• The KIPS Transactions:PartC
• /
• v.15C no.1
• /
• pp.61-68
• /
• 2008

With the rapid advancement of mobile communication, mobile devices are evolving into convergence devices with various multimedia capabilities. But, high performance of devices demands complicated settings, and thus contains latent error possibilities, and poor system performance caused by the collision of different softwares. To solve these problems, device management becomes an important issue. Open Mobile Alliance(OMA) developed OMA DM(Device Management), which is a device management standard. Recently released OMA DM v1.2 provides improved mobile device management methods compared to earlier versions. This paper introduces design and implementation of OMA DM v1.2 based management agent. By using Tree and Description Serialization(TNDS) for acquiring, adding, and editing objects in the mobile devices, it provides more effective device management with small amount of network traffic.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.10
• /
• pp.2562-2570
• /
• 1997

This paper deals with the design and performance of the adaptive equalizer using high order statistics in order to improve the transmission characteristics of multipath fading channel. The multipath propagational phenomenon occurred in digital radio transmission causes the distortion and ISI of receiving signal. These are main reasons to increase the bit error rate and degrade the performance of receivers. In this paper, the adaptive equalization algorithm using high order statistics of received signal is used instead of CMA algorithm, Bussgang and Godard which are known widely. The performance of this algorithm (residualisi, recovered constellation, calculation) is presented varing SNR. As the result of the computer simulation, equalizer algorithm using high order statistics is better than CMA in the range of low SNR, $10{\sim}20dB$. Therefore, considering the actual communication systems which use the range of $14{\sim}20$ SNR, the adaptive equalizer using high order statistics can be used in the real multipath fading environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2637-2642
• /
• 2015

The low-density parity check(LDPC) code is being widely used due to its outperformed error-correction ability. The decoder of the quasi-cyclic LDPC(QC-LDPC) codes, a kind of LDPC codes, requires a multi-size cyclic shifter(MSCS) performing rotation of various sizes. The MSCS can be implemented with a Benes network, which requires a $3{\times}3$ switch if the number of data to be rotated is a multiple of 3. This paper proposes a control signal generation with lower complexity and a faster $3{\times}3$ switch. For the experiment, the proposed schemes are applied to the MSCS of an IEEE 802.16e WiMAX QC-LDPC code decoder. The result shows that the delay is reduced by about 8.7%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2569-2575
• /
• 2015

Network RTK generally uses a linear interpolation method by using the corrections from reference stations. This minimizes the spatial decorrelation error caused by the increase of distance between the reference station's baseline and user's baseline. However, tropospheric delay, a function of the meteorological data can cause a spatial decorrelation characteristic among reference stations within a network by local meteorological difference. A non-linear characteristic of tropospheric delay can deteriorate Network RTK performance. In this paper, the modeling of tropospheric delay irregularity is made from the data when the typhoon is occurred. By using this modeling, analyzing the effect of meteorological difference between reference stations on correction is performed. Finally, we analyze an effect of non-linear characteristics of tropospheric delay among reference stations to Network RTK user.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10B
• /
• pp.899-915
• /
• 2003

Delivering rich and continuous media contents robustly over a wide range of network conditions of the wired/wireless Internet is a highly challenging task. To address this challenges, the continuous media applications at the edge of network has become more and more adaptive while the best-effort Internet is slowly progressing towards improved networking services. That is, the role of network adaptive media delivery, which dynamically links the quality demand of application contents to the underlying networking services, has become more crucial. In this paper, we will first review the required network adaptation functionalities seen from the application side: congestion control / rate control, error control, and synchronization / adaptive playout. Then, we start the coverage of networking support issues that helps the realization of network adaptive media streaming - from network support and protocol support toward consolidated support via middleware. Finally, we propose a dynamic network adaptation framework that efficiently leverages its awareness of both media application (including contents) and underlying networking support.

• The Mathematical Education
• /
• v.48 no.3
• /
• pp.329-352
• /
• 2009

The purpose of this study was to investigate the effects of small group cooperative communicative activities on the strategies for estimating measurement. To do this, two research questions were set as follow: First, are there any differences between strategies employed by students in the experimental group and the control group before and after the estimating measurement activities? Second, are there any differences between strategies employed by students in different ability levels(upper, middle, lower) of pre-estimating measurement test in the experimental group? The research results were drawn from the investigation as below: First, the strategical change of before and after the estimating measurement tasks in the experimental group was quite noticeable. Unlike the small strategical change in the control group, small group cooperative communicative learning resulted in a decrease of simple memorization and guessing strategies and an increase of refined strategies such as the standard strategy, clustering, unit load and so on. Second, mathematical communicative activities in a small group cooperative learning showed that the students in the upper level of pre-estimating measurement test used more refined strategies and the students in the lower level used simple memorization and guessing strategy more frequently. And through interaction in small group, students could have chances to recognize error of strategies and to modify and learn strategies. In conclusion, small group cooperative activities allowed students to have chances to communicate mathematically and it is a efficient way of helping students learn estimating measurement strategies.

• Journal of Biomedical Engineering Research
• /
• v.17 no.4
• /
• pp.449-458
• /
• 1996

Most of the conventional electrocardiowaphs foil to detect signals other than P-QRS-T due to the limited SNR and bandwidth. High-resolution electrocardiography(HRECG) provides better SNR and wider bandwidth for the detection of micro-potentials with higher frequency components such as vontricular late potentials(LP). We have developed a HRECG using uncorrected XYZ lead for the detection of LPs. The overall gain of the amplifier is 4000 and the bandwidth is 0.5-300Hz without using 60Hz notch filter. Three 16-bit A/D converters sample X, Y, and Z signals simultaneously with a sampling frequency of 2000Hz. Sampled data are transmitted to a PC via a DMA-controlled, optically-coupled serial communication channel. In order to further reduce the noise, we implemented a signal averaging algorithm that averaged many instances of aligned beats. The beat alignment was carried out through the use of a template matching technique that finds a location maximizing cross-correlation with a given beat tem- plate. Beat alignment error was reduced to $\pm$0.25ms. FIR high-pass filter with cut-off frequency of 40Hz was applied to remove the low frequency components of the averaged X, Y, and Z signals. QRS onset and end point were determined from the vector magnitude of the sigrlaIL and some parameters needed to detect the existence of LP were estimated. The entire system was designed for the easy application of the future research topics including the optimal lead system, filter design, new parameter extraction, etc. In the developed HRECG, without signal averaging, the noise level was less than 5$\mu$V$_rms RTI$. With signal averaging of at least 100 beats, the noise level was reduced to 0.5$\mu$V$_rms RTI$, which is low enough to detect LPs. The developed HRECG will provide a new advanced functionality to interpretive ECG analyzers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.677-684
• /
• 2017

Smart devices are used in a variety of industries, because applications for them are easy to develop and portable. However, industrial equipment can cause security problems for information and accidents when controlling the actuator of the equipment at a remote location. In this paper, we studied methods of solving these problems and the advantages of applying smart control systems to industrial equipment. We propose a manual manipulation method using queries and a smart control access procedure for controlling equipment using a smart device. In addition, we propose a data transmission method employing multiple encryption protocols and a user authentication method using unique information from the smart device and Q & A as the communication data protection and user authentication methods, respectively. In order to evaluate its performance, an operation test of the smart control system and user authentication comparison experiment were performed. In order to understand the advantages of applying the smart control system to the equipment, we conducted a comparative experiment with a teach pendant and evaluated its reaction time in case of error.

• Journal of Korea Multimedia Society
• /
• v.16 no.1
• /
• pp.67-74
• /
• 2013

In this paper, we propose the pointing and correction algorithm for optimized performance based on Bluetooth communication. The error from the accelerometer sensor's output must be carefully managed as the accelerometer sensor is more sensitive to data change compared to that of the gyroscope sensor. Thus, we minimize the noise by applying the Kalman filter to data for each axis from the accelerometer. In addition, we can also obtain effect compensating the hand tremor by applying the Kalman filter to the data variation for x and y. In this study, we extract data through the Quaternion mapping process on data from the accelerometer and gyroscope. In turn, we can obtain a tilt compensation by applying a compensation algorithm with acceleration of the gravity of the extracted data. Moreover, in order to correct the inaccuracy on smart sensor due to the rapid movement of a device, we propose a adaptive pointing and correction algorithm using the genetic approach to generate the initial population depending on the user.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.190-196
• /
• 2004

The development of a new hardware structure which can implement the viterbi algorithm efficiently is required for applications such as a software radio because the viterbi algorithm, which is an error correction code function for the second and the third generation of mobile communication, needs a lot of arithmetic operations. The length of K in the viterbi algorithm different from each standard, for examples, K=7 in case of IS-95 standard and GSM standard, and K=9 in case of WCDMA and CDMA2000. In this paper, we propose a new hardware structure of an adaptive viterbi decoder which can decode the constraint length in K=3~9 and the data rate in 1/2 ~ 1/3. Prototyping results targeted to Altera Cyclon EPIC20F400C8, shows that the proposed hardware structure needs maximum 19,276 logic elements and power dissipation of 222.6 mW.