• Journal of Power Electronics
• /
• v.9 no.2
• /
• pp.232-242
• /
• 2009

In this paper, a matrix converter with improved low frequency output performance is proposed by achieving a one-step commutation owing to a general commutation circuit applicable to n-phase to m-phase matrix converters. The commutation circuit consists of simple resister and capacitor components, leading to a very stable, reliable and robust operation. Also, it requires no extra sensing information to achieve commutation, allowing for a one-step commutation like a conventional dead time commutation. With the dead time commutation strategy applied, the distortion caused by commutation delay is analyzed and compensated, therefore leading to better output linear behavior. In this paper, detailed commutation procedures of the R-C commutation circuit are analyzed. A selection of specific semiconductor switches and commutation circuit components is also provided. Finally, the effectiveness of the proposed commutation method is verified through a two-phase to single-phase matrix converter and the feasibility of the compensation approach is shown by an open loop space vector modulated three-phase matrix converter with a passive load.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.795-802
• /
• 2001

The commutation and control in matrix converters is more complicated as in voltage source converters. Natural freewheeling paths do not exist and the theoretic absent storage elements result in a direct coupled system of load and line currents as well as voltages. The paper offers an overview about staggered commutation and control policies in matrix converters. Based on the knowledge about load current direction and the signs of the line to line input voltages different multi-step commutation policies were derived. This paper examines the application of that policies in the case of space vector modulation and direct control methods with the focus on the resulting effects to the reference output voltage deviation.

• Journal of Power Electronics
• /
• v.3 no.1
• /
• pp.24-32
• /
• 2003

The commutation and control in matrix converters is more complicated as in voltage source converters. Natural freewheeling paths do not exist and the theoretic absent storage elements result in a direct coupled system of load and line currents as well as voltages. The paper offers an overview about staggered commutation and control policies in matrix converters. Based on the knowledge about load current direction and the signs of the line to line input voltages different multi-step commutation policies were derived. This paper examines the application of that policies in the case of space vector modulation and direct control methods with the focus on the resulting effects to the reference output voltage deviation.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.129-131
• /
• 2007

In this paper, a single phase matrix converter circuit with novel commutation technique is proposed. With commercial IGBT modules, the proposed converter is quite compact in structure and easy to build. The applied commutation strategy introduces a simple RC circuit as commutation aid without need for sensing information, leading to stable and reliable operation. The modulation method is explained; the detailed commutation procedure is illustrated. Finally, the simulation results show the validity and verification of the proposed single phase matrix converter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.2
• /
• pp.152-155
• /
• 2020

This study proposes an input filter for a gallium-nitride-based direct matrix converter with a stepless current commutation technique. Various current commutation strategies have been adopted for reliable operation of switches. These strategies are complex to be implemented and require additional components. The stepless current commutation technique is simple to operate but causes overcurrent issues due to the occurrence of short circuit on input sources. In this study, to restrict the short circuit current, we utilized GaN devices with fast switching properties and modified the input filter. The proposed input filter was verified by experimental results of induction motor drive.

• East Asian mathematical journal
• /
• v.29 no.3
• /
• pp.259-268
• /
• 2013

There are a lot of unsolved problems or issues regarding Kronecker products, vec-operator and Commutation matrices. We derived further properties and results of Kronecker products, vec-operator and Commutation Matrices.

• Journal of applied mathematics & informatics
• /
• v.12 no.1_2
• /
• pp.323-334
• /
• 2003

We review the developmental history of the moment matrix of matrix quadratic form. This paper also investigates, the moment matrix of (non-central) Wishart distribution, which is multi-version of X$^2$ distribution.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.550-559
• /
• 2005

The matrix converter provides sinusoidal input and output wave forms, bidirectional power flow, controllable input power factor and a long life, compared to the VSI(Voltage Source Inverter) with diode rectification stage at the input. However it has tasks, such as complexity of the control method, ride-through problem and low voltage-ratio limitation, to overcome for commercializing, This paper describes the design, construction and implementation of matrix converter based on space vector modulation technique. The implemented prototype of matrix converter is built using the exclusive IGBT module and control circuit constituted with DSP and CPLD and it has an input filter, overvoltage protection circuit and commutation means for overcoming practical issues. The good results tested using an induction motor are also presented.

• Journal of the Korean Statistical Society
• /
• v.25 no.3
• /
• pp.393-406
• /
• 1996

We obtain the general moment of non-central Wishart distribu-tion, using the J-th moment of a matrix quadratic form and the 2J-th moment of the matrix normal distribution. As an example, the second moment and kurtosis of non-central Wishart distribution are also investigated.

• Journal of Power System Engineering
• /
• v.3 no.4
• /
• pp.69-78
• /
• 1999

In the single-input and single-output system, the parameter of plant is scalar polynomial, but in the multiple input and multiple output, it accompanies, being matrix polynomial, the consideration of observable controlability index or problems non-commutation in matrix polynomial as well as degree, and it is more complex to deal with. Therefore, it is thought that a full research on the single-input and single-output system is not sufficient. This paper proposes that problems of minimum variance self-tuning regulator by using numerical calculation example of multivariable system and pole assignment self-tuning regulator.