• 대한인간공학회지
• /
• 제34권3호
• /
• pp.247-264
• /
• 2015

Objective: The purpose of this study is to determine the priority of information presentation and the effective menu type to be placed in the center of a gauge cluster display for commercial trucks and to present a set of ergonomic designs for the gauge cluster display. Background: An effective ergonomic design is specifically needed for the development of the gauge cluster display for the commercial trucks, because more diverse and heavier information is delivered to truck drivers, compared to the information to passenger car drivers. Method: First, all the information that must be shown on the commercial truck display was collected. Then, the severity, frequency of use, and display design parameters were evaluated for those information by commercial truck drivers. Next, an analysis on the information attributes and the heuristic evaluation utilizing the display design principles were carried out. According to the results, a design alternative of the main screen to be displayed was constructed by priority. A comparative analysis between the alternative and existing main screens was also conducted to see the efficacy of the designs. Lastly, we conducted an experiment for the selection of menu type. The experiment was conducted using the driving simulator with an eye-tracking device. The independent variables were four types of the menu reflecting the commercial truck characteristics such as grid type, icon type, list type, and flow type. We measured preference, total execution time, the total duration of fixation on the gauge cluster area, and the total number of fixation on the gauge cluster area as dependent variables. Results: Four types of driver convenience information and six types of driver assistance information were selected as the information to be placed primarily on the main screen of the gauge cluster. The Grid type was the most effective among the menu types. Conclusion: In this study, the information that appears on the main screen of the display, the division of the display and the design of the menu type for commercial truck drivers were suggested. Application: This study is expected to be utilized as guidelines on the ergonomic design of a gauge cluster display for commercial trucks.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.154-160
• /
• 1998

Ride quality of medium truck became a very important factor in the suspension design, to the demand of more comfortable ride of passengers. This study describes how to determine and evaluate design parameters related to the chassis suspension system with time and frequency analysis. The spring stiffness and damping force of the chassis suspension system were obtained by observing the vertical acceleration PSD. The simulation was carried out on various road profiles, which was suggested by ISO. The pitching motion of the medium size truck was observed to improve the ride quality. A computer simulated truck model was constructed using DADS, a commercial dynamic analysis software, in order to simulate the truck motions. From the analyzed process of suspension parameters, it was concluded that the spring and the shock absorbers affect the pitching of the vehicle. In order to validate the computer simulated truck model, a physical prototype was constructed and tested.

• 한국ITS학회 논문지
• /
• 제18권6호
• /
• pp.76-95
• /
• 2019

자중계는 화물차 운전자들이 자신의 화물무게를 인지하지 못해서 생기는 부득이한 과적을 방지하기 위해서 반드시 필요한 기술이다. 본 연구에서는 자중계의 일본의 의무장착 사례와 국내 활용현황에 대하여 조사하고 자중계와 GPS, 모뎀을 연동한 IoT 관제시스템을 시험차량에 설치한 후 원격 모니터링을 통해 과적운행패턴을 규명하고, 자중계 설치 시 과적 예방효과와 운송 효율성에 대하여 분석하고자 하였다. 장기 모니터링 데이터를 분석한 결과, 자중계 설치 후 운전자가 화물중량을 인지함으로써 과적율과 과적 중량이 감소되는 효과를 확인하였으며, 건설기계 차량의 경우 운송거리 단축에 의한 운송효율이 높아지는 결과를 확인하였다. 또한 단속지점의 GPS 좌표와 화물차량의 이동경로를 매칭하여 과적상태인 경우 회피 운행경로를 분석하였으며, 적재물의 종류에 따른 운행거리와 적재중량을 분석하였다.

• 동력기계공학회지
• /
• 제17권4호
• /
• pp.23-30
• /
• 2013

In this paper, the payload condition is considered and computer simulation is carried out to analyze the dynamic behavior of the middle-sized truck under the condition with different weight and location. The computer model for the truck is established and ADAMS/Car is employed to simulate the truck vehicle. A single lane change and bump-pass simulation are performed to evaluate the performance according to the weight and the position of it. Effects of the location and weight of commercial vehicle are analyzed. According to the simulation results, the front deck is preferred as the load location.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1559-1569
• /
• 2013

본 연구는 지역적 범위에 따른 화물자동차의 통행발생 특성을 비교 분석함으로써 지역간 및 대도시 화물수요모형 추정의 차이점을 도출하고 지역적 범위에 적합한 화물수요모형 개발의 필요성을 제시하고자 하였다. 지역간 및 대도시 화물자동차의 통행발생 특성을 분석하기 위하여 화물자동차 속성, 출발지 특성, 도착지 특성, 적재품목을 고려한 서열로짓모형을 구축하였으며, 이를 통하여 다양한 특성이 화물자동차의 통행발생에 미치는 영향을 정량적으로 분석하였다. 분석결과, 지역간 화물자동차와 대도시 화물자동차의 통행발생 특성은 화물자동차 속성, 출발지 특성, 도착지 특성, 적재품목에서 모두 서로 상이한 것으로 나타났다. 특히 지역간 화물자동차는 대도시와 달리 출발지 및 도착지 유형이 제조업이고, 출발지 및 도착지의 산업단지 생산액이 클수록 통행수가 많은 것으로 나타났다.

• 한국환경과학회지
• /
• 제22권9호
• /
• pp.1105-1113
• /
• 2013

This paper attempted to estimate the emissions of HFC-134a from scrap truck as a result of measuring the residual quantities of HFC-134a in air conditioner of scrap truck. We measured the residual amounts in the scrap truck of 138 by applying commercial recover for refrigerants. The average residual rate(disposal-phase emission factor) is reported to be $44.3{\pm}3.3%$ within a confidence interval of 95%. Recent year model trucks exhibit the higher residual rates. Little variation, however, is observed in regard to vehicle size. The HFC-134a emission quantity from scrap truck in 2011 is estimated to be 55,908 $tCO_2$-eq that demonstrates 21.4% increase to compare with that in 2007. As the numbers of truck have increased dramatically during the last two decades, the emissions of HFC-134a from scrap truck would increase sharply in the next coming years. HFC-134a is a very high GWP greenhouse gas. therefore have to reduce the emissions from the scrap truck and need to find ways to recycle. The chemical compositions of refrigerants from scrap truck are quite similar to those of new refrigerants, suggesting that the refrigerants from scrap truck could be reused as refrigerant.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.67-72
• /
• 2004

Generally, the commercial truck has the hydraulic cab tilting system which absorb the vibrations and impacts of the cab. The cab tilting system is equipped for the maintenance and inspection of truck. And it is very important to help user's feeling of driving and convenience. But when the truck cab is tilted, existing model has serious problem of vibration. To satisfy customer's requirements for convenience, it is necessary to improve the hydraulic truck cab tilting system. In this study, the optimization of cab tilting system is carried out by using the G.A to reduce the vibration. The results show that the vibration is reduced and the mean velocity of tilting is improved. In conclusion the improved cab tilting system can be designed and the possibility of optimal design for cab tilting system by using the GA is testified.

• Safety and Health at Work
• /
• 제6권2호
• /
• pp.104-113
• /
• 2015

Background: Given the long hours on the road involving multiple and interacting work stressors (i.e., delivery pressures, irregular shifts, ergonomic hazards), commercial drivers face a plethora of health and safety risks. Researchers goal was to determine whether and to what extent long-haul trucker work schedules influence sleep duration and quality. Methods: Survey and biometric data collected from male long-haul truck drivers at a major truckstop in central North Carolina over a six month period. Results: Daily hours worked (mean = 11 hours, 55 minutes) and frequency of working over government-mandated daily HOS regulations (23.8% "frequently or always") were statistically significant predictors of sleep duration. Miles driven per week (mean = 2,812.61), irregular daily hours worked (63.8%), and frequency of working over the daily hour limit (23.8% "frequently or always") were statistically significant predictors of sleep quality. Conclusion: Implications of findings suggest a comprehensive review of the regulations and operational conditions for commercial motor vehicle drivers be undertaken.

• 한국소음진동공학회논문집
• /
• 제25권6호
• /
• pp.377-383
• /
• 2015

Torsion mode or bending mode of drive-line for rear-wheel drive vehicle exists in low frequency band. If resonance exists there between natural mode of driveline and powertrain excitation force, drive-line will manifest excessive vibration response. Also, the vibration response can be transmitted to vehicle body and can induce booming noise. A vehicle in this study exhibits a booming noise problem under specific transmission gear condition. To draw performance improvement plan, finite element analysis technique was used. Modification was evaluated qualitatively and priorities were derived. Finally, effectiveness of best modification was verified through test and full vehicle FE analysis.

• 교통기술과정책
• /
• 제13권3호
• /
• pp.43-50
• /
• 2016