• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.11B no.4
• /
• pp.129-136
• /
• 2001

In order to evaluate the dielectric recovery strength for GCBs, two equations have been usually utilized. One is the empirical formula obtained from a series of tests and the other is the theoretical formula obtained from the streamer theory. In this paper, both methods were applied to predict the small capacitive current interruption capability of model circuit breakers and were investigated in terms of the reliability by comparing the simulation results with test ones.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.611-616
• /
• 2001

This paper analyzed PFC of active clamp ZVS flyback converter by adding two methods PFC (power Factor Correction) circuit - two-stage and single-stage. The addition of active clamp circuit also provides a mechanism for achieving ZVS of both the primary and auxiliary switches. ZVS also limits the turn off di/dt of the output rectifier, reducing rectifier-switching loss and switching noise, due to diode reverse recovery. As a result, the proposed converters have characteristics of the reduced switching noise and high efficiency in comparison to conventional flyback converter. The simulation and experimental results show that the proposed converter improve the input PF of 300W ZVS flyback converter by adding single-stage, two-stage PFC circuit.

• Journal of electromagnetic engineering and science
• /
• v.5 no.2
• /
• pp.97-103
• /
• 2005

This paper describes the measured results of sonobuoy transmitting antenna system for anti-submarine warfare (ASW). Since radiation pattern and power density depend on impedance matching between transmitting RF part and antenna with termination resistance, design of matching circuit is very important for sonobuoy system performance. Matching circuit is designed by Smith chart using control of L and C. In standing wave ratio(SWR) measurement using Network Analyzer, SWR of antenna with matching circuit observed 1.5 below at the assigned VHF band. It shows very excellent performance comparison with conversional product that is used for the same object. The measured vertical and horizontal radiation patterns are also shown the satisfaction of military specifications. A drop out of sonobuoy system on the sea is happened when angle of elevation direction is over 10 degrees, and it is conformed that it takes less than I second return to original signal level. The required electric power density is $83\;mW/m^2$ in the military specification, and measured electric power density is observed over average $110\;mW/m^2$ at all frequency bands.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.1
• /
• pp.44-47
• /
• 2003

There are several simulation programs in studying superconductor RSFQ (Rapid Single flux Quantum) electronic devices, which include WRspice, WinS, PSCAN, and JSIM. Even though different research groups use different simulation programs, it is not well known about which program gives the simulation results closer to the measurement values. In this work, we used both WRspice and WinS to simulate RSFQ OR gate and to compare the results from the different simulations. This comparison would help in deciding which program is better in the RSFQ circuit design. In the confluence buffer, which is the one of the main components of the DR gate, the measured bias margins were ${\times}23.2%$, while the margins from the simulations were ${\pm}35.56%$ from WRspice and it 53.1% from WinS. However, with the actual fabricated circuit parameters WRspice gave ${\pm}27%$. In WinS the circuit did not operate. We concluded that WRspice is more reliable.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.3
• /
• pp.133-137
• /
• 2011

The purpose of smart grid is the low $CO_2$ through expansion of renewable energy. To achieve the purpose of smart grid, typical radial power distribution system will be changed to loop power distribution system. The loop power distribution system have many advantages such as low power loss, low voltage drop, and increase of connection of renewable energy. In this paper, the algorithm for minimization of interrupted section of power distribution system is proposed through communication between circuit breaker and recloser in loop power distribution system. The proposed algorithm is proved through case studies about reliability evaluation

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.393-396
• /
• 2004

This paper proposed a transfer function of a frequency-controlled resonant inverter for output power control. The inverter is modeled as an equivalent circuit by using Phasor transformation. A transfer function is derived from the equivalent circuit which contains cross-coupled nonlinear parts. By simulation of the circuit, the transfer function can be approximated as a linear first-order function. The proposed transfer function is verified through comparison of experimental and simulation results.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.403-405
• /
• 2008

This paper proposes an output inductor-less active clamp forward converter employing current boost-up circuit for high power density adaptor. By applying the proposed current boost-up circuit, the proposed converter has low conduction loss and low voltage ringing of the secondary rectifier. This paper presents the analysis of the proposed converter and a comparison between the proposed converter and the conventional converter through experiment.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.375-377
• /
• 2006

A Analog parallel processing-based Viterbi decoder which decodes PRML signal of DVD has been designed by CMOS circuit. The analog processing-based Viterbi decoder implements are functions of the conventional digital Viterbi decoder utilizing the analog parallel processing circuit technology. The Analog parallel processing-based Viterbi decoding technology is applied for the PR(1,2,2,1) signal decoding of DVD. The benefits are low power consumption and less silicon consumption. In this paper, the comparison of the Analog parallel processing-based Viterbi Decoder which has a function of the error correction between Max operation and Average operation is discussed.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.237-239
• /
• 2006

The residual flux(${\psi}_r$) in transformer's iron cores cause the distortion of short-circuit current occasionally. And some considerable distortion effect on the validation of test results. To prevent this situation, there needs some suitable control of residual flux through the pretest. This paper deals with the how to control the residual flux in pretest and the comparison between the two test results which were obtained by different test method.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.10
• /
• pp.59-66
• /
• 1997

Neural networks has widely been be used for several practical applications such as speech, image processing, and pattern recognition. Thus, a approach to the voltage-controlled current source in areas of neural networks, the key features of CNN in locally connected only to its netighbors. Because the architecture of the interconnection elements between cells in very simple and space invariant, CNNs are suitable for VLSI implementation. In this paper, processing element of digital programmable CNN with variable template memory was implemented using CMOS circuit. CNN PE circuit was designe dto control gain for obtaining the optimal solutions in the CNN output. Performance of operation for 4*4 CNN circuit applied for fixed template and variable template analyzed with the result of simulation using HSPICE tool. As a result of simulations, the proposed variable template method verified to improve performance of operation in comparison with the fixed template method.