• Clinical and Experimental Pediatrics
• /
• v.52 no.2
• /
• pp.199-204
• /
• 2009

Purpose : Seizure associated with fever may indicate the presence of underlying inherited metabolic diseases. The present study was performed to investigate the presence of underlying metabolic diseases in patients with complex febrile seizures, using analyses of urine organic acids. Method : We retrospectively analyzed and compared the results of urine organic acid analysis with routine laboratory findings in 278 patients referred for complex febrile seizure. Results : Of 278 patients, 132 had no abnormal laboratory findings, and 146 patients had at least one of the following abnormal laboratory findings: acidosis (n=58), hyperammonemia (n=55), hypoglycemia (n=21), ketosis (n=12). Twenty-six (19.7 %) of the 132 patients with no abnormal findings and 104 (71.2%) of the 146 patients with statistically significant abnormalities showed abnormalities on the organic acid analysis (P<0.05). Mitochondrial respiratory chain disorders (n=23) were the most common diseases found in the normal routine laboratory group, followed by PDH deficiency (n=2) and ketolytic defect (n=1). In the abnormal routine laboratory group, mitochondrial respiratory chain disorder (n=29) was the most common disease, followed by ketolytic defects (n=27), PDH deficiency (n=9), glutaric aciduria type II (n=9), 3-methylglutaconic aciduria type III (n=6), biotinidase deficiency (n=5), propionic acidemia (n=4), methylmalonic acidemia (n=2), 3-hydroxyisobutyric aciduria (n=2), orotic aciduria (n=2), fatty acid oxidation disorders (n=2), 2-methylbranched chain acyl CoA dehydrogenase deficiency (n=2), 3-methylglutaconic aciduria type I (n=1), maple syrup urine disease (n=1), isovaleric acidemia (n=1), HMG-CoA lyase deficiency (n=1), L-2-hydroxyglutaric aciduria (n=1), and pyruvate carboxylase deficiency (n=1). Conclusion : These findings suggest that urine organic acid analysis should be performed in all patients with complex febrile seizure and other risk factors for early detection of inherited metabolic diseases.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.1
• /
• pp.39-43
• /
• 2012

Purpose: In hospital image-guided radiation therapy in patients with bladder cancer to enhance the reproducibility of the appropriate amount, depending on the patient's condition, and image-guided injection of saline system (On-Board Imager system, OBI, VARIAN, USA) three of the Cone-Beam CT dimensional matching (3D-3D matching) to be the treatment. In this study, the treatment of patients with bladder cancer at Cone-Beam CT image obtained through the analysis of the bones based matching and matching based on the bladder to learn about the differences, the bladder's volume change injected saline solution by looking at the bladder for the treatment of patients with a more appropriate image matching is to assess how the discussion. Materials and Methods: At our hospital from January 2009 to April 2010 admitted for radiation therapy patients, 7 patients with bladder cancer using a Folly catheter of residual urine in the bladder after removing the amount determined according to individual patient enough to inject saline CT-Sim was designed after the treatment plan. After that, using OBI before treatment to confirm position with Cone-Beam CT scan was physician in charge of matching was performed in all patients. CBCT images using a total of 45 bones, bladder, based on image matching and image matching based on the difference were analyzed. In addition, changes in bladder volume of Eclipse (version 8.0, VARIAN, USA) persuaded through. Results: Bones, one based image matching based on the bladder and re-matching the X axis is the difference between the average $3{\pm}2mm$, Y axis, $1.8{\pm}1.3mm$, Z-axis travel distance is $2.3{\pm}1.7mm$ and the overall $4.8{\pm}2.0mm$, respectively. The volume of the bladder compared to the baseline showed a difference of $4.03{\pm}3.97%$. Conclusion: Anatomical location and nature of the bladder due to internal movement of the bones, even after matching with the image of the bladder occurred in different locations. In addition, the volume of saline-filled bladder showed up the difference between the 4.03 percent, but matched in both images to be included in the planned volumes were able to confirm. Thus, after injection of saline into the bladder base by providing a more accurate image matching will be able to conduct therapy.

• Progress in Medical Physics
• /
• v.23 no.1
• /
• pp.48-53
• /
• 2012

The pencil beam convolution (PBC) algorithms in radiation treatment planning system have been widely used to calculate the radiation dose. A new photon dose calculation algorithm, referred to as the anisotropic analytical algorithm (AAA), was released for use by the Varian medical system. The aim of this paper was to investigate the difference in dose calculation between the AAA and PBC algorithm using the intensity modulated radiation therapy (IMRT) plan for lung cancer cases that were inhomogeneous in the low density. We quantitatively analyzed the differences in dose using the eclipse planning system (Varian Medical System, Palo Alto, CA) and I'mRT matirxx (IBA, Schwarzenbruck, Germany) equipment to compare the gamma evaluation. 11 patients with lung cancer at various sites were used in this study. We also used the TLD-100 (LiF) to measure the differences in dose between the calculated dose and measured dose in the Alderson Rando phantom. The maximum, mean, minimum dose for the normal tissue did not change significantly. But the volume of the PTV covered by the 95% isodose curve was decreased by 6% in the lung due to the difference in the algorithms. The difference dose between the calculated dose by the PBC algorithms and AAA algorithms and the measured dose with TLD-100 (LiF) in the Alderson Rando phantom was -4.6% and -2.7% respectively. Based on the results of this study, the treatment plan calculated using the AAA algorithms is more accurate in lung sites with a low density when compared to the treatment plan calculated using the PBC algorithms.

• Journal of Radiation Protection and Research
• /
• v.38 no.2
• /
• pp.106-118
• /
• 2013

In this paper, we analyzed the Cognition of irradiated food and its relation with self-efficacy. The most important variables described behaviors based on health choices compared with the choice to choose irradiated food items. According to the survey, 33.1% of respondents said that the reason why irradiated food is considered to be a health risk is because "radiation is dangerous". 27.9% of respondents answered that "eating irradiated food is like eating a radioactive substance", 21.1% said radiated food is comparable to a "genetic variation in food" while 10.1% said "food goes bad during the irradiation process". On this basis, it is reasonable to conclude that respondents have a misunderstanding of irradiated food without reference to the general theory of irradiated knowledge. In this respect, it would be helpful to provide education showing that irradiated food is not related to eating harmful or genetically modified food to help high school students create informed opinions of irradiated food. In terms of relevance with health-specific self-efficacy, experience of acquiring information about irradiated food was marked at r=0.148 (p<0.01), experience of purchasing irradiated food was marked at r=0.077 (p<0.05), experience of eating irradiated food was marked at r=0.113 (p<0.01) while knowledge of irradiated food, attitude towards irradiated food and behavior was marked at r=0.103 (p<0.01), r=0.076 (p<0.05) and r=0.105 (p<0.01) respectively. This shows that self-efficacy is high when one has experience of acquiring information about irradiated food, purchasing or eating irradiated food resulting in a high level of knowledge, attitude and behavior. Education which serves to improve the level of self-efficacy needs to be provided along with an educational program which will increase the public's understanding of irradiated food. It is expected that if this education which increases the level of self-efficacy is provided together with correct information of irradiated food, behavior to choose and eat irradiated food will also improve.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.113-120
• /
• 2014

This study will evaluate the effectiveness of various pretreatments when fiber-reinforced composite (FRC) post is bonded to endodontically treated tooth with resin cement. Materials and methods: Canal shaping of FRC post (DT Light post, Size 3, Bisco Inc., Schaumburg, IL, USA) was performed on endodontically treated premolars at 1.5 cm from CEJ. Samples were divided into 6 groups of surface treatment after conventional washing and drying to the canal. Total of 24 FRC posts were randomly divided into 6 groups of surface treatment as follows: Group C: control - no surface treatment, Group A: airborne-particle abrasion (Cojet sand, 3M ESPE), Group S: silanization (Bis-silane, Bisco Inc.), Group M: universal primer (Monobond-plus primer, Ivoclar Vivadent Inc.), Group AS: silanization after airborne-particle abrasion, Group AM: universal primer treatment after airborne-particle abrasion. Pretreated fiber posts were cemented with resin-based luting material and photo-polymerized and cut to the thickness of 1 mm. Push-out test using a universal testing machine was performed. Bonding failure strength of post dislodgement was measured and the type of bonding failure was classified. Data were analyzed with Kruskal-Wallis test and multiple comparison groups were performed using Tukey HSD value of rank test (${\alpha}=0.05$). Results: Group AS showed significantly highest bonding strength. Group S, group AM, group A, and group M showed lower bonding strength in order. The control group showed the lowest bonding strength. Conclusion: Surface treatment with silane showed to be the most effective of the surface pretreatment methods for cementation of FRC post. Surface treatment with universal primer showed no significant difference compared with no surface treatment group as for bonding strength.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.102-109
• /
• 2003

The purpose of this study was to evaluate the linear polymerization shrinkage(%) and microhardness of composite resin(Z-100, 3M, USA) according to 2-step light curing method. Conventional light curing unit(Curing Light 2500, 3M USA) and 2-step light curing unit(Elipar Highlight, ESPE, Germany) were used as light source. The strain gauge method was used for determination of polymerization shrinkage(%). Samples were divided by 3 groups according to light curing methods (Group I : $450mW/cm^2$, 40sec, Group II : $650mW/cm^2$, 40sec, Group III : $150mW/cm^2$, 10sec & $650mW/cm^2$, 30sec). Preparations of acrylic molds were followed by filling and curing. Strain gauges attached to each sample were connected to a strainmeter. Measurements were recorded at each second for the total of 10 minutes including the periods of light application. And microhardness of each group after 24hours from light irradiation were measured. Obtained data were analyzed statistically using Ore-way ANOVA and/or Scheffe test. The results of the present study can be summarized as follows: 1. Composite resin in acrylic molds showed the initial expansion at the early phase of polymerization. This was followed by the contraction with the rapid increase in volume during the first 60 seconds and gradually diminished as curing process continued. 2. The lowest linear polymerization shrinkage(%) was found in group III followed by group I, II during the measuring periods. 3. Group III using 2-step curing method showed statistically significant reduction of linear polymerization shrinkage(%) compared with group I, II at 1 minute and 10 minutes from light irradiation(p<0.05). 4. The microhardness values of each group not revealed significant difference.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.1
• /
• pp.21-30
• /
• 1985

The tension leg platform (TLP) is a kind of compliant structures, and is also a type of moored stable platform with a buoyancy exceeding the weight because of having tensioned vertical anchor cables. In this paper, among the various kinds of tension leg structures, Deep Oil Technology (DOT) TLP was analyzed because it has large-displacement portions of the immersed surface such as vertical corner pontoons and small-diameter elongated members such as cross-bracing. It also has results of hydraulic model tests, comparable with theorectical analysis. Because of the vertical axes of symmetry in the three vertical buoyant legs and because there are no larger horizontal buoyant members between these three vertical members, it was decided to develop a numerical algorithm which would predict the dynamic response of the DOT TLP using the previously developed numerical algorithm Floating Vessel Response Simulation (FVRS) for vertically axisymmetric bodies of revolution. In addition, a linearized hydroelastic Morison equation subroutine would be developed to account for the hydrodynamic pressure forces on the small member cross bracing. Interaction between the large buoyant members or small member cross bracings is considered to be negligible and is not included in the analysis. The dynamic response of the DOT TLP in the surge mode is compared with the results of the TLP algorithm for various combinations of diffraction and Morison forces and moments. The results which include the Morison equation are better than the results for diffraction only. This is because the vertically axisymmetric buoyant members are only marginally large enough to consider diffractions effects. The prototype TLP results are expected to be more inertially dominated.

• Clean Technology
• /
• v.22 no.1
• /
• pp.53-61
• /
• 2016

Steam reforming of tar produced from biomass gasification was conducted using several Ni-based catalysts. In labscale, the catalytic steam reforming of toluene which is a major component of biomass tar was studied. A fixed bed reactor was used at various temperatures of 400-800 ℃. Ru (0.6 wt%) and Mn or K (1 wt%) were applied as a promoter in Ni based catalysts. Generally, Ni/Ru-K/Al₂O₃ catalyst shows higher performance on steam reforming of toluene than Ni/Ru-Mn/Al₂O₃ catalyst. Used catalysts were analyzed by XRD and TGA to detect sintering and carbon deposition. Base on the lab-scale studies, the monolith and pellet type catalysts were tested in 1 ton/day scale biomass gasification system. Ni/Ru-K/Al₂O₃ monolith catalyst shows high tar reforming performance at high temperature. In addition, Ni/Ru-Mn/Al₂O₃ monolith catalyst was showed deactivation with operation time. Reforming performance of Ni/Ru-K/Al₂O₃ pellet catalyst which showed 66.7% tar conversion at 587 ℃ was compared to regenerated one. Overall, Ni/Ru-K/Al₂O₃ pellet catalyst shows higher stability and performance than other used catalysts.

• Korean Journal of Ecology and Environment
• /
• v.33 no.4 s.92
• /
• pp.374-379
• /
• 2000

To elucidate the degradation mechanisms of organic materials in Lake Paldang, oxygen consuming rates in the water column, high molecular weight (HMW) organic materials and aggregates were analyzed. Also the chlorophyll a concentrations and environmental factors were measured three times in 1999. The concentrations of chlorophyll a ranged $5.5{\sim}14.2\;mg/m^3$ with the highest peak of $57.7\;mg/m^3$ at the surface water in April. Chlorophyll a concentration of aggregates retrieved from traps in 5 m and 20 m depths in May were 2779.5, $9044.8\;mg/m^3$, respectively. Those vlaues were more than 6 times higher compared with other months, and more than 49 times higher than water column chlorophyll a. Oxygen consuming rates of water column were in the narrow range of $0.4{\sim}0.5\;mg\;O_2\;l^{-1}\;day^{-1}$. HMW organic materials were using only small amount of oxygen, $0.01{\sim}0.04\;mg\;O_2\;l^{-1}\;day^{-1}$. The aggregates retrieved from 5 m depth by sediment trap consumed the oxygen in the range of $0.48{\sim}0.69\;mg\;O_2\;l^{-1}\;day^{-1}$, while aggregates collected from 20 m depth, 0.88 to $1.04\;mg\;O_2\;l^{-1}\;day^{-1}$. With these results, the HMW appeared not to be degraded in the water column, instead they seemed to be concentrated and affected the sediment oxygen demand.

• Korean Journal of Organic Agriculture
• /
• v.23 no.4
• /
• pp.875-886
• /
• 2015

The upland soils (56 samples) from organic farms in Gyeonggi-do (12 sites), Gangwon-do (8 sites), Chungcheong-do (14 sites), Gyeongsang-do (4 sites), Jeollado (18 sites) in Korea were collected and their physical and chemical properties were analyzed by RDA's methods. In the results of physical property, the bulk density of soils averaged $1.14Mgm^{-3}$ (surface soil), $1.38Mgm^{-3}$ (subsoil), respectively. The porosity of them was 57%, 48%. Organically managed soil's (OS) bulk density was lower than conventional soil's but OS's porosity was a little higher than conventionally managed soil in surface soil. The depth of plough layer in organically managed soils was 21.2 cm indicating that the organic farming had good effect on soil physical property. In the results of chemical property, the surface soil pH was 6.9 and the contents of organic matter (OM) was $26gkg^{-1}$, available phosphate (Avail. $P_2O_5$) was $554mgkg^{-1}$, exchangeable calcium (Exch. Ca) was $8.9cmol_ckg^{-1}$, exchangeable potassium (Exch. K) was $0.89cmol_ckg^{-1}$, exchangeable magnesium (Exch. Mg) was $2.0cmol_ckg^{-1}$. The subsoil pH was 6.8 and the contents of OM was $21gkg^{-1}$, avail. $P_2O_5$ was $491mgkg^{-1}$, exch. Ca was $7.9cmol_ckg^{-1}$, exch. K was $0.68cmol_ckg^{-1}$, exch. Mg was $1.8cmol_ckg^{-1}$. The nutrient accumulation emerged in organic farming. Compared to the optimum nutrient range for the conventional upland soils, the exceed rate of pH, OM, available phosphate, and exchangeable Ca, K, and Mg was 79, 52, 64, 84, 66% and 55%, respectively, which mainly resulted from the over-application of lime materials or livestock manure compost. With these results it is suggested that organic farm need to reduce the use of inputs, which make soil alkalification or nutrient accumulation. More study on effects of inputs on lowering soil pH from alkalification could help organically managed soil to be improved.