Journal of Power System Engineering (동력기계공학회지)

The Korean Society for Power System Engineering (한국동력기계공학회)
권호 표지
DOI QR코드

DOI QR Code

Study on the Effect of the Payload and Weight Position on the Handling and Ride Comfort of a Truck

트럭의 화물적재량과 적재위치가 조안성 및 승차감에 미치는 영향에 관한 연구

  • Cha, Hyun-Kyung (Department of Mechanical Engineering, The Graduate School, Pukyong National University) ;
  • Choi, Gyu-Suk (Department of Mechanical Engineering, The Graduate School, Pukyong National University) ;
  • Sohn, Jeong-Hyun (Department of Mechanical and Automotive Engineering, Pukyong National University)
  • 차현경 (부경대학교 대학원 메카트로닉스공학과) ;
  • 최규석 (부경대학교 대학원 메카트로닉스공학과) ;
  • 손정현 (부경대학교 기계자동차공학과)
  • Received : 2013.03.12
  • Accepted : 2013.07.11
  • Published : 2013.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the payload condition is considered and computer simulation is carried out to analyze the dynamic behavior of the middle-sized truck under the condition with different weight and location. The computer model for the truck is established and ADAMS/Car is employed to simulate the truck vehicle. A single lane change and bump-pass simulation are performed to evaluate the performance according to the weight and the position of it. Effects of the location and weight of commercial vehicle are analyzed. According to the simulation results, the front deck is preferred as the load location.

Keywords

References

  1. DACO, 2007, "The Trend and Prospect of Market of Korea Commercial Vehicle and Demand Industry", Jinhan M&B, pp. 3-27.
  2. C. R. Lee, 1991, "Effect of the Payload Offset on the Vehicle Handling Properties", Proceedings of Chassis Division of the KSAE, pp. 2-3.
  3. Y. W. Kim, 2006, "The Effect of Roof Loading on Vehicle Dynamic Characteristics", Proceedings of the KSAE Annual Fall Conference, pp. 1086-1091.
  4. T. D. Gillespie, 2004, "Fundamentals of Vehicle Dynamics", Society of Automotive Engineers Inc, pp. 166-170.
  5. S. J. Park, 2010, "Effect Analysis on Bump-Pass Simulation of Cruise Bus According to Input Current of MR-damper", Proceedings of the KSME Annual Spring Conference, pp. 34-38.
  6. H. Y. Kang, 2001, "Evaluation on the Handling Performance of A Large Sized Truck", Proceedings of the KSAE Annual Fall Conference, pp. 872-877.
  7. Y. R. Kim, C. Park and G. N. Wang, 2012, "A Fundamental Study on the Control of Ride Comfort and Attitude for In-wheel Motor Vehicles", The Korean Society for Power System Engineering, Vol. 16, No. 1, pp. 91-97. https://doi.org/10.9726/kspse.2012.16.1.091
  8. T. H. Kang and W. K. Back, 2002, "Ride Analysis of A Semi-Active Suspension Seat with Sky-Hook Control", The Korean Society for Power System Engineering, Vol. 6, No. 2, pp. 33-39.