• 제목/요약/키워드: Compatibility condition

검색결과 240건 처리시간 0.021초

The Effects of Goal Orientation Consciousness versus Unconsciousness on Consumers' Choice Tendency

  • CHOI, Nak-Hwan;CHEN, Fei
    • 산경연구논집
    • /
    • 제11권1호
    • /
    • pp.7-17
    • /
    • 2020
  • Purpose: This study aimed at exploring the product choice tendency differences between the consciousness and unconsciousness of goal orientation when product attributes is perceived to be compatible with the goal orientation. Research design, data and methodology: Empirical study used a 2 (goal conscious vs. unconscious) × 3 (hedonic vs. performance vs. reliability attribute) between-subjects design and one control group. To verify hypotheses, χ2-test was conducted to 320 questionnaire data answered by undergraduate students of Jiangxi Normal University in China. Results: First, consumers under unconscious condition showed a higher product choice consistency based on compatibility between hedonic (performance) attribute of the product and their hedonic (performance) promotion goal-orientation than those under the conscious condition. Second, product choice effects of compatibility between reliability attribute of the product and prevention goal orientation were not significantly different between consumers' consciousness and unconsciousness of their prevention goal orientation. Conclusions: Marketers of 'under dog' should try to develop and deliver the product attributes different from the attributes of 'top dog.' And the 'top dog' marketers should help their customers to avoid the conflicts by developing the environment of inducing their goal orientation unconsciously. Brand marketers should always pay attention to the reliability attributes concerned with the prevention goal orientation.

수반자극과제에서 정서가 초점주의에 미치는 영향 (The Impact of Emotion on Focused Attention in a Flanker Task)

  • 박태진;박선희
    • 인지과학
    • /
    • 제22권4호
    • /
    • pp.385-404
    • /
    • 2011
  • 정서가 초점주의에 미치는 영향을 알아보기 위해 배경자극으로 제시된 그림자극의 정서가가 수반자극과제 수행에 미치는 효과를 조사하였다. 수반자극이 표적자극과 상이한 경우와 동일한 경우의 반응속도 차이(부합성효과)는 수반자극 처리에 의한 간섭, 즉 표적자극에 대한 초점주의의 실패를 의미하는데, 부합성효과에 미치는 배경 그림자극의 정서가(긍정, 중립, 부정) 효과를 분석하였다(실험 1). 그 결과, 부합성효과의 크기는 표적자극과 수반자극간 거리(시각 0.5도, 1도, 1.5도)뿐만 아니라 배경 그림자극의 정서가의 영향을 함께 받았는데, 중립과 긍정 그림 배경에서는 거리가 멀수록 부합성효과가 감소한 반면(거리효과), 부정 그림 배경에서는 거리효과가 관찰되지 않았다. 또한 배경 그림자극과 표적/수반자극 간 SOA(100ms, 2800ms)와 거리(시각 0.5도, 1.5도)를 변화시켜 부합성에 미치는 효과를 조사한 결과, 정서가에 따른 거리효과가 SOA에 따라 상이하였다(실험 2). SOA가 긴 경우, 중립과 긍정 그림 배경에서는 거리효과가 관찰되었으나, 부정 그림 배경에서는 거리효과가 관찰되지 않았다. 그리고 부합성효과가 모든 정서가에서 먼 거리와는 달리 가까운 거리에서만 유의미했다. 반면, SOA가 짧은 경우에는 모든 정서가에서 거리효과가 관찰되었으며, 부합성효과가 중립과 긍정 그림 배경에서는 두 거리조건 모두에서 유의미했지만 부정 그림 배경에서는 먼 거리에서 유의미하지 않았다. 이 결과는 전반적으로 부정정서에 의한 시각적 주의범위의 축소와 긍정정서에 의한 주의범위의 확산을 시사하는데, 특히 후자가 전자에 비해 더 일시적이라는 것을 시사한다.

  • PDF

Shear Resistant Mechanism into Base Components: Beam Action and Arch Action in Shear-Critical RC Members

  • Jeong, Je-Pyong;Kim, Woo
    • International Journal of Concrete Structures and Materials
    • /
    • 제8권1호
    • /
    • pp.1-14
    • /
    • 2014
  • In the present paper, a behavioral model is proposed for study of the individual contributions to shear capacity in shear-critical reinforced concrete members. On the basis of the relationship between shear and bending moment (V = dM/dx) in beams subjected to combined shear and moment loads, the shear resistant mechanism is explicitly decoupled into the base components-beam action and arch action. Then the overall behavior of a beam is explained in terms of the combination of these two base components. The gross compatibility condition between the deformations associated with the two actions is formulated utilizing the truss idealization together with some approximations. From this compatibility condition, the ratio of the shear contribution by the tied arch action is determined. The performance of the model is examined by a comparison with the experimental data in literatures. The results show that the proposed model can explain beam shear behavior in consistent way with clear physical significance.

점용접에 의하여 판재로 보강된 균열판의 수직응력에 의한 응력세기계수 (Stress Intensity Factor for the Cracked Sheet Subjected to Normal Stress and Reinforced with a Plate by Spot Welding)

  • 이강용;김옥환
    • Journal of Welding and Joining
    • /
    • 제15권1호
    • /
    • pp.55-65
    • /
    • 1997
  • The stress intensity factor has been calculated for the cracked plate subjected to remote normal stress and reinforced with a plate by symmetric spot welding. The solution was based on displacement compatibility condition between the cracked sheet and the reinforcement plate. It is shown that the results from the derived equation for stress intensity factor were agreed with previous solutions. The reinforcement effect gets better as a joining spot is closer to the crack tip and the other joining spots become nearer to the crack surface.

  • PDF

철근콘크리트 보의 전단력 재분배 (Redistribution of Internal Shear Forces in a Reinforced Concrete Beams)

  • 이창신;신근옥;김대중;김우
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
    • /
    • pp.362-365
    • /
    • 2006
  • This paper presents a model for evaluating the contribution by arch action to shear resistance in shear-critical RC beams. Based on the relationship between shear and bending moment in beams subjected to combined shear and bending, The behavior of a beam is explicitly divided into two base components of the flexural action and the tied arch action. The compatibility condition of the shear deformation that deviates from Bernoulli bending plane is formulated utilizing the smeared truss idealization with an inclined compression chord. From this shear compatibility condition in a beam, the shear contribution by the arch action is numerically decoupled.

  • PDF

운전자 주행 적합성 진단을 위한 연구 II: 생체신호 추출, 선정 및 정량화 (The Study to Diagnose the Road-Driver Compatibility II: Data Collection, Variable Selection and Parameter Quantification)

  • 김정룡;윤상영;박지수
    • 대한산업공학회지
    • /
    • 제30권1호
    • /
    • pp.50-57
    • /
    • 2004
  • The aim of this study is to collect driver's psychophysiological signal under various road condition and to select and quantify psychophysiological variables for diagnosis of road-driver compatibility. A 4x4 vehicle with measuring devices was developed to collect driver's psychophysiological signal and collected driver's psychophysiological signal under various road conditions. The collected data were analyzed by the temporal pattern of signal overtime. Thirteen bio-signals with consistent pattern were selected and quantified in terms of slope and amplitude of the signal. These quantified values could be used as a part of tool to diagnose the road-driver compatibility.

전단변형적합조건에 기반한 철근콘크리트 부재의 전단 해석 모델 (Shear Behavioral Model based on Shear Deformation Compatibility in Reinforced Concrete Members)

  • 김우;이창신;정제평
    • 콘크리트학회논문집
    • /
    • 제18권3호
    • /
    • pp.379-388
    • /
    • 2006
  • 본 연구의 목적은 휨과 전단에 지배 받는 철근콘크리트 보에서 아치작용에 의한 전단기여분을 평가하는 모델을 개발하는 것이다. 전단력은 휨모멘트의 변화률이라는 관계식을 기초로, 분산트러스 이상화 기법을 이용하여 횡단면에서 베르누이(Bernoulli) 휨 평면으로부터 전단변형적합조건을 새롭게 유도하였다. MCFT와 분산트러스 이상화를 통해 전단흐름에 의한 복부전단요소의 전단곡률을 일치시키는 전단변형적합조건을 수립하였다. 전단변형적합조건을 이용하면, 보 전단거동은 타이드아치작용과 보 작용의 두 성분으로 수치적 분해 될 수 있다. 그리고 두 기본 작용의 분해가 가능하기 때문에 전단에 지배받는 보의 내력을 예측할 수 있다. 제안 모델의 유효성은 기존 문헌에 수록된 활용 가능한 실험 자료를 통해 검증하였고, 수행 결과는 예측치와 실험치 사이에서 실질적으로 일치하는 결과를 얻었다. 결과의 정확성으로부터 제안 모델의 합리성을 확신할 수 있었다.

A Framework for Designing Closed-loop Hand Gesture Interface Incorporating Compatibility between Human and Monocular Device

  • Lee, Hyun-Soo;Kim, Sang-Ho
    • 대한인간공학회지
    • /
    • 제31권4호
    • /
    • pp.533-540
    • /
    • 2012
  • Objective: This paper targets a framework of a hand gesture based interface design. Background: While a modeling of contact-based interfaces has focused on users' ergonomic interface designs and real-time technologies, an implementation of a contactless interface needs error-free classifications as an essential prior condition. These trends made many research studies concentrate on the designs of feature vectors, learning models and their tests. Even though there have been remarkable advances in this field, the ignorance of ergonomics and users' cognitions result in several problems including a user's uneasy behaviors. Method: In order to incorporate compatibilities considering users' comfortable behaviors and device's classification abilities simultaneously, classification-oriented gestures are extracted using the suggested human-hand model and closed-loop classification procedures. Out of the extracted gestures, the compatibility-oriented gestures are acquired though human's ergonomic and cognitive experiments. Then, the obtained hand gestures are converted into a series of hand behaviors - Handycon - which is mapped into several functions in a mobile device. Results: This Handycon model guarantees users' easy behavior and helps fast understandings as well as the high classification rate. Conclusion and Application: The suggested framework contributes to develop a hand gesture-based contactless interface model considering compatibilities between human and device. The suggested procedures can be applied effectively into other contactless interface designs.

단순지지된 RC보에서의 아치효과를 고려한 전단변형적합조건 (Shear Compatibility Condition with Arch Action in Simply Supported RC Beam)

  • 이성철;조재열;김우;박병선
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
    • /
    • pp.847-850
    • /
    • 2008
  • 집중하중을 받는 콘크리트 보 부재의 경우 전단 경간에서 내부 모멘트 팔길이가 변화하는 아치 현상이 발생하게 된다. 최근 이러한 점을 고려한 전단해석모델이 개발되었으나, 복부 요소의 전단 거동해석에 있어서 그 해석 과정이 매우 복잡할 뿐만 아니라 철근의 재료 성질을 항복 후 완전 소성거동을 보이는 것으로 간주하여 해석할 수밖에 없는 단점을 지니고 있다. 또한, 아치 작용에 의한 전단력의 비율을 산정하는데 있어 이용되는 전단변형적합조건에서 내부 모멘트 팔길이의 변화가 고려되어 있지 않아 전단경간에 따른 전단변형률의 분포가 실험으로부터 측정되는 분포 경향과 일치하지 않는 단점이 있다. 이에 본 연구에서는 기존의 아치 효과를 고려한 콘크리트 보 부재의 전단해석모델에서 복부 요소의 전단 해석을 좀 더 간편화하여 일반적인 철근의 재료 모델을 적용할 수 있도록 하였다. 또한, 내부 모멘트 팔길이의 변화를 고려한 전단변형적합조건을 유도하여 실제 보 부재의 전단 경간에서의 변형률의 경향을 보다 잘 묘사할 수 있는 전단해석모델을 제시하였다. 제시된 전단해석모델은 집중하중을 받는 콘크리트 보 부재의 전단 거동 예측에 유용할 것으로 사료된다.

  • PDF

초기평형상태 구현을 위한 사장교의 폐합단계 해석 (Closing Step Analysis in Cable-Stayed Bridges to Produce Initial Equilibrium Condition)

  • 박용명;윤재순;조현준;박충곤
    • 한국강구조학회 논문집
    • /
    • 제19권2호
    • /
    • pp.191-199
    • /
    • 2007
  • 본 연구에서는 캔틸레버 공법으로 가설되는 사장교의 최종단계에서 초기평형상태를 구현하기 위한 폐합 방법을 제안하였다. 캔티레버식 가설에 의한 사장교에서 초기평형상태의 구현을 위해서는 거더 폐합단계에서 폐합단면 양측의 연직 처짐, 회전각 및 축방향 변위에 대한 적합조건을 만족시켜야 하는데, 본 연구에서는 실제 시공시 적용 가능한 데릭 크레인의 인양력과 케이블의 장력, 그리고 주탑부에 설치된 유압잭을 이용하여 적절한 폐합이 가능함을 제시하였다. 제안된 방법을 예제 교량의 시공단계 해석에 적용하여 그 타당성을 검증하였으며, 폐합시 축방향 변위에 관한 적합조건의 고려 여부가 주탑의 결과에 큰 영향을 끼치는 것으로 나타났다.