• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1726-1734
• /
• 1993

This paper propose a survivable communication network design process using node degree that augments the usual traffic flow and cost analyses with previously ignored topological survivability and computing time considerations. At first, decide a initial topology, and then measure a throughput of network. If the throughput is smaller than the required traffic, add edge to the optimum place by using minimum node degree and link distance. Otherwise, drop useless edge by using maximum node degree, link distance and link utilization. This process is repeated until throughput equals to the required traffics. This Process designs a survivable communication network with the minimized cost and computing time and usual traffic flow. The design proceses that minimized computing time are freely select initial topology and easily design a large network. And these results of algorithm are compared with the Kris and Pramod's in order to analyses the perfmance of the designed network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.40-42
• /
• 2015

Our D2D (Device-to-Device) advertisement dissemination algorithm based on the convergence of a D2D communication and a social commerce service is able to efficiently deliver advertisement messages of small business owners. We here assume high user-density areas as target-areas, and these target areas can form several target-groups based on geographical proximity. Also, the isolated target-areas which are not included in the target-groups may have the opportunities for forming a new target-group in consideration of the maximum distance with AP. In this paper, we evaluate performances with respect to the total number of successfully received users and the average number of relay users in accordance with variation in the maximum distance for isolated target-areas.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.239-244
• /
• 2015

Recently, Impulse radars using UWB technologies are widely use for measuring distance, or for transmitting uncompressed high resolution videos. However, since the UWB band spans over octave bands, it is not easy to design such a system. Wide band impedance matching is required for antennas and other RF area. In this study, we designed and fabricated sinuous antenna for 3~6 GHz octave band application. We also designed and attached a dielectric lens to improved the directional gain of the antenna. The gain of the antenna was 6~10 dBi. The dielectric lens attached sinuous antenna was used to transmit HD video data. The maximum reach distance was 90 meter with 10mW power.

• Smart Media Journal
• /
• v.2 no.3
• /
• pp.10-16
• /
• 2013

NFC (Near Field Communication) was developed by SONY, NXP in 2002 and in 2003 respectively. It is one type of standard shore-range wireless communication system which operates in 13.56 MHz frequency band, within 10 cm distance and enables data transfer between devices with maximum rate of 424kbps. Various studies have been done on NFC technology and many handset manufacturers such as Apple, Google, Samsung Electronics Co., are trying to expand their market for new mobile services using this technology. This paper analyses the NFC standard technology, its trends and prospects in chapter II, which is followed by NFC systems and communication method in chapter III, and eventually NFC trends and future views is explained in chapter IV.

• Journal of information and communication convergence engineering
• /
• v.12 no.1
• /
• pp.8-13
• /
• 2014

We consider the sensor selection problem in large sensor networks where the goal is to find the best set of sensors that maximizes application objectives. Since sensor selection typically involves a large number of sensors, a low complexity should be maintained for practical applications. We propose a geometry-based sensor selection algorithm that utilizes only the information of sensor locations. In particular, by observing that sensors clustered together tend to have redundant information, we theorize that the redundancy is inversely proportional to the distance between sensors and seek to minimize this redundancy by searching for a set of sensors with the maximum average distance. To further reduce the computational complexity, we perform an iterative sequential search without losing optimality. We apply the proposed algorithm to an acoustic sensor network for source localization, and demonstrate using simulations that the proposed algorithm yields significant improvements in the localization performance with respect to the randomly generated sets of sensors.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.98-108
• /
• 2020

We consider transmit antenna selection combined with power allocation for quadrature spatial modulation (QSM) systems to improve the error rate performance. The Euclidean distance-based joint optimization criterion is presented for transmit antenna selection and power allocation in QSM. It requires an exhaustive search and thus high computational complexity. Thus its reduced-complexity algorithm is proposed with a strategy of decoupling, which is employed to successively find transmit antennas and power allocation factors. First, transmit antennas are selected without considering power allocation. After selecting transmit antennas, power allocation factors are determined. Simulation results demonstrate considerable performance gains with lower complexity for transmit antenna selected QSM systems with power allocation, which can be achieved with limited rate feedback.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.437-444
• /
• 2009

Underwater sensor networks (USN) for ocean development and disaster prevention have been emerged as one of interesting research topics recently. Since a high-speed and inexpensive communication modem is a prerequisite for deployment of USN, we design and implement an underwater modem by utilizing general-purpose waterproof ultrasonic sensors in this paper. We also make experiments in indoor and outdoor environment with two modems facing each other to conduct a point-to-point communication. According to the experiments, we can achieve the data rates of 1.5 kbps in a water tank and 2 kbps in a pond. Also, the maximum communication distance between two modems is about 30 meters. Besides, we conduct a point-to-multipoint experiment imitating USN by deploying a gateway, a sink node and three sensor nodes in a water tank.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.3
• /
• pp.234-239
• /
• 2010

An inductive coupler, which feeds communication to the electric power transmission line, is required to establish Power Line Communication(PLC). The electro-magnetic property of magnetic core and design technology for coupler are very important to manufacture an inductive coupler for power transmission line. The magnetic core with superior electro-magnetic property was manufactured by using nanocrystalline alloy and an inductive coupler, which can operate at the maximum 2,000 A current, was designed and manufactured by establishment of current saturation, signal out winding, and electromagnetic simulation in this study. Communication speed of 14 Mbps in 600 meter communication distance of the real electric power transmission line was obtained by using the inductive coupler and application possibility of the inductive coupler for the electric power transmission line was certified.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.439-440
• /
• 2008

An inductive coupler, which feeds communication to the electric power transmission line, is required to establish Power Line Communication(PLC). The electro-magnetic property of magnetic core and design technology for coupler are very important to manufacture an inductive coupler for power transmission line. The magnetic core with superior electro-magnetic property was manufactured by using nano-crystalline alloy and an inductive coupler, which can operate at the maximum 2,000 A current, was designed and manufactured by establishment of current saturation, signal out winding, and electro-magnetic simulation in this study. Communication speed of 14 Mbps in 600 m communication distance of the real electric power transmission line was obtained by using the inductive coupler and application possibility of the inductive coupler for the electric power transmission line was certified.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.187-192
• /
• 2017

Rigorous longitudinal modal transmission-line theory (L-MTLT) is applied to analyze maximum power transfer in asymmetric grating-assisted directional couplers(A-GADC). By defining a coupling efficiency amenable to rigorous analytical solutions and interference between symmetric and asymmetric supermodes, the power exchange of TE modes as a function of propagation distance is numerically evaluated. The numerical result reveals that maximum power transfer occurs at a grating period ${\Lambda}_{eq}$, in which the insertion loss of supermodes is equal to each other. That is, it is generally different from conventional phase-matching condition of GADC. Furthermore, as the asymmetric profile of grating change to symmetrical profile, the coupling length decreases and the coupling efficiency for power transmission increases.