• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.245-251
• /
• 2022

Educational reform in Ukraine encourages the use of multimedia technologies in the training of specialists in Physical Education and Sports, which is one of the promising directions of education development. Therefore, the article specifies the content of the terms "innovation" and "technology". For modern society, the introduction of multimedia technologies in education is not so much theoretical as pragmatic, since under condition of globalization it concerns its historical development and prospects associated with the so-called "high technologies".Our goal is to improve the training of Physical Education and Sports specialists by means of multimedia technologies. All of innovative technologies can be divided into four groups, depending on the appropriate form of educational activity for their use. The development of multimedia technologies in the training of specialists in Physical Education and Sport at the present stage of education development should be carried out in accordance with the criteria of manufacturability, which are presented in the article: scientism, to rely on the theoretical provisions of pedagogical science and methods of teaching the discipline, socially recognized educational goals, prospects for modernization of Education; consistency, which provides for the interaction of parts and the whole in the organization of the study environment, as a result of which the physical development of the young generation is an integral entity; guarantee, that is, the error between the planned and obtained results should be minimal; manageability, that is, full management of the stages of work of the teacher and students, which make up the completed cycle of actions; mass participation, for the purpose of applying the technology does not depend on the physical training of students, the pedagogical skill of the teacher and the type of educational institutions. The article presents the theory and method of organizing sports events and circuses in the training of specialists in Physical Education and Sports by means of multimedia technologies. In order to increase the level of physical development of a person, physical fitness and the state of health of students, which has a clear trend to constant deterioration, it is necessary to instill love for sports, carry out high-quality training and organize sports events using multimedia technologies. In the process of sports activities, the participants' mental education is carried out. There are two types of communication here: direct and indirect, which are described in the article.In games and sports competitions, there are many opportunities for forming rules of collective behavior. The main issues of the organization of sports activities by means of multimedia technologies have been clarified. During sports competitions, the tasks presented in Physical Education and sports classes are improved, which ensure the improvement of physical and theoretical training of the individual. The pleasure of sports, bright, emotional spectacles, confirmed by multimedia technologies, arises from the participation of the viewer in them.

• Journal of Digital Convergence
• /
• v.19 no.5
• /
• pp.187-196
• /
• 2021

The mobility handicapped are representative socially vulnerable people who account for a high percentage of our society. Due to the recent development of technology, personalized welfare technologies for the socially vulnerable are being studied, but it is relatively insufficient compared to the general people. In this study, we intend to implement a personalized restaurant recommendation system for the mobility handicapped. To this end, a hybrid recommendation system was implemented by combining the data of special transportation boarding and alighting history (7,153 cases) and information of Daegu Food restaurants (955 cases). In order to evaluate the effectiveness of the implemented recommendation system, we conducted performance comparisons with existing recommendation systems by prediction error rate and recommendation coverage. As a result of the analysis, the performance was higher than that of the existing recommendation system, and the possibility of a personalized restaurant recommendation system for the mobility handicapped was confirmed. In addition, we also confirmed the correlation in which similar restaurants are recommended in some types of the mobility handicapped. As a result of this study, it is judged that it will contribute to the use of restaurants with high satisfaction for the mobility handicapped, and the limitations of the study are also presented.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.451-463
• /
• 2022

Whenever a mineshaft accidentally collapses, speedy risk assessment is both required and crucial. But onsite safety diagnosis by humans is reportedly difficult considering the additional risk of collapse of the unstable mineshaft. Generally, drones equipped with high-speed lidar sensors can be used for such inspection. However, the drone technology is restrictively applicable at very shallow depth, failing in mineshafts with depths of hundreds of meters because of the limit of wireless communication and turbulence inside the mineshaft. In previous study, a three-dimensional (3D) scanning system with a single channel lidar was fabricated and operated using towed cable in a mineshaft to a depth of 200 m. The rotation and pendulum movement errors of the measuring unit were compensated for by applying the data of inertial measuring unit and comparing the similarity between the scan data of the adjacent depths (Kim et al., 2020). However, the errors grew with scan depth. In this paper, a multi-channel lidar sensor to obtain a continuous cross-sectional image of the mineshaft from a winch system pulled from bottom upward. In this new approach, within overlapped region viewed by the multi-channel lidar, rotation error was compensated for by comparing the similarity between the scan data at the same depth. The fabricated system was applied to scan 0-165 m depth of the mineshaft with 180 m depth. The reconstructed image was depicted in a 3D graph for interpretation.

• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.325-331
• /
• 2022

As IoT devices are used in various ways in an edge network environment, multiple studies are being conducted that utilizes the information collected from IoT devices in various applications. However, it is not easy to apply accurate IoT data immediately as IoT data collected according to network environment (interference, interference, etc.) are frequently missed or error occurs. In order to minimize mistakes in IoT data collected in an edge network environment, this paper proposes a management technique that ensures the reliability of IoT data by randomly generating signature values of IoT data and allocating only Security Information (SI) values to IoT data in bit form. The proposed technique binds IoT data into a blockchain by applying multiple hash chains to asymmetrically link and process data collected from IoT devices. In this case, the blockchainized IoT data uses a probability function to which a weight is applied according to a correlation index based on deep learning. In addition, the proposed technique can expand and operate grouped IoT data into an n-layer structure to lower the integrity and processing cost of IoT data.

• Smart Media Journal
• /
• v.12 no.8
• /
• pp.9-17
• /
• 2023

The development of information and communication technology and the improvement of the development and dissemination of smart devices have caused changes in the form of tourism, and the concept of smart tourism has since emerged. In this regard, researches related to smart tourism has been conducted in various fields such as policy implementation and surveys, but there is a lack of research on application reviews. This study collects Trip Advisor application review data in the Google Play Store to identify usage of the application and user satisfaction through Latent Dirichlet Allocation (LDA) topic modeling. The analysis results in four topics, two of which are positive and the other two are negative. We found that users were satisfied with the application's recommendation system, but were dissatisfied when the filters they set during search were not applied or that reviews were not published after updates of the application. We suggest more categories can be added to the application to provide users with different experiences. In addition, it is expected that user satisfaction can be improved by identifying problems within the application, including the filter function, and checking the application environment and resolving the error occurring during the application usage.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.1-10
• /
• 2023

This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.2
• /
• pp.103-111
• /
• 2023

Consensus, that aims to converge the states of agents to the same states through information exchanges between agents, has been widely studied to control the multi-agent systems. In real systems, the measurement variables of each agent may be different, the loss of information across communication may occur, and the different networks for each state may need to be constructed for safety. Moreover, the input saturation and the disturbances in the system may cause instability. Therefore, this paper studies the PID(Proportional-Integral-Derivative)-based consensus control to achieve the swarm behavior of the multi-agent systems considering the heterogeneous state information, the input saturations, and the disturbances. Specifically, we consider the multiple follower agents and the single leader agent modeled by the second-order systems, and investigate the conditions to achieve the consensus based on the stability of the error system. It is confirmed that the proposed algorithm can achieve the consensus if only the connectivity of the position graph is guaranteed. Moreover, by extending the consensus algorithm, we study the formation control problem for the multi-agent systems. Finally, the validity of the proposed algorithm was verified through the simulations.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.835-840
• /
• 2023

RFID(Radio Frequency Identification) systems are attracting attention as a key component of Internet of Things technology due to the cost and energy efficiency of application services. In order to use RFID technology in the IoT application service field, it is necessary to be able to store and manage various information for a long period of time as well as simple recognition between the reader and tag of the RFID system. And in order to read and write information to tags, a performance improvement technology that is strong and reliable in poor wireless channels is needed. In particular, in the UHF(Ultra High Frequency) RFID system, since multiple tags communicate passively in a crowded environment, it is essential to improve the recognition rate and transmission speed of individual tags. In this paper, Middleton's Class A impulsive noise model was selected to analyze the performance of the RFID system in an impulsive noise environment, and FM0 encoding and Miller encoding were applied to the tag to analyze the error rate performance of the RFID system. As a result of analyzing the performance of the RFID system in Middleton's Class A impulsive noise channel, it was found that the larger the Gaussian noise to impulsive noise power ratio and the impulsive noise index, the more similar the characteristics to the Gaussian noise channel.

• The Transactions of the Korea Information Processing Society
• /
• v.13 no.7
• /
• pp.291-298
• /
• 2024

Despite its wide application, cloud computing raises privacy leakage concerns because users should send their private data to the cloud. Homomorphic encryption (HE) can resolve the concerns by allowing cloud servers to compute on encrypted data without decryption. However, due to the huge computation overhead of HE, simply executing an entire cloud program with HE causes significant computation. Manually partitioning the program and applying HE only to the partitioned program for the cloud can reduce the computation overhead. However, the manual code partitioning and HE-transformation are time-consuming and error-prone. This work proposes a new homomorphic encryption enabled annotation-guided code partitioning compiler, called Heapa, for privacy preserving cloud computing. Heapa allows programmers to annotate a program about the code region for cloud computing. Then, Heapa analyzes the annotated program, makes a partition plan with a variable list that requires communication and encryption, and generates a homomorphic encryptionenabled partitioned programs. Moreover, Heapa provides not only two region-level partitioning annotations, but also two instruction-level annotations, thus enabling a fine-grained partitioning and achieving better performance. For six machine learning and deep learning applications, Heapa achieves a 3.61 times geomean performance speedup compared to the non-partitioned cloud computing scheme.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.185-188
• /
• 2009

Purpose: Standard of retests were discrepant and inconsistent due to inaccuracy and lack of standardization within normal range limit of tumor marker test. To enhance the standardization of retests set standard value below normal range and the Order Communication System Quality Control (OCS QC) program was put in place. This program enables managing the results within lower limit of normal range which were used for tumor marker test in Health Center. Materials and Methods: At present the tumor marker study for AFP, CEA, CA19-9, CA125, and PSA included outpatients in Asan Medical Center from February to March, 2009. The standard value was obtained by using the percentage of CV of Inter Assay according to the normal range of each tumor test. The results were confirmed by using the OCS QC program via formatted assessment of screening test such as test items, standard value and medical department. The number of out-of-range results within plus and minus 30 percents regarding the five primary items of tumor marker test was assessed. The next step was to obtain the number of AFP, CEA, and CA125 according to the ratio of comparison between prior and post test result, 60%, 50%, and 40% within normal range, respectively. In addition, set standard value below normal range. Results: The first screening test with percentage of sample number was resulted between 30%-40% and the second one was AFP 26.1%, CEA 18.9%, CA19-9 17.3%, CA125 18.7%, and PSA 21.0% obtained screening percentage of average 20 percents. The limited value of retest was AFP less than 5.0 and more than 10.0, CEA less than 1.0 and more than 3.0, CA19-9 less than 10.0 and more than 30.0, and PSA less than 1.0 and more than 2.0 to set and the number of retest was obtained by applying to the limited value of retest to screening percentage of average 20 percents For two months, the number of retest was AFP 0, CEA 15, CA19-9 3, CA125 2, and PSA 5. Conclusions: Through using the OCS QC program in establishing the standard of retest systemically, there appeared to be reduced discrepancy among the examiners and to be expected improvement in relation to the error of results.