• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제5권9호
• /
• pp.285-292
• /
• 2016

최근 차량에 블루투스와 와이파이 등 근거리 통신기능을 부가하여 스마트폰과 연동함으로써, 최신 자동차는 차량 전자제어장치인 ECU를 통하여 자동차 위치정보, 고장 진단정보 등 다양한 정보를 파악할 수 있도록 엔터테인먼트화 되어 가고 있다. 본 연구를 통하여, 온보드 진단기와 스마트폰의 근거리 통신 기능을 활용하여, 차량 온보드 진단기와 연관하여 여러 가지 스마트폰 모델과 블루투스 및 근거리 무선통신인 NFC와의 호환성 시험을 실시하고, 이를 분석해 보았다. 더 나아가, 스마트폰 연동 블루투스 및 NFC 인터페이스 기능을 갖는 온보드 진단기의 단말기 구성과 고장진단 기능 구현을 비롯하여, 고장진단용 디버깅 프로그램을 개발하였다. 또한, OBD-II 인터페이스를 통해 차량의 고장진단 데이터를 추출하였으며, 끝으로 온보드 진단기 CAN 프로토콜 구현 제시와 함께 이의 결과를 분석하였다.

• Steel and Composite Structures
• /
• 제33권1호
• /
• pp.67-79
• /
• 2019

Composite columns made of high strength materials have been used in high-rise construction owing to its excellent structural performance resulting in smaller cross-sectional sizes. However, due to the limited understanding of its structural response, current design codes do not allow the use of high strength materials beyond a certain strength limit. This paper reports additional test data, analytical and numerical studies leading to a new design method to predict the ultimate resistance of composite columns made of high strength steel and high strength concrete. Based on previous study on high strength concrete filled steel tubular members and ongoing work on high strength concrete encased steel columns, this paper provides new findings and presents the feasibility of using high strength steel and high strength concrete for general double symmetric composite columns. A nonlinear finite element model has been developed to capture the composite beam-column behavior. The Eurocode 4 approach of designing composite columns is examined by comparing the test data with results obtained from code's predictions and finite element analysis, from which the validities of the concrete confinement effect and plastic design method are discussed. Eurocode 4 method is found to overestimate the resistance of concrete encased composite columns when ultra-high strength steel is used. Finally, a strain compatibility method is proposed as a modification of existing Eurocode 4 method to give reasonable prediction of the ultimate strength of concrete encased beam-columns with steel strength up to 900 MPa and concrete strength up to 100 MPa.

• 경영정보학연구
• /
• 제23권4호
• /
• pp.23-43
• /
• 2021

최근 비대면 사회로의 전환으로 많은 조직이 빠르게 스마트워크 환경을 조성하고 있다. 스마트워크의 도입은 단순히 ICT 시스템 또는 솔루션 도입이 아닌 기술적 진보에 맞춰 일하는 방식이나 직무 형태의 다양한 변화를 초래한다. 그러나 스마트워크 관련 기존 연구들은 기술수용관점에서 스마트워크 도입으로 생산성 및 효율성이 향상된다는 연구가 대부분으로 기업의 ICT 시스템이 도입되었을 때 구성원들이 느끼는 혁신저항의 문제와 조직의 관리 통제에 대한 현실적인 문제에 대한 논의는 부족하다. 본 연구는 스마트워크 도입에 대한 혁신요인과 혁신저항에서 구성원들에 대한 조직통제 방법의 조절효과를 실증분석하고 혁신저항의 관점에서 조직의 혁신이 들어왔을 때 구성원들이 저항하는 구조적인 특징을 이직의도로 확장하여 프로세스에 대한 개념적 모델과 가설을 제안하였다. 실증 분석 결과, 스마트워크 도입 관련 ICT 기술의 기업 내부 도입에 대하여 상대적 이점, 자기효능감의 수준이 높을수록 혁신저항의 수준이 낮아지고, 이용복잡성이 높을수록 혁신저항의 수준이 높아지는 것으로 나타났다. 또한 사용자들의 행동통제를 하였을 때 혁신저항이 증가하는 것으로 나타났다. 본 연구의 결과는 사례 분석을 통해 향후 스마트워크 도입에 대한 고려 사항을 제시하여 신규 도입을 위한 경영개선에 기여하는 바를 제공하고자 한다.

• 대한인간공학회지
• /
• 제30권4호
• /
• pp.541-550
• /
• 2011

Objective: The objective of this study is to present varying cases of ergonomic improvements in equipments for agricultural work. Background: In Korean agricultural sector, many older people and females, who may be more vulnerable to musculoskeletal diseases than young males, are doing high stressful tasks such as manual materials tasks, harvesting, etc. For reducing the work stress of the farmers, the Korean government has been performing support projects to provide the farmers with agricultural implements specified for their crops. In the projects, ergonomics experts have participated and helped modify the equipments. Method: Fifty cases of equipment improvements, which were carried out in 33 farming organizations cultivating 13 different crops, were reviewed and presented by equipments and their parts. Results: In total, 283 cases of improvements for 12 equipments including 4-wheel, 1-wheel, and 3-wheel powered carts, grass cutter, conveyer, pest control machine, and so on, were presented. The improvements were also classified according to the ergonomic principles like compatibility, ease of use, safety and fitting to the anthropometry, etc. Frequencies of improvements by equipment and its part were the highest in carts and controls, respectively. Principles of safety and ease of use were adopted more frequently in improving equipments than others. Conclusion: The tables of examples of improvements of agricultural implements are main results of this study and the systematical summaries are expected to be widely used in the development of more improved agricultural implements. Application: The results could be used as practical guidelines in ergonomically developing and modifying agricultural implements by both the experts and non-experts in ergonomics. The improvements would contribute to reduction of stress in farm work, which result in increasing the level of safety and health of Korean agricultural society.

• Tribology and Lubricants
• /
• 제13권1호
• /
• pp.82-87
• /
• 1997

The modern orthopaedics frequently uses the total hip replacement in the artificial hip joint. The wear in this joint requires a re-replacement of hip joints because it is under the severe load and friction conditions. To solve these problems the previous studies have been mainly focussed on the development of new materials. The research of new materials, however, needs much time and effort since it should be experimented for its bio-compatibility, friction, and wear characteristics. To reduce the work, in this study, the finite element analysis is applied to find new combinations of bio-materials in the total hip replacement which has the excellent contact characteristics. A non-linear FEM program MARC with 5-node axisymmetric element was used for analyzing the contact stresses between the hip joints. The computed results show that in case of acetabulum UHMWP has good characteristics, in femoral head, $Al_2O_3$, and in stem, Ti6Al4V.

• 한국안전학회지
• /
• 제8권3호
• /
• pp.73-77
• /
• 1993

Automation and mechanization of work make people put the machine into operation and watch the state of operations. In the process of those works, they are apt to have accidents caused by their carelessness. To reduce such accidents, we can practise TOUCH and CALL, which Is to Indicate and ascertain the dangerous parts at every process before performing works. The objectives of thls study are to show quantitatively the efficiency of TOUCH & CALL and to examine the effects of S-R compatibility. The results show that reaction time is longer(0.138-0.279sec.) in case of indicating with finge,s and shouting than that of responding only visually. On the other hand, the error rate decreases by 3.3 times-7times. From this, it is considered to verify quantitative estimation on multiple feedback of TOUCH & CALL.

• Structural Engineering and Mechanics
• /
• 제56권1호
• /
• pp.85-106
• /
• 2015

Postbuckling of thick plates made of functionally graded material (FGM) subjected to in-plane compressive, thermal and thermomechanical loads is investigated in this work. It is assumed that the plate is in contact with a Pasternak-type elastic foundation during deformation. Thermomechanical non-homogeneous properties are considered to be temperature independent, and graded smoothly by the distribution of power law across the thickness in the thickness in terms of the volume fractions of constituents. By employing the higher order shear deformation plate theory together the non-linear von-Karman strain-displacement relations, the equilibrium and compatibility equations of imperfect FGM plates are derived. The Galerkin technique is used to determine the buckling loads and postbuckling equilibrium paths for simply supported plates. Numerical examples are presented to show the influences of power law index, foundation stiffness and imperfection on the buckling and postbuckling loading capacity of the plates.

• 한국응용과학기술학회지
• /
• 제32권4호
• /
• pp.718-723
• /
• 2015

For the fabrication of the Si negative electrode in Li-ion batteries (LIBs) containing the cross-linking polymer binder, in this work, the urethane acrylate (UA) oligomer was synthesized via a simple synthetic process. The cross-linked poly(urethane acrylate) (CPUA)/carbone black (CB)/Si composite (CPUA/CB/Si composite) was fabricated through reactions between their reactive vinyl segments in the UA oligomer. Interestingly, the CPUA/CB/Si composite showed better cycle performance than the poly(vinylidene fluoride) (PVdF)/CB/Si composite (PVdF/CB/Si composite) and the polyurethane (PU)/CB/Si composite (PU/CB/Si composite). The CPUA/CB/Si composite had the best lithiation of about $2586mAh\;g^{-1}$. The UA oligomer showed a good compatibility with the electrode materials and current collector after and before a curing process.

• 연구논문집
• /
• 통권26호
• /
• pp.43-50
• /
• 1996

Present paper describes on/off design performance analysis of an 74KW industrial turboshaft gasturbine engine. Procedures to match between the compressor, combustor and turbine have been incorporated into the developed program satisfying compatibility requirement of flow and work and ratational speed. The validity of the performance results from the developed program are yet to be proved through performance experiments of the resultant engine, but comparison of the present results with those from "GASCAN(Thermoflow:America) under similar mass inlet flow, pressure ratio, and speed condition show good agreement despite present results underpredict 6-10% for power and up to 3% in efficiency, respectively.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.303-309
• /
• 1999

Optimum tribological performance of the head/disk system is critical in maintaining reliable data processing in a hard disk drive. Particularly, as the flying height of the slider continues to decrease with increasing recording density, frictional interaction between the slider and the disk need to be better understood. In this work the effect of reduced ambient pressure on the tribological behavior of the head/disk interface is presented. It is found that surface damage of the components can be accelerated by reducing the ambient pressure. This method may be utilized to assess slider/disk compatibility of newly developed systems in short time.