• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.5
• /
• pp.277-285
• /
• 2018

Chemo-mechanical caries removal methods are known to be more effective compared with conventional methods in pain reduction. $Carie-care^{TM}$, a chemo-mechanical caries removal agent, was introduced in 2010 but a systematic review of its efficacy has not yet been performed. The purpose of this study was to investigate the effectiveness of $Carie-care^{TM}$ on the outcomes of treatment of caries in children and adolescents. The primary outcome was pain while the secondary outcomes included complete caries removal (CCR), time, need for local anesthesia and behavioral response changes. A Comprehensive literature search was performed in PubMed, EMBASE, and the Cochrane Library up to 30 September 2018. The following keywords were used in the search: 'chemo-mechanical caries removal agent', 'dental caries', 'Carie-care', 'chemo-mechanical caries removal', 'chemo-mechanical caries excavation', other related keywords, and their combinations. From 942 studies identified, 16 were analyzed. Finally, 4 studies met the eligibility criteria and 260 teeth in 120 children and adolescents were included in this review. This review showed that $Carie-care^{TM}$ reduces pain during caries treatment but requires a longer time for effective treatment than conventional methods. Local anesthesia was not required in the Chemo-mechanical caries removal (CMCR) group. In addition, dental anxiety decreased compared to the control group, and co-operation was more positive. Therefore, it may be a useful alternative to conventional methods in children and adolescents, but further verification through additional studies is needed.

• Korean Journal of Materials Research
• /
• v.26 no.3
• /
• pp.109-116
• /
• 2016

To achieve the fabrication of high-quality Ag-coated Cu particles through a wet chemical process, we reported herein pretreatment conditions using an ammonium-based mixed solvent for the removal of a $Cu_2O$ layer on Cu particles that were oxidized in air for 1 hr at $200^{\circ}C$ or for 3 days at room temperature. Furthermore, we discussed the results of post-Ag plating with respect to removal level of the oxide layer. X-ray diffraction results revealed that the removal rate of the oxide layer is directly proportional to the concentration of the pretreatment solvent. With the results of Auger electron spectroscopy using oxidized Cu plates, the concentrations required to completely remove 50-nm-thick and 2-nm-thick oxides within 5 min were determined to be X2.5 and X0.13. However, the optimal concentrations in an actual Ag plating process using Cu powder increased to X0.4 and X0.5, respectively, because the oxidation in powder may be accelerated and the complete removal of oxide should be tuned to the thickest oxide layer among all the particles. Back-scattered electron images showed the formation of pure fine Ag particles instead of a uniform and smooth Ag coating in the Ag plating performed after incomplete removal of the oxide layer, indicating that the remaining oxide layer obstructs heterogeneous nucleation and plating by reduced Ag atoms.

• Journal of Powder Materials
• /
• v.26 no.4
• /
• pp.282-289
• /
• 2019

Ti has received considerable attention for aerospace, vehicle, and semiconductor industry applications because of its acid-resistant nature, low density, and high mechanical strength. A common precursor used for preparing Ti materials is $TiCl_4$. To prepare high-purity $TiCl_4$, a process based on the removal of $VOCl_3$ has been widely applied. However, $VOCl_3$ removal by distillation and condensation is difficult because of the similar physical properties of $TiCl_4$ and $VOCl_3$. To circumvent this problem, in this study, we have developed a process for $VOCl_3$ removal using Cu powder and mineral oil as purifying agents. The effects of reaction time and temperature, and ratio of purifying agents on the $VOCl_3$ removal efficiency are investigated by chemical and structural measurements. Clear $TiCl_4$ is obtained after the removal of $VOCl_3$. Notably, complete removal of $VOCl_3$ is achieved with 2.0 wt% of mineral oil. Moreover, the refined $TiCl_4$ is used as a precursor for the synthesis of Ti powder. Ti powder is fabricated by a thermal reduction process at $1,100^{\circ}C$ using an $H_2-Ar$ gas mixture. The average size of the Ti powder particles is in the range of $1-3{\mu}m$.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.611-614
• /
• 2008

Purpose: Infection, foreign body reaction and decreased volume of implant are common complications after augmentation rhinoplasty with $Gore-tex^{(R)}$ implant. The author experienced two cases of recurrent foreign body granuloma in the patients who underwent $Gore-tex^{(R)}$ removal because of infection after augmentation rhinoplasty. and treated them with complete removal of$Gore-tex^{(R)}$. Methods: Case 1: A 49 year-old female visited our clinic for recurrent foreign body reaction on nasal dorsum and tip area. The patient underwent augmentation rhinoplasty with $Gore-tex^{(R)}$ 3 years ago and implant was removed due to infection 9 months ago. Excision of the granuloma was performed and a piece of foreign body suspicious to be a $Gore-tex^{(R)}$ implant debris was detected under the subcutaneous pocket. The implant fragments were removed and nasalis muscle rotation flap was performed to cover the lesion. The specimen was proved to be $Gore-tex^{(R)}$ in histological study. Case 2: A 31 year-old-male with recurrent foreign body granuloma on the nasal tip area visited our clinic. 10 years ago, the patient had augmentation rhinoplasty with silicone implant and then, he underwent revisional rhinoplasty five times including nasal implant removal, which was performed 9 months ago. The authors excised the granuloma and found a small sized foreign body suspicious to be a $Gore-tex^{(R)}$ implant debris under the granuloma. The foreign body was excised and identified to be $Gore-tex^{(R)}$ in histological study. Results: In both cases, the lesions were healed without any complications and there were no evidences of recurrence up to 6 months of follow-up. Conclusion: The $Gore-tex^{(R)}$ is known to be weak against mechanical force. These properties of $Gore-tex^{(R)}$ make it difficult to remove the implant completely. In the patient who have infection after augmentation rhinoplasty with $Gore-tex^{(R)}$, the operator should take care to perform the complete removal without remaining fragment of the implant.

• Korean Journal of Ichthyology
• /
• v.35 no.4
• /
• pp.270-277
• /
• 2023

Since its introduction in 1973, the bass, Micropterus salmoides, has spread to dams and rivers in Korea, adversely affecting native fish communities. In this study, after complete removal of bass from Bukchosan Reservoir, an farm reservoir that has lost its function, an attempt was made to indirectly confirm the adverse effects of bass on fish by comparing fish communities in reservoirs of a similar size where bass inhabit. The study was conducted three times a year from 2019 to 2022. As a result of the study, in Bukchosan Reservoir, where the species composition of fish was judged to be simplified due to the habitat of bass, only four species such as Carassius auratus and Rhinogobius brunneus that could be used as a food source for bass appeared before the removal of bass, but after the removal of bass. The appearance and increase of the population of the introduced small freshwater fish (Oryzias sinensis, Rhinogobius giurinus) were confirmed. When comparing Gangjeong Reservoir, Susim Reservoir, which are other reservoirs inhabited by bass investigated in this study, and Bukchosan Reservoir, this result is judged to show a trend of stabilization and recovery of fish species after removal of bass in small reservoirs with high predation pressure of bass.

• Journal of Korean Neurosurgical Society
• /
• v.45 no.4
• /
• pp.256-259
• /
• 2009

The authors report a case of 42-year-old woman with an intraventricular tumor in the trigone of the left lateral ventricle. The first operation achieved a microscopically complete resection. The tumor was histologically atypical meningioma. After 26 months, there were recurrences of intraventricular meningioma. Complete resection of the tumor and adjuvant radiation therapy were performed, and the histological diagnosis was malignant meningioma. Sixteen months after the second operation, spinal metastasis in cervicolumbar lesion was diagnosed and a subtotal removal of cervical intradural extramedullary mass was performed. We describe an unusual case of intraventricular malignant meningioma with cerebrospinal fluid-disseminated spinal metastases with review of the clinical courses of previous reports.

• Journal of Korean Neurosurgical Society
• /
• v.53 no.3
• /
• pp.180-182
• /
• 2013

We describe a case of intracranial carotid artery occlusion due to penetrating craniofacial injury by high velocity foreign body that was relieved by decompressive surgery. A 46-year-old man presented with a penetrating wound to his face. A piece of an electric angular grinder disc became lodged in the anterior skull base. Computed tomography revealed that the disc had penetrated the unilateral paraclinoid and suprasellar areas without flow of the intracranial carotid artery on the lesion side. The cavernous sinus was also compromised. Removal of the anterior clinoid process reopened the carotid blood flow, and the injection of glue into the cavernous sinus restored complete hemostasis during extraction of the fragment from the face. Digital subtraction angiography revealed complete recanalization of the carotid artery without any evidence of dissection. Accurate diagnosis regarding the extent of the compromised structures and urgent decompressive surgery with adequate hemostasis minimized the severity of penetrating damage in our patient.

• Journal of Korean Neurosurgical Society
• /
• v.38 no.2
• /
• pp.136-140
• /
• 2005

The authors describe two cases of Brown-Sequard syndrome associated with cervical disc herniation. In both cases, magnetic resonance images of the cervical spine showed a large paramedian disc herniation at C5-C6 with ipsilateral severe spinal cord compression. Microsurgical removal of the herniated disc via anterior foraminotomy was performed and complete decompression of the spinal cord was achieved. Postoperatively, the neurological symptoms recovered rapidly and both patients experienced a complete remission of their symptoms. Although Brown-Sequard syndrome is rarely associated with degenerative cervical spine disease, cervical disc herniation should be kept in mind and prompt evaluations are mandatory. To the best of our knowledge, these are the first reported case of Brown-Sequard syndrome produced by cervical disc herniation which was treated by anterior foraminotomy.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.6
• /
• pp.558-560
• /
• 2012

The 5-aminolevulinic acid (5-ALA)-induced tumor fluorescence is a useful intraoperative marker for the diagnosis and the detection of various malignancies, but its use in meningioma is only reported infrequently. In meningioma, a complete resection of the tumor mass is crucial for the prevention of recurrence and postoperative morbidities. Deep sylvian meningioma is a rare type of meningioma where complete tumor removal is complicated by its deep anatomical location and close involvement with the middle cerebral artery. From our experience, 5-ALA-mediated fluorescence facilitated a safe excision whilst preserving critical neurovascular structures. To our best knowledge, this is first report from use of 5-ALA in a deep sylvian meningioma.

• Journal of Korean Neurosurgical Society
• /
• v.51 no.1
• /
• pp.54-58
• /
• 2012

We present the rare case of solitary xanthogranuloma in the upper cervical column mimicking a Brown-Sequard syndrome. A 29-year-old man complained with right hemiparesis and left hypoesthesia after a car accident. Computed tomography and magnetic resonance images revealed a lobulated homogenously well-enhancing mass in between posterior arch of the atlas (C1) and spinous process of the axis (C2) resulting in a marked spinal canal narrowing with cortical erosions. The patient was managed by complete resection of the tumor with partial laminectomy with lower half of C1 posterior arch and upper half of C2 spinous process. The authors advise complete removal of the xanthogranuloma and consideration as a differential diagnosis of lesions among upper cervical lesions.