• ETRI Journal
• /
• v.43 no.5
• /
• pp.900-908
• /
• 2021

This paper proposes thermometer-code latches having five and six transistors for unidirectional and bidirectional thermometer-code shift-registers, respectively. The proposed latches omit the set and reset transistors by changing from two supply voltage nodes to the set and reset signals in the cross-coupled inverter. They set or reset the data by changing the supply voltage to ground in either of two inverters. They reduce the number of transistors to five and six compared with the conventional thermometer-code latches having six and eight transistors, respectively. The proposed thermometer-code latches were simulated using a 65 nm complementary metal-oxide-semiconductor (CMOS) process. For comparison, the proposed and conventional latches are adapted to the 64 bit thermometer-code shift-registers. The proposed unidirectional and bidirectional shift-registers occupy 140 ㎛² and 197 ㎛², respectively. Their consumption powers are 4.6 ㎼ and 5.3 ㎼ at a 100 MHz clock frequency with the supply voltage of 1.2 V. They decrease the areas by 16% and 13% compared with the conventional thermometer-code shift-register.

• Journal of Veterinary Clinics
• /
• v.35 no.6
• /
• pp.279-281
• /
• 2018

This report describes a case of newly recognized congenital $M{\ddot{u}}llerian$ duct anomaly in a bitch. A fourteen-year-old, mixed breed bitch was presented with mild hematuria and mammary gland tumor. Complementary examinations were performed and abdominal ultrasonography revealed distended uterine horns and uterine tumor-like mass around the right ovarian area. Macroscopic examination showed the mass to be on the level of insertion of the right round ligament. The mass was cystic in nature, and had no communication with the uterine cavity. Histopathologically, the mass was identified as an accessory cavity lined by functional endometrium, which confirmed the diagnosis of accessory and cavitated uterine mass.

• ETRI Journal
• /
• v.42 no.6
• /
• pp.912-921
• /
• 2020

Quantum-dot cellular automata (QCA) is an alternative complementary metal-oxide-semiconductor (CMOS) technology that is used to implement high-speed logical circuits at the atomic or molecular scale. In this study, an optimal 2-to-4 decoder in QCA is presented. The proposed QCA decoder is designed using a new formulation based on the MV32 gate. Notably, the MV32 gate has three inputs and two outputs, which is equivalent two 3-input majority gates, and operates based on cellular interactions. A multilayer design is suggested for the proposed decoder. Subsequently, a new and efficient 3-to-8 QCA decoder architecture is presented using the proposed 2-to-4 QCA decoder. The simulation results of the QCADesigner 2.0.3 software show that the proposed decoders perform well. Comparisons show that the proposed 2-to-4 QCA decoder is superior to the previously proposed ones in terms of cell count, occupied area, and delay.

• Journal of Sensor Science and Technology
• /
• v.31 no.1
• /
• pp.1-5
• /
• 2022

In this paper, the photocurrent characteristics of gate/body-tied (GBT) metal-oxide semiconductor field-effect transistor (MOSFET)-type photodetector with high sensitivity in the 408 nm - 941 nm range are presented. High sensitivity is important for photodetectors, which are used in several scientific and industrial applications. Owing to its inherent amplifying characteristics, the GBT MOSFET-type photodetector exhibits high sensitivity. The presented GBT MOSFET-type photodetector was designed and fabricated via a standard 0.18 ㎛ complementary metal-oxide-semiconductor (CMOS) process, and its characteristics were analyzed. The photodetector was analyzed with respect to its width to length (W/L) ratio, bias voltage, and incident-light wavelength. It was confirmed experimentally that the presented GBT MOSFET-type photodetector has over 100 times higher sensitivity than a PN-junction photodiode with the same area in the 408 nm - 941 nm range.

• The Journal of Engineering Geology
• /
• v.9 no.1
• /
• pp.45-57
• /
• 1999

Groundwater flow in rock mass is controlled by the fractures developed in the area. So, the conductive fractures are very important for groundwater flow in crystalline rock. This study aims to find out the characteristics of the fracture distributed in granitic rock in the northern part of the Yusong area (latitude $36^{\circ}24'18"~36^{\circ}25'08",{\;}longitude{\;}127^{\circ}21'00"~127^{\circ}23'23"$). The electric and EM surveys were carried out in the site to delineate the fracture the fracture zones. Since geophysical survey provides non-unique solution, hydraulic data and dilling log data including BHTV scanning were used as complementary data to achieve the objective of this study. Electric survey(DC) arrays used are schlumberger and dipole-dipole arrays. VLF is used for EM survey. The main charcteristics of the fracture developed in the study aera are that fractures associated with basic dyke cut corss the main fracture zone in NNW and play an important role as hydraulic barrier. In trun, groundwater table in the upstream area is lower than that downstream area.

• Journal of Korean Society of Transportation
• /
• v.31 no.2
• /
• pp.20-32
• /
• 2013

This study is aimed at identifying the relationship of transit accessibility types to its related travel frequency in the Seoul metropolitan area. A multi-level poisson regression model is employed after categorizing transit accessibility into 18 types based on locations of residential and work workplace. Analysis results offer three policy implications in improving transit use in the Seoul metropolitan area. First, increase in transit ridership can be more effectively attained when policies concerning both competitive and complementary relationships between bus and rail transit are incorporated. Second, transfer system needs to be focused on such two modal perspectives as one travels from Seoul to suburban area and residential areas given the fact that walking accessibility to bus transit is good but that to rail transit is poor. Third, it is more effective to emphasize rail transit priority rather than bus transit, especially for the travel from suburban area to the city of Seoul in order to increase transit ridership.

• 기술발표회
• /
• s.2006
• /
• pp.146-155
• /
• 2006

A study for damage degree and reduction programs of disaster was performed after collecting and analyzing the damage data by the type of flood damage resulting from the localized rainfall Gangwon area has been damaged by heavy localized rainfall between July 15 and 17 in 2006 Specially, a number of people was killed and much properties were lost in Inje, Yangyang and Pyeongchang area Recently, the damages by debris flow has been increased more than any other disaster causes, because heavy rainfall closed to about 100mm/hr by global warming in short time has been developed frequently. In other words, an area forming a highland has a potential debris flow Therefore, in this study, the damages data by debris flow in the area of Inje and Yangyang were collected and analyzed to consider the type of flood damage In future, it must be tried to find a complementary solution and establishing management system for debris flow when the civil construction begins

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1490-1499
• /
• 2015

The purpose of this study is to improve Biotope Area Ratio(BAR) systems used in the various fields. Recently, there has been increasing demand in urban agriculture as well as more residents cultivating farms on a small scale. However, there are few measures in terms of architecture and urban planning to respond to this trend. In this sense, this research is effective as it can respond to these demands by using BAR systems. Yet, the environmental indexes are not enough since BAR systems only take account of vegetation. Therefore, this study proposes an alternative way that includes the capacity factor of the plant growth by expanding the existing BAR systems. Thus, the study analyzes the complementary possibility of BAR systems, including elements of daylight, planting interval, area and soil depth with existing BAR elements.

• Journal of The Geomorphological Association of Korea
• /
• v.28 no.3
• /
• pp.51-61
• /
• 2021

Following the previous study, we report a complementary dating data on the silty layers deposited in paleo-tidal conditions of the study area, Dangjeong-ri, Seocheon-gun and suggest coastal terrain development processes over the past 200,000 years. Based on the dating results, the silty layers distributed up to 25 m above mean sea level were deposited between 171 and 183 ka, and the gravel layer deposited in a fluvial environment of a paleo-Dangjeong stream was found to have formed between 78 and 83 ka. Considering relative altitudes of distribution, an uplift rate of the study area in the western coast is judged to be relatively 0.5~0.7 low to that of Pohang area in the eastern coast. Compared to Busan and Sacheon areas in the southern coast, it is assumed that an uplift rate of the study area shows a similar level with those during the late Quaternary.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.4 s.316
• /
• pp.26-34
• /
• 2007

Intelligent projection system indicates a system that displays desired images on an arbitrary screen in an arbitrary environment using projector without noticeable image distortion. In recent years, projectors have become widespread and ubiquitous due to their increasing capabilities and declining cost. Moreover, the size of projectors is getting smaller and handhold projectors are emerging. Thanks to these advances, the demand for intelligent projection system has been significantly increased and the demand has led to remarkable progress of the related techniques or technologies to intelligent projection system However, there are still some environments (or conditions, mainly dynamic ones) that intelligent projections systems cannot handle and they have limited the application area of intelligent projection systems. This paper exemplifies such environments (e.g. specular screen, dynamic screen) and propose effective solutions (i.e. multiple overlapping projectors, complementary pattern embedding) for thor And the usefulness of the solutions is verified through experimental results and user evaluation. Notice that the environments are considered not simultaneously but independently because it is impossible to consider them simultaneously by simply combining the solutions for each. Acually, a totally different solution would be necessary to consider them simultaneously. Therefore, we expect that the proposed methods would largely extend the application area of intelligent projection systems except for severely arbitrary environment.