• Korean Journal of Community Nutrition
• /
• v.21 no.6
• /
• pp.520-532
• /
• 2016

Objectives: The objective of this study was to assess energy expenditure and metabolic cost (METs) of walking activities of college students and to compare treadmill based walking with self-selected hallway walking. Methods: Thirty subjects (mean age $23.4{\pm}1.6years$) completed eight walking activities. Five treadmill walking activities (TW2.4, TW3.2, TW4.0, TW4.8, TW5.6) were followed by three self-selected hallway walking activities, namely, walk as if you were walking and talking with a friend: HWL (leisurely), walk as if you were hurrying across the street at a cross-walk: HWB (brisk) and walk as fast as you can but do not run: HWF (fast) were performed by each subject. Energy expenditure was measured using a portable metabolic system and accelerometers. Results: Except for HWF (fast) activity, energy expenditures of all other walking activities measured were higher in male than in female subjects. The lowest energy expenditure and METs were observed in TW2.4 ($3.65{\pm}0.84kcal/min$ and $2.88{\pm}0.26METs$ in male), HWL (leisurely) ($2.85{\pm}0.70kcal/min$ and $3.20{\pm}0.57METs$ in female), and the highest rates were observed in HWF (fast) ($7.72{\pm}2.81kcal/min$, $5.84{\pm}1.84METs$ in male, $6.65{\pm}1.57kcal/min$, $7.13{\pm}0.68METs$ in female). Regarding the comparison of treadmill-based walking activities and self-selected walking, the energy expenditure of HWL (leisurely) was not significantly different from that of TW2.4. In case of male, no significant difference was observed between energy costs of HWB (brisk), HWF (fast) and TW5.6 activities, whereas in female, energy expenditures during HWB (brisk) and HWF (fast) were significantly different from that of TW5.6. Conclusions: In this study, we observed that energy expenditure from self-selected walking activities of college students was comparable with treadmill-based activities at specific speeds. Our results suggested that a practicing leisurely or brisk walking for a minimum of 150 minutes per week by both male and female college students enable them to meet recommendations from the Physical activity guide for Koreans.

• The Korean Journal of Mycology
• /
• v.34 no.2
• /
• pp.79-83
• /
• 2006

This study was made to investigate the difference of the shiitake productivity according to the use of sawdust, plug-shaped and liquid spawn. Contamination of medium was confirmed by eye. There was no contamination in the liquid spawn treatment. And, contamination rates in the sawdust spawn and plug-shaped spawn were 6.7%, respectively. Productivity of fruit-bodies was 725.1 g from sawdust spawn, 726.2 g from plug-shaped spawn and 573.9 g from liquid spawn until 3rd flushing of fruit-bodies. The number of fruit-bodies was 57.4 per medium of sawdust spawn, 64.3 plug-shaped spawn and 45.1 liquid spawn. At yield per medium, the percentage of media producing over 1,000 g was 13% in plug-shaped spawn and 7% in liquid spawn. However, there was no medium producing over 1,000 g of fruit-bodies in sawdust spawn. Fruit-bodies of $600{\sim}900g$ were yielded from 79% of sawdust spawn treatment, 53% plug-shaped spawn and 33% liquid spawn treatment. When compared the productivity of fruit-bodies, liquid spawn treatment appeared lower than sawdust spawn and plug-shaped spawn treatment at 1st flushing, but appeared higher than the others at 2nd and 3rd flushing.

• Journal of Life Science
• /
• v.13 no.6
• /
• pp.896-902
• /
• 2003

The present study was carried out to investigate the antiobesity effects of Platycodon grndiflorum extract on body weight changes and serum lipid composition of rats fed high fat diet. The Platycodon grandiflorum has been widely used as a folk food in the Orient for many centuries. We had experiment with Platycodon grandiflorum extract in order to find cure effects for obesty. The changes of the body weights in Platycodon ggrandiflorum extract treatment group showed a decrease in comparison with control group. Weekly body weights of PG group are respectively 243.7$\pm$2.0g, 283.5$\pm$4.3 g, 310.5$\pm$6.5 g, 333.2$\pm$7.5 g, 361.0$\pm$10.4 g, 390.5$\pm$11.5 g, 436.0$\pm$11.8 g, 454.4$\pm$11.4 g, 484.4$\pm$10.1 g. Body weight of PC groups are decreased compared with those of control group, but the rates are not significant. Total cholesterol of PG group(77.2$\pm$3.3 mg/dl) is decreased by 7.0% compared with that of control group. Serum triglyceride of PG group(103.6$\pm$9.0mg/dl) is decreased by 21.1% compared with that of control group. Serum free fatty acid of PG group(630.1$\pm$45.9 $\mu$Eq/l) is decreased by 19.6% .compared with that of control group. Total lipid amount of PG group(393.6$\pm$23.7 mg/dl) is decreased by 9.1% compared with that of control group. The above results suggest that Platycodon grandiflorum extract could prevent or cure metabolic diseases by preventing hyperlipemia caused by high fat diet.

• Journal of Radiation Protection and Research
• /
• v.48 no.4
• /
• pp.197-203
• /
• 2023

Background: The thermoluminescent dosimeter (TLD) and Monte Carlo (MC) dosimetry are carried out to determine the occupational dose for personnel in the handling of ¹²⁵I seed sources. Materials and Methods: TLDs were placed in different layers of the Alderson-Rando phantom in the thyroid, lung and also eyes and skin surface. An ¹²⁵I seed source was prepared and its activity was measured using a dose calibrator and was placed at two distances of 20 and 50 cm from the Alderson-Rando phantom. In addition, the Monte Carlo N-Particle Extended (MCNPX 2.6.0) code and a computational phantom with a lattice-based geometry were used for organ dose calculations. Results and Discussion: The comparison of TLD and MC results in the thyroid and lung is consistent. Although the relative difference of MC dosimetry to TLD for the eyes was between 4% and 13% and for the skin between 19% and 23%, because of the existence of a higher uncertainty regarding TLD positioning in the eye and skin, these inaccuracies can also be acceptable. The isodose distribution was calculated in the cross-section of the head phantom when the ¹²⁵I seed was at two distances of 20 and 50 cm and it showed that the greatest dose reduction was observed for the eyes, skin, thyroid, and lungs, respectively. The results of MC dosimetry indicated that for near the head positions (distance of 20 cm) the absorbed dose rates for the eye lens, eye and skin were 78.1±2.3, 59.0±1.8, and 10.7±0.7 µGy/mCi/hr, respectively. Furthermore, we found that a 30 cm displacement for the ¹²⁵I seed reduced the eye and skin doses by at least 3- and 2-fold, respectively. Conclusion: Using a computational phantom to monitor the dose to the sensitive organs (eye and skin) for personnel involved in the handling of ¹²⁵I seed sources can be an accurate and inexpensive method.

• Journal of Gastric Cancer
• /
• v.13 no.1
• /
• pp.26-33
• /
• 2013

Purpose: The aims are to: (i) display the multidimensional learning curve of totally laparoscopic distal gastrectomy, and (ii) verify the feasibility of totally laparoscopic distal gastrectomy after learning curve completion by comparing it with laparoscopy-assisted distal gastrectomy. Materials and Methods: From January 2005 to June 2012, 247 patients who underwent laparoscopy-assisted distal gastrectomy (n=136) and totally laparoscopic distal gastrectomy (n=111) for early gastric cancer were enrolled. Their clinicopathological characteristics and early surgical outcomes were analyzed. Analysis of the totally laparoscopic distal gastrectomy learning curve was conducted using the moving average method and the cumulative sum method on 180 patients who underwent totally laparoscopic distal gastrectomy. Results: Our study indicated that experience with 40 and 20 totally laparoscopic distal gastrectomy cases, is required in order to achieve optimum proficiency by two surgeons. There were no remarkable differences in the clinicopathological characteristics between laparoscopy-assisted distal gastrectomy and totally laparoscopic distal gastrectomy groups. The two groups were comparable in terms of open conversion, combined resection, morbidities, reoperation rate, hospital stay and time to first flatus (P>0.05). However, totally laparoscopic distal gastrectomy had a significantly shorter mean operation time than laparoscopy-assisted distal gastrectomy (P<0.01). We also found that intra-abdominal abscess and overall complication rates were significantly higher before the learning curve than after the learning curve (P<0.05). Conclusions: Experience with 20~40 cases of totally laparoscopic distal gastrectomy is required to complete the learning curve. The use of totally laparoscopic distal gastrectomy after learning curve completion is a feasible and timesaving method compared to laparoscopy-assisted distal gastrectomy.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.2
• /
• pp.105-111
• /
• 2002

To find out the optimum nitrogen fertilization levels for the leafy vegetables in volcanic ash soils of Cheju island, fertilization effects on chinese cabbage chinese and cabbage were investigated through pot and field experiments. In pot experiment conducted with two volcanic ash soils of Cheju island, optimum rates of nitrogen fertilizer was ranged from 294 to $331kg\;ha^{-1}$ for chinese cabbage. At field experiment with one volcanic soil, the optimum N fertilizer was $331kg\;ha^{-1}$. On the basis of soil organic matters, fertilizer recommendation formula for cabbage, could be established by using 1.03 of comparison factors (F) compared with chinese cabbage : y=344.54-0.285x for chines cabbage, y= 354.88-0.294x for cabbage, where y is the recommendation amount of nitrogen fertilizer with x g $kg^{-1}$ of organic matter in soil. Actual optimum rate of nitrogen fertilizer for chinese cabbage under field condition was much more similar to the value caluculated by the revised nitrogen recommendation formula than the amount of nitrogen fertilizer recommended by the current formula in volcanic ash soil.

• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.1013-1023
• /
• 2003

This study was performed to improve water quality of stream by applying hydraulic structures (weir and river bed material) made of porous concrete. The physical and chemical characteristics of porous concrete were measured to estimate application possibility of it in hydraulic structures and it was considered as a proper material for the hydraulic structures. In the results of comparison for the component of matters attached on the hydraulic structures made of porous and ordinary concrete, DW (dry weight) amount attached on porous concrete was 1.6 times higher than that on ordinary concrete under the condition of the same flow rate but influence by flow rate (difference of 10 times) was not shown. Therefore, we could understand that the material of media was more important in DW amount than flow rate. The rate of AFDM (ash free dry mass) to DW also was more at porous concrete than at ordinary concrete. Especially, the high rates of nitrogen and phosphorous in matters attached on porous concrete verify that they were removed by assimilation, adsorption and metabolism of periphyton. The removal percentage of SS, BOD, COD, T-N and T-P by hydraulic structures applying porous concrete compared with ordinary concrete was increased by 34.6%, 36.9%, 33.9%, 18.3% and 21.6%, respectively. Therefore, applying porous concrete to hydraulic structure is expected to contribute to improvement of stream water quality.

• Journal of Embryo Transfer
• /
• v.11 no.3
• /
• pp.249-258
• /
• 1996

To improve the efficiency of in vitro production of embryos with follicular oocytes in Korean Native cows, the recovery rates, in vitro maturation, fertilization and development, and the time required for collecting and processing oocytes by aspiration with or without slicing were evaluated comparatively. The ovaries were obtained from a local abattoir and placed in physiological saline at 25~28$^{\circ}C$ and brought to the laboratory within 3 hrs. The oocytes were collected by aspiration of follicles(2~6mm) with or without slicing ovaries after aspiration, and classified into Grade I, Grade II, Denuded, Expanded oocytes by the morphology of cumulus cells attached and the homogeneity of cytoplasmic granules. Also the time required for each step of collecting and processing oocytes were measured. The cumulus cells were removed in some Grade I oocytes to measure their size and nuclear configuration before and after in vitro maturation. The Grade I oocytes were matured in vitro(IVM) for 24 hrs. in TGM-199 supplemented with 35$\mu$g /ml FSH, 10$\mu$g /ml LH, 1 $\mu$g /ml at 39$^{\circ}C$ under 5% C02 in air. They were fertilized in vitro(IVF) by epididymal spermatozoa treated with heparin for 24hrs. and then the zygotes were cocultured in vitro (IVC) with bovine oviductal epithelial cells for 10 days. The results obtained were as follows: The number of oocytes recovered per ovary was averaged 6.6 by aspiration and 11.2 by slicing post aspiration, which summed to 17.8. The number of Grade I oocytes recovered per ovary was averaged 3.1 by aspiration and 3.6 by slicing, which summed to 6.7. The percentage of Grade I to total oocytes recovered was significantly(P<0.05) higher as 48.0 % in aspiration than 31.6% in slicing post aspiration. The time requlred for recovering a Grade I oocyte by aspiration and slicing was 1.1 and 2.5 min, respectively. The mean diameter of Grade I oocytes by aspiration and slicing was similar as 148.7 and 151.5$\mu$m, respectively. The percentage of Metaphase II stage oocytes after IVM for 24 hours was significantly (P

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.2
• /
• pp.257-263
• /
• 1999

It is well known that discard of seminal plasma from the semen and separation of motile sperm should be preceded before insemination for IUI or IVF. Till now, more than ten kinds of semen treatment methods have been developed. Of those, swim-up and Percoll methods have been used widely in ART laboratories as a routine semen treatment methods because of its advantages. However, there are reports that Percoll can make a genetic trouble because of its chemical structure and therefore the necessity has been arisen to substitute Percoll for other equivalent materials. This study was performed to evaluate the effects of three different sperm preparation methods (swim-up, Percoll and Sil-Select) on sperm motility, sperm recovery rate and fertilization rate. Also, the feasibility of using Sil-Select instead of Percoll in ART was evaluated. Each semen samples were divided into three fractions and motile sperm were recovered by swim-up, Percoll and Sil-Select gradient centrifugation methods. Normal and sub-normal criteria of fifteen semen samples and seventeen IVF cycles were included in these study. As results, no significant difference was found in sperm recovery rate in normal semen treated by a Swim-up, Percoll and Sil-Select method ($13.2{\times}10^6,\;17.5{\times}10^6\;and\;17.7{\times}10^6$ respectively). The initial sperm motility was 61.9% and this increased to 87.1%, 92.6% and 89.5% through Swim-up, Percoll and Sil-Select treatment, respectively. Higher motility was observed in Percoll and Sil-Select treated groups (81.5%, 79.2%, respectively) than swim-up group (66.8%) after incubation for 24hrs. In sub-normal group, sperm recovery rates were higher in Sil-Select group $(2.9{\times}10^6)$ than Percoll gradients group $(1.8{\times}10^6)$. In IVF cycles, the outcomes of fertilization using sperm treated by swim-up and Sil-Select group were similar (82.2%, 79.7% respectively). In conclusion, our results indicate that Sil-Select can be used as a substitute material for sperm preparation instead of Percoll.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.102-112
• /
• 2008

The main purpose of this study is to provide informations by comparing and analyzing tariff structures for the upcoming FTA negotiation between Korea and China. China is the biggest trade partner of Korea, sharing 33% of total trade value of forest products. However, import takes majority of trade value and it grows constantly. The results of FTA negotiation may have large impacts on Korean forest industry. The conclusions indicate that China subdivides items more complicatedly, and impose lower tariffs on forest products except stone than Korea. Besides, China has tariff escalation system that imposes lower duties on raw material than the manufactured, and also charges different rates of tariff on items of the same heading number according to the degrees of manufacturing. Furthermore, Korea imposes adjustment duties and didn't grant concessions on plywood and board items for protection of domestic industries, however, China already made concessions on all items. As a result of this, it will be unavoidable for Korea to increase import value from China, and tariff removal will have more negative impacts on Korea than China.