• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.87-92
• /
• 2017

This paper compares the equalization algorithm of CR-MMA (Constellation Reduction-Multi Modulus Algorithm) and RMMA (Region based Multi Modulus Algorithm) for the compensation of channel's distortion in nonconstant modulus signal. In order to obtain the error signal for adaptive equalization, every signal points are reduced to the constant modulus signal in CR-MMA and every signal points are separated into the 4 regions, then the reductions are performed based on this region in RMMA. These two algorithm based on the reduction principle such as in order to updating the tap coefficient in the adaptive equalization, it has different equalization performance. The computer simulation was performed in order to compare the each equalization performance in this paper. As a result of computer simulation, RMMA has more good performance in the residual isi, maximum distortion and SER performance than CR-MMA, but not in convergence speed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.3-12
• /
• 2016

Recently, the study on 5G mobile communication systems using the millimeter-wave frequency band have been actively promoted and the importance of compensation of the nonlinearity of power amplifier caused by the characteristics of millimeter-wave frequency propagation attenuation is increasing. In the paper, we propose a piecewise polynomial model based on subdivision coefficient which are characteristics of power amplifier separated linear section and a non-linear section. In addition, the structure of digital predistortion based on the proposed model and direct learning method are proposed to implement a digital predistortion. To verify the proposed model, digital predistortion based on the proposed model and direct learning method for 60 GHz power amplifier using LTE signal implemented in the FPGA. And the hardware test bench measured performance and complexity. The proposed model achieves 3.3 dB gain over the single polynomial model in terms of the ACLR and reduces 7.5 percent in terms of the complexity.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.300-310
• /
• 2011

The purpose of this study was to examine the relationship between internal marketing, organizational commitment and business performance. Therefore this study is helped to build the strategies that is more efficient internal marketing and organizational commitment for the hospital business. A cross-sectional design was used, with a convenience sample of 284 registered nurses from two university hospitals, two general hospitals and two maternal-child hospital in one region. Collected data were analyzed by descriptive statistics, Pearson's correlation coefficient and multiple regression through the SPSS WIN program. The predicting factors for communication and organizational commitment had the explanation power of 41.5% in business performance by the individual. The hospital size, compensation and segmentation system comprise about 53.2% of business performance by the organizations. So, nursing leaders should be interest in the strategies for good business performance. It is possible that they implement the policies to suitable internal marketing strategies and the program to improve organizational commitment for nurses.

• Journal of Advanced Navigation Technology
• /
• v.22 no.3
• /
• pp.240-245
• /
• 2018

A flexible dispersion-managed link configuration is proposed by using single-mode fibers (SMFs) and dispersion-compensating fibers (DCFs) with irregular dispersion coefficients and lengths over all fiber spans for compensating of WDM channels distortion due to the group velocity dispersion and nonlinear effects of optical fibers. The flexibility of link is enabled by artificially distributing of these fibers based on the dispersion coefficients of DCFs in each half transmission section. The simultaneous ascending and descending (AD) distribution of the DCF's coefficients before and after the optical phase conjugator, respectively, best compensates the distorted wavelength division multiplexed signals in the optical link. Therefore, to improve the compensation effect of the distorted WDM channels, AD distribution is needed to choice regardless of fiber lengths and the residual dispersion per span and fiber's dispersion coefficients.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1123-1131
• /
• 2005

In this paper, optimal position of optical phase conjugator (OPC) for best compensating distorted WDM channels due to both chromatic dispersion and self phase modulation (SPM) in $8{\times}40$ Gbps WDM systems is numerically investigated, and the eye opening penalty (EOP) and bit error rate (BER) characteristics of overall WDM channels at this position is investigated, comparing with that in case of OPC placed at mid-way of total transmission length. It is confirmed that the compensation extents in WDM system with OPC is more improved by the shifting OPC position from the mid-way of total transmission length, depending on the modulation format and fiber dispersion coefficient. Ant it is confirmed that, from a viewpoint of the reception performance, EOP of each channel is more or less different with one another, but the BER characteristics of overall channels are almost equal.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.4
• /
• pp.251-257
• /
• 2015

In ultrasonic nonlinear parameter measurement using the fast Fourier transform(FFT) of tone-burst signals, the side lobe and leakage on spectrum because of finite time and non-periodicity of signals makes it difficult to measure the harmonic magnitudes accurately. The window function made it possible to resolve this problem. In this study, the effect of the Hanning and Turkey window functions on the experimental measurement of nonlinear parameters was analyzed. In addition, the effect of changes in tone burst signal number with changes in the window function on the experimental measurement was analyzed. The result for both window functions were similar and showed that they enabled reliable nonlinear parameter measurement. However, in order to restore original signal amplitude, the amplitude compensation coefficient should be considered for each window function. On a separate note, the larger number of tone bursts was advantageous for stable nonlinear parameter measurement, but this effect was more advantageous in the case of the Hanning window than the Tukey window.

• Composites Research
• /
• v.25 no.1
• /
• pp.26-30
• /
• 2012

This study was focused on the measurement of thermal expansion coefficients for GRP pipe through strain gage circuits. First of all, thermal expansion coefficients of aluminum beam were measured to examine the validity of the suggested method by using various types of strain gage circuits. Thermal expansion coefficients of GRP pipes along axial and hoop directions were measured to investigate the effect of the location of strain gages, number of repeated measurements, and strain gage types with different thermal expansion coefficients on the thermal strains and the repeatability of measured results. According to the results, thermal expansion coefficients of GRP pipes along hoop direction were lower than those along axial direction due to the constraint effect of reinforced glass fibers on thermal strains along hoop direction. As measurements were repeated, thermal expansion coefficients of GRP pipes were slightly increased, but the degree of increase became smaller. Finally, the same thermal expansion coefficients were obtained irrespective of different types of strain gages with different thermal expansion coefficients if thermal strains of strain gages were compensated by using reference compensation specimen.

• Journal of Korean Academy of Nursing Administration
• /
• v.8 no.3
• /
• pp.489-500
• /
• 2002

Purpose : The objective of this research is to explore the correlation between personality and degree of job-satisfaction among nursing profession in order to provide effective guide for HR management and nursing care. Method : The research has been conducted on hundred sixty four nurses working in C university hospital in Seoul, from February 23 to March 7 of 2002, through survey. For the experimental tools, I have used Young-Hwan Kim's MMPI(1988) personality test and Slavitt's job-satisfaction test(1978) which were improved by Eun-Seuk Lee(1988). The acquired data are analyzed through SPSS program using descriptive statistical method, t-test, One way ANOVA and Pearson Correlation coefficient analysis. Results : Most survey score were within normal range of personality measurement and Masculinity-Femininity scored high compare with the rest. Overall job-satisfaction score showed fairly high level of 3.01; in the order of high score, 3.43 for reciprocal action, 3.41 for job requirement, 3.20 for autonomy, 3.15 for professional status, 2.96 for doctor-nurse relationship, 2.54 for administration and 2.38 for compensation. Analysis based of social demographics showed that the degree of paranoia depends on the age, marriage, nursing experience, education, professional status and salary. Also, marriage had significant influence on the score of hysteria, psychopathic deviation, paranoia, psychasthenia, schizophrenia and masculinity-femininity. Test score showed that, based on the general characteristic of nursing profession, job-satisfaction depends on the age and professional status. The relationship between personality and job-satisfaction showed that depression score and social introversion score have statistically significant negative correlation with job-satisfaction. Conclusion : this research revealed that depression and social introversion are characteristics identified to have significant influence over job-satisfaction of nurses, among many characteristics.

• Journal of the Optical Society of Korea
• /
• v.20 no.5
• /
• pp.547-556
• /
• 2016

A fishing lamp is the instrument for attracting distributed fish to a certain place, and is the lighting system mainly used in fishery. In the inshore fishing, most fishing lamps are used for squid and hairtail jigging fishing, and the light source of the fishing lamps mainly used is metal halide with 1.5 KW in electric power consumption. We will analyze the irradiance distribution according to depth because squid is attracted towards light. To analyze irradiance distribution by such fishing lamps, data for seawater Type-II among the seawater types defined in 1976 are applied to East Sea. However, the Type-II data have limitations in analyzing precise seawater transmission characteristics, due to insufficient information on deep seawater. This paper analyzed the irradiance distribution of fishing lamps using the measurement of transmission characteristics in the seawater in East Sea up to 100 m underwater instead of Type-II data, which is not sufficient for transmission. A compensation factor was drawn between the actual measurement data and Type-II data through seawater transmission characteristics simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.10
• /
• pp.705-711
• /
• 2019

Dynamic behaviors of the deployable composite reflector antenna are numerically and experimentally investigated. Equations of the motion are formalized using Kane's equation by considering multibody systems with two degrees of freedom such as folding and twisting angles. To interpret structural deformations of the reflector antenna, the composite reflector is modeled using a beam model with the FSDT(First-order Shear Deformation Theory). To determine design parameters such as a torsional spring stiffness and a damping coefficient depending on deployment duration, an inverted pendulum model is simply applied. Based on the determined parameters, dynamic characteristics of the deployable reflector are investigated. In addition, its results are verified and compared through deployment tests using a gravity compensation device.