• Journal of Veterinary Clinics
• /
• v.30 no.3
• /
• pp.166-171
• /
• 2013

This study was conducted to evaluate the clinical relevance and effectiveness of ovariectomy (OVE) and ovariohysterectomy (OVH) in terms of postoperative pain behavior and surgical stress. Thirteen healthy intact mongrel purpose-bred female dogs were used in this study. OVE was performed in six dogs whereas OVH was performed in seven dogs. Prior to, 1, 2, 4, 6, 12, and 24 h after surgery, pain assessment was performed by using the Short form of Composite Measure Pain Scale (CMPS-SF) and blood analysis for the determination of glucose, creatine kinase (CK), and cortisol were done. Also, surgical time, duration of anesthesia, and incision length were compared between two groups. As a result, OVH group as opposed to OVE group showed significantly longer in surgical time, duration of anesthesia, and incision length. Also, based on the two-way ANOVA test, the CMPS-SF had significant differences (p < 0.05) between two groups, with the OVE dogs having lower values at 1, 2, 4, and 6 h postoperatively. In addition, in terms of CK, the value at 1, 2, 4, 6, and 12 h were significantly (p < 0.05) increased from the baseline value for the OVH group. However, as for CK in OVE group, the values at 4, 6, and 12 h were significantly increased from the baseline value. As for blood glucose, a significant (p < 0.05) increase from the baseline was shown at 1 h postoperatively in OVH group and no significant increase was shown in OVE group. In terms of serum cortisol level, the values at the 1 and 2 h were significantly (p < 0.05) increased from the baseline value for both groups. In conclusion, our study has shown that OVE can be considered as a superior choice in terms of sterilization technique in female dogs, considering shorter incision length, surgical time, duration of anesthesia along with lower pain and surgical stress response than OVH.

• Journal of Gifted/Talented Education
• /
• v.18 no.3
• /
• pp.569-589
• /
• 2008

One of the main factors that affect the improvement of G/T education is the number and the level of quality of the professionals who are working for the gifted. The professionals vary depending on the role they play for the gifted from the classroom teacher, coordinator, to consultant. Since the legislation of the law for the enhancement of the gifted education in Korea, the in-service training for the classroom teacher has been expanded in number throughout the country. Nowadays, the gifted education is about to be expanded into the general school population, and it becomes more necessary that the training at the level of university graduate program be expanded beyond the short-term in-service training so far. In this vein, the number of universities in Korea that offer the staff development for the gifted education at the graduate level has been increased. However, the problem is whether those programs meet the need to produce the quality professionals. Based on this problem awareness, the study analyzed the graduate programs of 8 universities in Korea by comparing their course descriptions with the graduate-level training program standards of the United States and Europe. It was found that most of the universities fulfilled the areas that both standards commonly consider import, such as "concept and development of giftedness", "curriculum development for the gifted", "teaching methods for the gifted." However, the number of the offered subjects was different among the universities, which indicates that it is suspicious that the universities equally satisfy the areas both standards require. Furthermore, it was also found that the universities differ in satisfying the other standards, From these findings, several suggestions were made for the improvement of the university graduate programs in Korea.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.157-165
• /
• 2015

Purpose: To evaluate changes in central and peripheral refraction along the horizontal visual fields in myopic corneal refractive surgery group compared with emmetropes. Methods: One hundred twenty eyes of 60 subjects ($23.56{\pm}2.54$ years, range: 20 to 29) who underwent myopic refractive surgery and 40 eyes of 20 emmetropes ($22.50{\pm}1.74$ years, range: 20 to 25) were enrolled. The central and peripheral refractions were measured along the horizontal meridianat $5^{\circ}$, $10^{\circ}$, $15^{\circ}$, $20^{\circ}$, $25^{\circ}$ in the nasal and temporal areas using an open-field autorefractor. For analysis of post-op group, the group was classified by pre-op spherical equivalents of < -6.00 D and ${\geq}-6.00D$ as two post-op groups. Results: Pre-op spherical equivalent was $-4.56{\pm}0.92D$ (rang: -2.50 to -5.58 D) in post-op group 1, and $-7.09{\pm}0.96D$ (rang: -6.00 to -9.00 D) in post-op group 2. Spherical equivalent (M) in the emmetropes ranged from $-0.20{\pm}0.22D$ at center to $-0.64{\pm}0.83D$ at $25^{\circ}$ in the temporal visual field and to $-0.20{\pm}0.67D$ at $25^{\circ}$ in the nasal visual field; M in post-op group 1 ranged from $-0.16{\pm}0.29D$ at center to $-5.29{\pm}1.82D$ at $25^{\circ}$ in the temporal visual field and to $-4.48{\pm}1.88D$ at $25^{\circ}$ in the nasal visual field; M in post-op group 2 ranged from $-0.20{\pm}0.32D$ at center to $-7.98{\pm}2.08D$ at $25^{\circ}$ in the temporal visual field and to $-7.90{\pm}2.26D$ at $25^{\circ}$ in the nasal visual field. Among the three groups, there was no significant difference in M at central visual field (p=0.600) and at $5^{\circ}$ in the temporal visual field (p=0.647), whereas, there was significant difference in M at paracentral and peripheral visual field (p=0.000). Conclusions: Emmetropes had relatively constant refractive errors throughout the central and peripheral visual field and showed myopic peripheral defocus along the horizontal visual field. On the other hand, in myopic corneal refractive surgery group, there were significant differences in refractive errors between the central and peripheral visual field compared with differences in the central and peripheral refraction patterns of emmetropes.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1016-1023
• /
• 2006

The water content of dewatered cake produced from belt press dewatering equipment was about 75 wt% which was some high to handle it, so the equipment contained a limit at the economical and environmental aspect. The thermal dewatering equipment built as an alternative to overcome several problems was set up at the sludge treatment field and estimated some feasibility as comparison with the dewatering performance of belt press. First, dewatering properties of waterworks sludge was analyzed by monthly. The sludge of a water shortage season contained a high organic content which led to be difficult to dewater the cake, the other side the sludge of rainwater season was ease to dewater because of low organic content. According to the results to analysis the water content of dewatered cake produced from two equipments on the base of the seasonal dewatering properties, the water content of dewatered cake produced from thermal dewatering for sludge of water shortage season was $41.6{\sim}48.3$ wt% and $71{\sim}84$ wt% from belt press. In the case of rainwater season, the water content of dewatered cake produced from thermal dewatering was $34{\sim}37.7$ wt% and $57{\sim}70$ wt% from belt press. It was understood that thereduction of water content of cake by thermal dewatering was larger than belt press. The economical aspect for two equipments was evaluated on considering the reduction of cake treatment amount as the decrease of water content of cake. When putting the cost index of thermal dewatering into 100, belt press was 121. This meant that thermal dewater was more economical than belt press by about 20% in the side of construction and operation. In conclusion, thermal dewatering equipment was estimated by producing the low water content dewatered cake as well as being operated with low coat.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.4
• /
• pp.222-224
• /
• 1975

Three strains of common carp, i. e. , Israeli carp, red-and-white, and golden strains, were stocked in the same pond, and their growth rates were compared with following results: From August 12 to November 21 in 1975, fingerlings of the three strains of common carp, Cyprinus carpo, each weighing about 0.5 g with total length of 2 to 3 cm, were stocked. The pond had an area of $316m^2$ with a mean water depth of 55cm, and the bottom was covered with a 20 to 30 cm thick layer of silt containing a considerable amount of decaying organic materials. Feed given was prepared with equal amounts of fish meal and polished barley, of which, in addition, $10\%$ green grass and $1\%$ table salt were mixed together when prepared into paste feed using a chopper after boiling the barley. Total protein content of the feed was $34.9\%$ in dry state with $5\%$ moisture content. Total feed given was 30.08 kg calculated in dry state to produce 20.588 kg of the common carp fingerlings, thus the feed coefficient being 1.51. By strains, the harvested Israeli carp ranged 98 to 311g each with a mean weight of $172.69g(100\%)$, red-and-white strain 15 to 318g with mean of $104.1g(60.3\%)$, and the golden strain 30 to 268g with mean of $128.7g(74.6\%)$. During the rearing season mean water temperature was $23.9^{\circ}C$ and the assumed main growth period with the water temperature above $15^{\circ}C$ was, upto the end of October, for 80 days with a mean water temperature of $23.9^{\circ}C$. Taking this main growth period as the basis for growth rate analysis, the mean daily increments, expressed as the attained body weight in times of the starting weight, become 1.075786 times (or the Israeli strain, 1.06901 times for the red-and-white strain, and 1.07185 times for the golden strain.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.477-484
• /
• 2006

The purposes of this study were to compare the apical terminus width of simulated curved root canal prepared with three NiTi file systems used by undergraduates for evaluation the effects of flute angle and pitch or radial land on reducing screw-in effect and to determine more safe NiTi file system for inexperienced operators. Fifty inexperienced undergraduate students prepared 150 simulated curved root canals in resin blocks with three NiTi file systems ; ProFile$^{(R)}$, Hero Shaper$^{(R)}$, K3$^{TM}$. The electric motor set at a speed of 300 rpm and torque of 30 in a 16 : 1 reduction handpiece was used. The simulated root canal was prepared to ISO #25 sizes with each file system. The scanned images of pre- and post-instrumented canal of resin block were superimposed. To evaluate the screw-in effect of three NiTi file systems, apical terminus width of root canal was measured from superimposed images and statistical analysis was performed. There were significant differences in three NiTi flle systems. ProFile$^{(R)}$ had significantly smaller width than Hero Shaper$^{(R)}$ and K3$^{TM}$"" (P < 0.05), but no significant difference was observed between K3$^{TM}$ and Hero Shaper$^{(R)}$. Under the condition of this study, active file system (Hero SHaper$^{(R)}$, K3$^{TM}$) with variable pitch and helical angle had more screw-in effect than passive file system (ProFile$^{(R)}$) with constant pitch and helical angle. It seems that the radial lands play more important role in reducing screw-in effect.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.762-769
• /
• 2002

As a preliminary test for defining intact yellow croaker pigment, the pigment was analyzed by column chromatography and UV-vis spectrophotometry. All maximum absorbance wavelengths commonly showed three maximum absorbance ranges, similar to those of carotenoid, suggesting that the tested pigment may be carotenoid. We detected total six peak RT values in the chromatogram through PDA-HPLC under gradient mode (behavior A at 10% for initial 2 min and changed to behavior B for 60 min). Most pigments were detected at the peak with 3.27 RT value. Because seven peaks were detected under gradient mode and three under isocratic mode [methanol : methylene chloride (90 : 10, v/v)], gradient mode was determined to be more appropriate for quantitative analysis. By the comparison test of RT values among yellow pigment in croakers and reference pigments, such as zeaxanthine, ${\beta}-cryptoxanthine$, ${\beta}-carotene$, and astaxanthin, only ${\beta}-cryptoxanthine$ was detected in the white croaker, whereas such pigment of yellow croaker having RT value of 31.02 was not detected. Therefore, RT value was found to be applicable for detecting adulterated croaker.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.3
• /
• pp.115-120
• /
• 2016

$CeO_2$ is used as a co-catalyst with $TiO_2$ to improve the catalytic activity of $MnO_x$ and characterization of nano-sized powder is identified with de-NOx efficiency. A comparison between $MnO_x-CeO_2/TiO_2$ and single $CeO_2$ was conducted in terms of microstructural analysis to observe the behavior of $CeO_2$ in the ternary catalyst. The $MnO_x-CeO_2/TiO_2$ catalyst was synthesized by sol-gel method and the average particle size of the single $CeO_2$ is about $285{\mu}m$ due to the low thermal stability, whereas the particle size $MnO_x-CeO_2/TiO_2$ is about 130 nm. The strong interaction between Ce and Ti was identified through the EDS mapping by transmission electron microscopy (TEM). The improvement about 20 % of $de-NO_x$ efficiency is observed in the low-temperature ($150^{\circ}C{\sim}250^{\circ}C$) and vigorous oxygen exchange by well-dispersed $CeO_2$ is the reason of catalytic activity improvement.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.293-303
• /
• 2012

Recently, as construction technology improved, concrete structures not only became larger, taller and longer but were able to perform various functions. However, if extreme loads such as impact, blast, and fire are applied to those structures, it would cause severe property damages and human casualties. Especially, the structural responses from extreme loading are totally different than that from quasi-static loading, because large pressure is applied to structures from mass acceleration effect of impact and blast loads. Therefore, the strain rate effect and damage levels should be considered when concrete structure is designed. In this study, the low velocity impact loading test of steel fiber reinforced concrete (SFRC) slabs including 0%~1.5% (by volume) of steel fibers, and strengthened with two types of FRP sheets was performed to develop an impact resistant structural member. From the test results, the maximum impact load, dissipated energy and the number of drop to failure increased, whereas the maximum displacement and support rotation were reduced by strengthening SFRC slab with FRP sheets in tensile zone. The test results showed that the impact resistance of concrete slab can be substantially improved by externally strengthening using FRP sheets. This result can be used in designing of primary facilities exposed to such extreme loads. The dynamic responses of SFRC slab strengthened with FRP sheets under low velocity impact load were also analyzed using LS-DYNA, a finite element analysis program with an explicit time integration scheme. The comparison of test and analytical results showed that they were within 5% of error with respect to maximum displacements.

• Journal of Oral Medicine and Pain
• /
• v.31 no.4
• /
• pp.355-364
• /
• 2006

Headache is a common disease which influences not only individually but also socially. Temporomandibular disorders(TMD) refers to pain and dysfunction within the temporomandibular joint(TMJ) and associated muscles. TMD is presented commonly, and 70% of population are found to have one or more related symptom. A number of studies have been conducted to verify the association between headache and TMD, and some authors have proposed that headache and TMD may be related. In this study, we studied the patterns of headache presented by the patients who visited the TMJ and Orofacial pain clinic. Among the patients participated in this study, tension type headache showed the highest prevalence(48.5%), followed by migraine without aura(15.0%), probable migraine(10.6%), migraine with aura(7.1%), probable tension type headache(4.8%), and other primary headaches(1.8%). The high prevalence of tension type headache may be due to the accompaniment of orofacial pain by pericranial muscle tenderness. Comparison of sex showed that the rate of migraine was higher in female than male(female to male ratio 35.8:25.3). In age analysis, the rate of migraine was high in the twenties(42.2%) and the thirties(40.0%). As the age increased, the rate of migraine decreased, and this trend was in accordance with the previous studies. The percentage of the patients who had previously received treatment was only 26.2%, and that of those who were aware of the diagnosis was merely 8.7%. Therefore, it is not common for headache patients to get treatment, however, since orofacial pain is often accompanied by headache, more systematic diagnosis as well as precise treatment would be necessary. Moreover, since TMD could induce and aggravate headache, proper evaluation and management of TMD would be essential for diagnosis and treatment of headache. In the future, more systematic and broad investigation on the influence of causative factors of TMD on headache as well as the change in headache pattern with the treatment of TMD would be required.