1 |
EN 1992-1-1 (2004), Eurocode 2: Design of Concrete Structures-Part 1-1. General Rules and Rules for Buildings, European Committee for Standardization; Brussels, Belgium.
|
2 |
EN 1993-1-1 (2005), Eurocode 3: Design of Steel Structures-Part 1-1. General Rules and Rules for Buildings, European Committee for Standardization; Brussels, Belgium.
|
3 |
EN 1994-1-1 (2004), Eurocode 4: Design of Composite Steel and Concrete Structures-Part 1-1. General Rules and Rules for Buildings, European Committee for Standardization; Brussels, Belgium.
|
4 |
Fenollosa, E., Gil, E., Cabrera, I. and Vercher, J. (2015), "Elasticplastic formulation for concrete encased sections interaction diagram tracing", Steel Compos. Struct., Int. J., 19(4), 861-876. https://doi.org/10.12989/scs.2015.19.4.861
DOI
|
5 |
Guler, K., Demir, F. and Pakdamar, F. (2012), "Stress-strain modelling of high strength concrete by fuzzy logic approach", Constr. Build. Mater., 37, 680-684. https://doi.org/10.1016/j.conbuildmat.2012.07.069
DOI
|
6 |
Han, L.H., Zhao, X.L. and Tao, Z. (2001), "Tests and mechanics model for concrete-filled SHS stub columns, columns and beamcolumns", Steel Compos. Struct., Int. J., 1(1), 51-74. https://doi.org/10.12989/scs.2001.1.1.051
DOI
|
7 |
Han, L.H., Yao, G.H. and Tao, Z. (2007), "Performance of concrete-filled thin-walled steel tubes under pure torsion", Thin-Wall. Struct., 45(1), 24-36. https://doi.org/10.1016/j.tws.2007.01.008
DOI
|
8 |
Hanswille, G., Bergmann, M. and Bergmann, R. (2017), "Design of composite columns with cross-sections not covered by Eucocode 4", Steel Constr., 10(1), 10-16. https://doi.org/10.1002/stco.201710004
DOI
|
9 |
JGJ 138-2016 (2016), Code for design of composite structures, Ministry of Housing and Urban-Rural Development of the People's Republic of China, China. [In Chinese]
|
10 |
Johansson, M. and Gylltoft, K. (2001), "Structural behavior of slender circular steel-concrete composite columns under various means of load application", Steel Compos. Struct., Int. J., 1(4), 393-410.https://doi.org/10.12989/scs.2001.1.4.393
DOI
|
11 |
Kim, D.K. (2005),"A database for composite columns", Master Dissertation; Georgia Institute of Technology, Atlanta, GA, USA.
|
12 |
Kim, C.S., Park, H.G., Chung, K.S. and Choi, I.R. (2011), "Eccentric axial load testing for concrete-encased steel columns using 800 MPa steel and 100 MPa concrete", J. Struct. Eng., 138(8), 1019-1031. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000533
DOI
|
13 |
Kim, C.S., Park, H.G., Chung, K.S. and Choi, I.R. (2013), "Eccentric axial load capacity of high-strength steel-concrete composite columns of various sectional shapes", J. Struct. Eng., 140(4), 04013091. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000879
DOI
|
14 |
Liew, J.Y.R. and Xiong, M.X. (2015), "Design guide for concrete filled tubular members with high strength materials - an extension of Eurocode 4 method to C90/105 concrete and S550 steel", Research Publishing, Sinapore.
|
15 |
Lai, B.L., Liew, J.Y.R. and Li, S. (2018), "Finite element analysis of concrete-encased steel composite columns with off-center steel section", Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures, ASCCS 2018, Valencia, June, pp. 297-303.
|
16 |
Lai, B.L., Liew, J.Y.R. and Wang, T.Y. (2019), "Buckling behaviour of high strength concrete encased steel composite columns", J. Constr. Steel Res., 154, 27-42. https://doi.org/10.1016/j.jcsr.2018.11.023
DOI
|
17 |
Lam, D. and Williams, C.A. (2004), "Experimental study on concrete filled square hollow sections", Steel Compos. Struct., Int. J., 4(2), 95-112.https://doi.org/10.12989/scs.2004.4.2.095
DOI
|
18 |
Liew, J.Y.R., Xiong, M.X. and Xiong, D.X. (2016), "Design of concrete filled tubular beam-columns with high strength steel and concrete", Structures, 8, 213-226. https://doi.org/10.1016/j.istruc.2016.05.005
DOI
|
19 |
Munoz, P.R. and Hsu, C.T. (1997), "Biaxially loaded concreteencased composite columns: design equation", J. Struct. Eng., 123(12), 1576-1585. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:12(1576)
DOI
|
20 |
Liu, S.W., Liu, Y.P. and Chan, S.L. (2012), "Advanced analysis of hybrid steel and concrete frames: part 1: cross-section analysis technique and second-order analysis", J. Constr. Steel Res., 70, 326-336. https://doi.org/10.1016/j.jcsr.2011.09.003
DOI
|
21 |
Uy, B. (2001), "Axial compressive strength of short steel and composite columns fabricated with high strength steel plate", Steel Compos.Struct., Int. J., 1(2), 171-185. https://doi.org/10.12989/scs.2001.1.2.171
DOI
|
22 |
Roik, K. and Bergmann, R. (1990), "Design method for composite columns with unsymmetrical cross-sections", J. Constr. Steel Res., 15, 153-168. https://doi.org/10.1016/0143-974X(90)90046-J
DOI
|
23 |
Tokgoz, S. and Dundar, C. (2008), "Experimental tests on biaxially loaded concrete-encased composite columns", Steel Compos. Struct., Int. J., 8(5), 423-438. https://doi.org/10.12989/scs.2008.8.5.423
DOI
|
24 |
Tsai, K.C., Lien, Y. and Chen, C.C. (1996), "Behaviour of axially loaded steel reinforced concrete columns", J. Chinese Inst. Civil Hydraulic Eng., 8(4), 535-545. [In Chinese]
|
25 |
Wang, Y.B., Liew, J.Y.R., Lee, S.C. and Xiong, D.X. (2016), "Experimental Study of Ultra-High-Strength Concrete under Triaxial Compression", ACI Mater. J., 113(1), 105-112.
|
26 |
Xiong, M.X., Xiong, D.X. and Liew, J.Y.R. (2017a), "Axial performance of short concrete filled steel tubes with high-and ultra-high-strength materials", Eng. Struct., 136, 494-510. https://doi.org/10.1016/j.engstruct.2017.01.037
DOI
|
27 |
Xiong, M.X., Xiong, D.X. and Liew, J.Y.R. (2017b), "Behaviour of steel tubular members infilled with ultrahigh strength concrete", J. Constr. Steel Res., 138, 168-183. https://doi.org/10.1016/j.jcsr.2017.07.001
DOI
|
28 |
AIJ (1997), Recommendations for design and construction of concrete filled steel tubular structures; Architectural Institute of Japan; Japan. [In Japanese]
|
29 |
ANSI/AISC 360-16 (2016), Specification for Structural Steel Buildings, American Institute of Steel Construction (AISC); Chicago, IL, USA.
|
30 |
CEB high performance concrete (1995), Bull. D'information No. 228. Lausanne; 46P.
|
31 |
Chen, C.C. and Lin, N.J. (2006), "Analytical model for predicting axial capacity and behavior of concrete encased steel composite stub columns", J. Constr. Steel Res., 62(5), 424-433. https://doi.org/10.1016/j.jcsr.2005.04.021
DOI
|
32 |
Chen, C.C. and Yeh, S.C. (1996), "Ultimate strength of concrete encased steel composite columns",Proceedings of the Third National Conference on Structural Engineering: 2197-206. (in Chinese)
|
33 |
Du, Y.S., Chen, Z.H. and Xiong, M.X. (2016), "Experimental behavior and design method of rectangular concrete-filled tubular columns using Q460 high-strength steel", Constr. Build. Mater., 125, 856-872. https://doi.org/10.1016/j.conbuildmat.2016.08.057
DOI
|
34 |
Du, Y.S., Chen, Z.H., Liew, J.Y.R. and Xiong, M.X. (2017), "Rectangular concrete-filled steel tubular beam-columns using high-strength steel: experiments and design", J. Constr. Steel Res., 131, 1-8.https://doi.org/10.1016/j.jcsr.2016.12.016
DOI
|
35 |
Ellobody, E. and Young, B. (2011), "Numerical simulation of concrete encased steel composite columns", J. Constr. Steel Res., 67(2), 211-222.https://doi.org/10.1016/j.jcsr.2010.08.003
DOI
|
36 |
Ellobody, E., Young, B. and Lam, D. (2011), "Eccentrically loaded concrete encased steel composite columns", Thin-Wall.Struct., 49(1), 53-65.https://doi.org/10.1016/j.tws.2010.08.006
DOI
|
37 |
El-Tawil, S. and Deierlein, G.G. (1999), "Strength and ductility of concrete encased composite columns", J. Struct. Eng., 125(9), 1009-1019. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:9(1009)
DOI
|
38 |
Zhu, W.Q., Meng, G. and Jia, J.Q. (2014), "Experimental studies on axial load performance of high-strength concrete short columns", Proceedings of the Institution of Civil Engineers-Structures and Buildings, 167(9), 509-519.
DOI
|