• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.99-103
• /
• 2001

We have conducted two runs of interlaboratory comparison on Ag-sheathed Bi-2223 tapes to evaluate the level of measurement techniques for the critical current measurement. Two classes of specimens were prepared for parallel and serial routings and sent to four participating laboratories. The critical currents of specimens were measured at 77 K in zero magnetic field. In the first comparison, we used twenty different Bi-2223 tapes as specimens for comparison and participating laboratories measured the specimens using their own instruments and procedures. As a result, the scattering of data on the first comparison showed -3.0% to +l2.2% for the parallel routing and -0.7% to +l5.1% for the serial routing. Major sources of these variations were attributed to different measurement techniques. Thus, the second comparison of measurement was done on the same specimens under specified measurement conditions, particularly in terms of cooling procedure and sweep rate of the test current. The variations for the second comparison were decreased -3.1% to +3.2% far the parallel routing and -1.8% to +7.7% fur the serial routing.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.22 no.3
• /
• pp.80-94
• /
• 2009

Objective : The purpose of this clinical research is the investigation of the effects between acupuncture group(control group) and NURIEYE-1 group (experimental group) in myopia Methods : Comparison clinical study was conducted with the randomly arranged 32 patients for acupuncture group(control group) and NURIEYE-1 group(experimental group). For effectiveness evaluation, eye sight test, MQOL and DITI were tested three times with visits for every 4 weeks. With SAS, Statistical analysis was performed by using paired t-test and two sample t-test. Statistical significance was achieved with less than 5% probability (p<0.05). Result : 1. There was no significant effect from the eye sight comparison between the two group. We had improved results in average with MQOL, however, there was no statistical significance. Though there was also no significant result with DITI average comparison between two group, we witnessed significant effect in some part of MQOL. 2. Nevertheless Periodical comparison test showed weak significance with eye sight and DITI, significant effect was found in some part of MQOL. 3. With periodical comparison tests, there were significant effects in eye sight, MQOL and DITI with the experimental groups and control groups, respectively. Conclusion : There was no significant eye sight improvement. However, with acupuncture point stimulation, we think there are some positive effects for the relaxation of excessive stress in eyes.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.3
• /
• pp.1-17
• /
• 2013

The purpose of this study was to identify the relationships among self-esteem, physical appearance comparison, media concern, sociocultural attitude toward appearance, body attitudes, and life satisfaction. Data were collected from a convenience sample of 232 female undergraduate students. Data were analyzed using factor analysis, correlation, and multiple regression. The result showed that there was a correlation between physical appearance comparison and media concern. Self-esteem, physical appearance comparison, and media concern had an indirect influence on body attitudes through sociocultural attitude toward appearance. Self-esteem and physical appearance comparison had a direct effect on body attitude. All variables did not have an influence on life satisfaction, except self-esteem.

• The Journal of Korean Physical Therapy
• /
• v.27 no.2
• /
• pp.81-84
• /
• 2015

Purpose: The purpose of this study was to compare the effect of 'knowledge of result' and 'knowledge of performance', two types of extrinsic feedbacks, during the sit-to-stand movement in children with hemiplegic cerebral palsy. Methods: A total of ten children with hemiplegic cerebral palsy (ages 8 to 12 years) were recruited for the study. Subjects with hemiplegic cerebral palsy performed sit-to-stand movement in front of a mirror. Their performance was supervised and revised for normal movement by a pediatric physiotherapist. In the knowledge of the result, subjects performed sit-to-stand using a chair with an armrest in their mind with normal movement. In the knowledge of performance, subjects performed sit-to-stand under verbal instructions. Randomized cross over trials were used in this study. Main outcome measurements were as follows: mediolateral speed, anteroposterior speed, velocity moment, extent in mediolateral direction, extent in anteroposterior direction, and vertical distance of the center of pressure. Results: The mediolateral speed and extent of center of pressure was higher for 'knowledge of performance' in comparison with the other type of extrinsic feedbacks (p<0.05). The other parameters, including anteroposterior speed and extent, and vertical speed of the center of pressure, did not differ between the two types of extrinsic feedbacks (p>0.05). Conclusion: These findings suggested that training in sit-to-stand movement with 'knowledge of result' may result in better use of extrinsic feedback.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.339-345
• /
• 2021

In this paper, estimation angle performance analysis of amplitude-comparison monopulse radar under additive noise effect is dealt with. When uncorrelated white noises are added to the squinted beams, the angle estimation performance is analyzed through the mean square error(MSE). The numerical integration-based mean square error result completely overlaps the Monte Carlo-based mean square error result, which corresponds to 99.8% of the Monte Carlo-based mean square error result. In addition, the mean square error analysis method based on numerical integration has a much faster operation time than the mean square error method based on Monte Carlo. the angle estimation performance of the amplitude comparison monopulse radar can be efficiently analyzed in various noise environments through the proposed numerical integration-based mean square error method.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2012.10a
• /
• pp.127-128
• /
• 2012

• Journal of the Korean Ceramic Society
• /
• v.44 no.4 s.299
• /
• pp.235-239
• /
• 2007

For the pressure compaction process of the ceramic powder, the density distribution is very important for the uniform shrinkages at the sintered body. In this paper, we fabricated alumina green body using compaction process and simulated about same condition. Then comparison of simulation and experimental result confirmed that accuracy of simulation. On the average density of top and lower part was each $2.41g/cm^3,\;2.27g/cm^3$ and deviation at final step was calculated with 0.06 in simulation. Also, experiments show that total density of top and lower part was each $2.59g/cm^3,\;2.36g/cm^3$, and deviation was 0.09. Conclusion, that was not a difference to the simulation and experimental result. The application using the finite element simulation method is possible optimization of the compressing process, predict generated part of cracks and there is a possibility of getting result of more fast, more accurate then existing experience method.