• 전자공학회논문지B
• /
• 제28B권7호
• /
• pp.508-519
• /
• 1991

A new heuristic two-dimensional symbolic layout compaction approach is developed. After conventional one-dimensional compaction steps, all the components on the critical paths that define the height or width of the given layout are found and rearranged to reduce layout size. During this process, constraints in both x and y directions are considered and pitch-matching of ports for hierarchical compaction can be achieved to reduce the amount of the design data. This approach generated the smallest area for several examples we have tried when compared with other published results. The expected run time can be bouned by OT$_1$, where T$_1$ is the run time of a typical one-dimensional compactor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.781-783
• /
• 2000

In developing the assemble HEPA(High Efficiency Particulate Air) Filter, the main frame and sub frame can be easily assembled and disassembled and tightly sealed. The sub frame(included Media) will be made of the manageable material. so it will be easily compacted with the spent filter compactor. It does not take a lot of time for disassembling the spent filter. The main frame can be recycled and the volume of the spent filter is reduced, so the cost for treating the radioactive waste is reduce. And the changing costs can be reduced, because the cost of the media is lower than the filter.

• 아시안잔디학회지
• /
• 제7권1호
• /
• pp.13-18
• /
• 1993

Much attention has been given recently to solve the environmental contamination in golf courses Changing to culture practice rather than chemical practice that depends on pesticides and fertilizers is a hot issue in golf courses or grasslands. Organic soil conditioners improve soil-plant envirormental conditions rich in physical properties. In this study, measuring systems to evaluate soil conditioning effects were set up for on-site purpose. After establishing the methodology for evaluating soil conditioner effects, 2 kinds of organic conditioners were rested for examination. The systems for the methodology included a set of simulating equipment for field capacity, an impact type soil column compactor, and an infiltration-percolation system. Test results using the systems showed bulk density and infiltration rate of mixed soil were decreased at highter rates of conditioner, but total porocities were increased. Increased porocities were most capillary pore space which has a positive effect on soil water potential. The systems and methodology in this study seem to have an efficiency to measure the effects of soil conditioner on site purpose.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.193-194
• /
• 2021

Ti-salt agglomerated titanium dioxide photocatalyst from sludge, which has various and excellent functions such as nitrogen oxide removal performance, antifouling performance, and bacteria removal performance, is intended to be applied to UHPC. The UHPC used in this study is supposed to have a high compressive strength of 100~200MPa and a high flowability of 600mm or more with a slump flow. Titanium dioxide is fixed to the UHPC surface by sieving through a test sieve and compaction and painting using a vibration compactor, and this is tested according to ISO 22197-1. The NO removal amount is evaluated by classification the result range.

• Geomechanics and Engineering
• /
• 제29권5호
• /
• pp.583-598
• /
• 2022

The Compaction effect is important for evaluating the subgrade construction. However, there is little research exploring the compaction quality of deep soil using hydraulic compaction. According to reinforcement effect analysis, dimensional analysis is adopted in this work to analyze subgrade compactness within the effective reinforcement depth, and a prediction model is obtained. A hydraulic compactor is then employed to carry out an in-situ reinforcement test on gravel soil subgrade, and the subgrade parameters before and after reinforcement are analyzed. Results show that a reinforcement difference exists inside the subgrade, and the effective reinforcement depth is defined as increasing compactness to 90% in the depth direction. Layered compactness within the effective reinforcement depth is expressed by parameters including the drop distance of the rammer, peak acceleration, tamping times, subgrade settlement, and properties of rammer and filler. Finally, a field test is conducted to verify the results.

• 한국도로학회논문집
• /
• 제7권1호
• /
• pp.49-61
• /
• 2005

아스팔트 혼합물의 동탄성계수는 시험온도 하중주파수의 조합에 따라 각각의 동탄성계수값을 평가한다. 실험에서 얻어진 각각의 동탄성계수를 하중시간과 온도중첩원리를 이용하여 마스터곡선(Master Curve)을 결정한다. 본 연구의 주목적은 마스터곡선을 만들기 위해 필요한 3개의 다른 전이함수(Shift Factor)에 -즉, Arrhenius, 2002 AASHTO Guide, Experimental method- 따른 마스터곡선의 변화정도를 평가하는 것이다. 평가를 위해 사용된 골재는 화강암이고, 아스팔트(AP-3 및 AP-5)를 이용하여 표층용 및 기층용 아스팔트 혼합물의 동탄성계수를 평가하였다. 배합설계는 Superpave Level 1 기준을 준용하였고, 다짐은 선회다짐기를 이용하였다. UTM시험기를 이용한 동탄성계수 시험은 5개의 온도(-10, 5, 20, 40, 55도) 및 5개의 하중주파수(0.05, 0.1, 1, 10, 25 Hz)를 이용하였고, 각각의 아스팔트 혼합물의 위상각 및 동탄성계수를 평가하였다. 측정된 값을 이용하여 Sigmoidal Function방정식을 만족하는 입력변수를 결정하기 위해 전이함수 및 활성에너지 (activation energy)를 결정하였다.

• 한국도로학회논문집
• /
• 제6권2호
• /
• pp.1-13
• /
• 2004

본 논문은 정하중하에서 김테스트를 사용하여 아스팔트 콘크리트의 소성변형과 변형강도가 공시체에 크기에 미치는 영향에 대해 연구하였다. 2가지 골재(편마암, 화강암)와 6가지 아스팔트를 사용하여 총14개의 밀입도 혼합물을 사용하였다. 마샬 배합설계를 통해 최적아스팔트 함량을 구하고 결정된 최적아스팔트 함량으로 마샬공시체 (S=10cm)와 자이레토리 공시체(S=15cm)를 제작하여 마샬안정도시험, 휠트래킹시험, 개발된 김테스트(Kim test)를 수행하였다. SAS 분석을 통하여 공시체의 지름이 김테스트의 결과에 중요한 변수가 아닌 것을 알았으나 공시체의 두께는 $K_D$에 주용한 변수가 되는 것을 알았다. $K_D$값에 y값이 사용되어 영향을 미치는 것으로 판단되었다. 공시체의 두께를 6.6cm 이상으로 제작하여 김테스트에 적용 할때에는 마샬안정도에서와 같이 y 값에 따른 보정계수를 사용하거나 시험시 6.6cm 미만으로 제작하여야 할 것이다. 향후 보정계수 사용에 관한 연구도 가능할 것으로 판단된다.

• 대한토목학회논문집
• /
• 제26권3D호
• /
• pp.425-433
• /
• 2006

본 연구에서는 화강암 골재를 이용한 아스팔트 표층용 혼합물 및 기층용 혼합물의 동탄성계수를 평가하고, 배합설계에 사용된 데이터를 바탕으로 신뢰성이 높고, 간단한 형태의 동탄성계수 예측방정식을 개발하는 목표를 두고 있다. 기존의 마샬 배합설계가 아닌 슈퍼페이브 배합설계를 이용하여, 재료들의 기본 물성치를 정리하였다. 표층용(13mm 및 19mm)과 기층용(25mm) 밀입도 아스팔트 혼합물을 적용하였고, 국내의 대표적인 아스팔트 AP-3, AP-5 아스팔트 바인더를 이용하여 배합설계를 실시하였다. 최적아스팔트함량에 공극률 2%, 4%, 6%의 시편과 공극률 4%에 최적 아스팔트 함량에서 ${\pm}1%$의 아스팔트 함량을 이용하여 시편을 제작하였다. 5개의 다른 시험온도, -10, 5, 21, 40, $55^{\circ}C$ 및 0.05, 0.1, 1, 10, 25Hz의 5개의 하중주파수를 이용하여 일축압축 시험모드로 동탄성 계수를 평가하였다. 기존의 동탄성계수 예측용 Witczak 방정식을 표층용 및 기층용 아스팔트 혼합물 실험결과를 이용하여 국내 아스팔트 혼합물에 적용할 수 있는 수정된 예측방정식을 제안하였다. 예측방정식에 사용된 각각의 변수들에 의한 영향정도를 상호 비교 평가하였고, 제한된 실험 자료로 인해 예측방정식의 신뢰도는 약 80% 수준으로 평가되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1231-1238
• /
• 2010

Recently, the utilization of recycled aggregates for backfilling a power transmission pipeline trench has been increasing due to the issues of eco-friendly construction and shortage of natural aggregate resource. It is important to investigate the physical and thermal properties of the recycled aggregates that can be used as a backfill material. This study presents the thermal properties of two types of recycled aggregates with various particle size distributions. The thermal properties of the recycled aggregate were measured using the transient hot wire method and the probe method after performing the standard compaction test using an automatic compactor. Similar to silica sand, the thermal resistivity of the recycled aggregates decreased when the water content increased. This study shows that the recycled aggregate can be a promising backfill material substituting for natural aggregate when backfilling the power transmission pipeline trench.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.19-25
• /
• 2014

PURPOSES : This study was performed to evaluate the possibility of Indirect Tensile Strength (ITS) as a testing method that can predict cracking on pavement. METHODS : Three asphalt binders and one kind of aggregate were used in this study, and all asphalt mixtures were produced using Gyratory Compactor followed asphalt mix design. The ITS test was performed for the mixture which are artificially short-term aged using the oven. The ITS properties were analyzed by air void, compaction temperature, asphalt content, and asphalt binder. RESULTS : The results of this study indicated that (1) the compaction temperature did not show relationship with the ITS test; (2) there was no specific trend between the asphalt content and the ITS test; (3) the ITS could reveal the property of kinds of asphalt binders; (4) the asphalt mixture that were produced at optimum temperature suggested by manufacturer did not exhibit optimum result for all asphalt binder. CONCLUSIONS : The possibility of ITS was confirmed from this study for replacement of the Marshall Stability method. However, it needs to perform in further studies of aggregate and compaction property to suggest a new ITS standard value.