DOI QR코드

DOI QR Code

An Analysis of Driving Pattern and Transportation Efficiency of Commercial Vehicle using On-board Truck scale

자중계 적용을 통한 화물차량 운행패턴 및 운송효율성 분석

  • Received : 2019.10.29
  • Accepted : 2019.11.12
  • Published : 2019.12.31

Abstract

An on-board truck scale is an essential technical solution for preventing overload, which makes the driver aware of the commercial vehicle weight. This study analyzed the effects of the driving pattern and transportation efficiency by the IoT Platform service for an on-board truck scale. A comparison of before and after installation using the long-term monitored data confirmed the reduction effects both of the overload ratio and overweight value, and their effects on increasing the transportation efficiency. In addition, the analysis result of the driving route showed that the installation of an on-board truck scale could be a more effective way of preventing overload than increasing the weighing checkpoints.

자중계는 화물차 운전자들이 자신의 화물무게를 인지하지 못해서 생기는 부득이한 과적을 방지하기 위해서 반드시 필요한 기술이다. 본 연구에서는 자중계의 일본의 의무장착 사례와 국내 활용현황에 대하여 조사하고 자중계와 GPS, 모뎀을 연동한 IoT 관제시스템을 시험차량에 설치한 후 원격 모니터링을 통해 과적운행패턴을 규명하고, 자중계 설치 시 과적 예방효과와 운송 효율성에 대하여 분석하고자 하였다. 장기 모니터링 데이터를 분석한 결과, 자중계 설치 후 운전자가 화물중량을 인지함으로써 과적율과 과적 중량이 감소되는 효과를 확인하였으며, 건설기계 차량의 경우 운송거리 단축에 의한 운송효율이 높아지는 결과를 확인하였다. 또한 단속지점의 GPS 좌표와 화물차량의 이동경로를 매칭하여 과적상태인 경우 회피 운행경로를 분석하였으며, 적재물의 종류에 따른 운행거리와 적재중량을 분석하였다.

Keywords

References

  1. Agus T. M., Danang P., Max A. and Rahmad R.(2010), "Analysis of Loss Cost of Road Pavement Distress due to Overloading Freight Transportation," The Journal of the Eastern Asia Society for Transportation Studies, vol. 8. pp.706-721.
  2. Choi Y. H., Kwon S. M. and Park M. S.(2016), "An Effectiveness Analysis of Pilot Enforcement for Overweight Vehicles(Trucks) using High-Speed Weigh-In-Motion System," The Journal of The Korea Institute of Intelligent Transport Systems, vol. 15, no. 2, pp.63-73. https://doi.org/10.12815/kits.2016.15.2.063
  3. e-Gov Japan Law Information Search, http://elaws.e-gov.go.jp/, 2019,10.16.
  4. Environmental Industries office of japan(2016), Recent Trends and Overview of the Metric system, pp.3-5.
  5. Korea Expressway Corporation(2012), Status of overweight trucks on expressway, p.16.
  6. Kwon S. M., Jung Y. Y. and Lee K. B.(2012), "Overloading Control Effectiveness of Overweight Enforcement System using High-Speed Weigh-In-Motion," The Journal of The Korean Society of Road Engineers, vol. 14, no. 5, pp.179-188.
  7. Lee S. H.(2013), A Study of the Factors for the Overloading of Business-Purpose Trucks and Improvement, Myongji University, pp.3-5.
  8. Lloyd D., Charles K., David C., Jonathan B., Anthony G., Peter E. and Chris B.(2012), "On-board mass monitoring of heavy vehicles: Results of testing program," Road and Transport Research, vol. 19, no. 1, pp.15-16.
  9. National Law Information Center, http://www.law.go.kr/, 2019.10.16.
  10. Right Weight, https://www.rwls.com/, 2019.11.12.
  11. Tokyo Department of Finance(2016), Guideline for preventing overloading, pp.4-6.
  12. Transport Certification Australia TCA(2009), Heavy Vehicle On-Board Mass Monitoring - Capability Review, pp.20-27.
  13. VPG(Vishay Precision Group), https://vulcanscales.com/, 2019,11,12.