing lightweight and simple shapes and are not suitable for conveying and processing complex shapes such as automobile engines and aircraft parts. This makes it difficult to mount the material in place. This study aims to smoothen the transportation of complex shapes through the development of jigs and various approaches in the installation of the feed shaft by researching the gantry loader system for transporting multiple materials with complex shapes.

• Journal of KIBIM
• /
• v.5 no.4
• /
• pp.47-52
• /
• 2015

This paper presents a case study using Building Information Modeling (BIM) for planning, simulating, and implementing complex site logistics in a headquarter office building construction project in Silver Spring, MD. As part of the project a prefabricated 92ft structural tube steel pedestrian connector bridge was installed between two adjacent buildings in the city of Silver Spring, MD. There were multiple significant challenges to deliver, offload, prepare, and install the connector bridge safely, on time, and with the minimum disturbances to the neighbors. BIM was of the foremost importance to visualize, simulate, analyze, improve, and communicate the site logistics plan from delivery to installation of the connector bridge. As a result of the effort, GC of the project was able to prepare a highly detailed plan, communicate it effectively to all stakeholders, and flawlessly execute the work as planned. This case study would provide a useful reference for contractors who are seeking a better planning method that enables generation of more accurate, implementable, optimized plans for complex site logistics.

• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.1
• /
• pp.65-72
• /
• 2013

Neighborhood park has the multiple functions toward quantitative and qualitative improvement of quality of citizen's life. This study is about neighborhood park in 4 Local Industry Complex of Cheonan City. Through this study has intended to analyze the status of use and the importance level of facilities. To reach this goal, this study has analyzed the general information, use and importance level of users through such statistical methods as frequency analysis, regression analysis and reliability analysis. As a result, users has the speciality in the neighborhood park in industry complex. Break area or facilities for the workers should be installed. Not end once installed, but continually improved and more efficient management of park facilities will be made. Also, importance of facilities analysis has the higher in normal or importance. Management and cleanliness is especially higher in importance. Importance for the overall facility was affecting in order the facility design, management, safety, installation number.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.49-54
• /
• 2008

This study is to investigate an optimal size and position of PV system for apartment complex enough the electrical load matching analysis. The 4 types of arrangements of apartment buildings are considered as follows; ㅡtype, alternative ㅡtype, ㄱtype and ㅁtype. We assume that the studied site is composed of 9 buildings. Firstly, solar access evaluation of roof and facade in apartment buildings was performing with the hourly simulations of total received insolation on each surface considering the hading effect of buildings. Electrical load profile of typical Korean apartments was investigated for the lad matching analysis. To calculate an annual total PV output, we used MERIT program which is a sourly based load matching tool developed by ESRU. TRY weather data of Daejeon are applied for this analysis. Result shows that approximately 11% of total electric load of the site can be supplied by the PV system in the case of full installation of PV system at the whole south-face roof area of 9 buildings in this stuided apartment complex. Depending of a various installation option of roof and facade area, the possible ratio of PV supply in total electrical load varies from 9% to 42%. Among the 4 arrangement types, the ㅡ type revealed the best option for the maximum output of PV system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.24-33
• /
• 2005

This paper presents dimming control system for automotive 35[W] metal halide discharge(MHD) lamp electronic ballast using digital control method. HID system has been becoming increasingly popular due to its superior performance(high luminous efficacy, good color rendering and long life etc.)over the conventional halogen system. However, this lamp demands a highly efficient ballast and very complex control circuitry that can control complex transient state in applying to automotive. Therefore, in this paper, digital control method for the HID lamp ballast is presented for optimal control that can adapt complex transient state, steady state and various environments. In developed dimming system, the system is designed to control the lamp output voltage step by step using microcontroller according to cds sensor. Therefore the designed dimming control system give good driving condition to diver and realize the power control effectively. The results of the proposed system is verified through various simulation results and the experiment results.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.4
• /
• pp.68-77
• /
• 1996

In this study, for the capacity estimation of emergency electric generators built in apartment complex using NEGA C 201 method, it was proposed application methods of simultaneously starting groups and demand factors. Also, it was suggested that capacities of the electric generator might be calculated for two kinds of electric facilities; one is loads for the convenience of tenants when main electric supply cuts off, and the other is loads for fire. For 7 apartment complex of large-size (about 1, 500 households), medium- size (about 1, 000 households) and small - size (about 500 households), electric generator capacities were calculated and electric power were measured. Through the comparison between calculated values and measured values, it could be proved the suitability of these application methods. In addition, the calculated electric generator capacities were appeared to fit into engin capacities by NEGA C 201 method as well as those by conventional method.

• Particle and aerosol research
• /
• v.15 no.1
• /
• pp.1-13
• /
• 2019

Current desulfurization and denitrification technologies have reached a considerable level in terms of reduction efficiency. However, when compared with the simultaneous reduction technology, the individual reduction technologies have issues such as economic disadvantages due to the difficulty to scale-up apparatus, secondary pollution from wastewater/waste during the treatment process, requirement of large facilities for post-treatment, and increased installation costs. Therefore, it is necessary to enable practical application of simultaneous SOx and NOx treatment technologies to remove two or more contaminants in one process. The present study analyzes a technology capable of maintaining simultaneous treatment of SOx and NOx even at low temperatures due to the electrochemically generated strong oxidation of the wet-pulse complex system. This system also reduces unreacted residual gas and secondary products through the wet scrubbing process. It addresses common problems of the existing fuel gas treatment methods such as SDR, SCR, and activated carbon adsorption (i.e., low treatment efficiency, expensive maintenance cost, large installation area, and energy loss). Experiments were performed with varying variables such as pulse voltage, reaction temperature, chemicals and additives ratios, liquid/gas ratio, structure of the aeration cleaning nozzle, and gas inlet concentration. The performance of individual and complex processes using the wet-pulse discharge reaction were analyzed and compared.

• The Journal of Art Theory & Practice
• /
• no.15
• /
• pp.167-198
• /
• 2013

This paper explores rich and complex implications of Marcel Duchamp's Mile of String which he created for "First Papers of Surrealism," the Surrealist international exhibition in New York in 1942. Part of a larger project devoted to investigating Duchamp's role in Surrealist exhibitions and his relation to the avant-garde group, this paper focuses on Duchamp's exhibition installation in the 1942 show. Under the title of "g$\acute{e}$n$\acute{e}$rateur-arbitre" Duchamp played an important role as installation and exhibition designer in a series of major Surrealist exhibitions in the 1930's-1960's. The "First Papers of Surrealism" was held by Surrealists who exiled in New York during World War I, and Duchamp created a labyrinthine installation of string for the exhibition, which physically blocked the spectator and optically hindered his or her contemplative view. Unraveling the intricately related meanings of Mile of String as an independent work of art and an installation for a specific exhibition, I examine the work on two levels: first, how the work was situated in the context of Duchamp's oeuvre, particularly his earlier work employing string or thread; second, how and in what way the installation rendered a critique on Surrealism as a group and an avant-garde movement. More specifically, by exploring the concepts of 'pataphysics' and voluntary 'nomadism' implicated in Duchamp's work, I suggest that his Mile of String asserted a critical stance against nationalism and collective identity of Surrealism and manifested a radical individualism founded upon what he called the spirit of 'expatriation.'