• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.475-480
• /
• 2000

The transient dynamic-response analysis of fuel-storage tanks of flying vehicles accelerating in the vertical direction is achieved with finite element method. A fuel-storage tank is a representative example of the fluid-structure interaction problem, in which structure and fluid media interact strongly. For the accurate analysis of this complicated fluid-structure system, we employed ALE(arbitrary Lagrangian-Eulerian) coupling method. Two types of fuel-storage tanks, one with two baffles and the other without baffle, are considered to examine the effect of baffles. The fuel-storage tank with baffles shows more uniform hydrodynamic pressure distribution, resulting effective stress in structural region and faster convergence from transient to steady states. MSC/Dytran, a commercial FEM software for the 3D coupled dynamic analysis, is used for this analysis.

• Preventive Nutrition and Food Science
• /
• v.11 no.3
• /
• pp.237-242
• /
• 2006

The pattern of volatile emissions from white ginseng powders (WGP) that were treated with selected preservatives was investigated during 5-months of storage (at -10 and $25^{\circ}C$) by an electronic nose system equipped with 12 metal-oxide sensors. WGP were treated with gamma radiation at 5 kGy, commercial methyl bromide (MeBr), and phosphine fumigations. Electronic nose differentiated the volatile patterns of the WGP with each different preservative treatment. In addition, each volatile pattern was affected by both storage time (1, 2 and 5 months) and temperature (-10 and $25^{\circ}C$). After 5-months of storage, the least change of volatile patterns was observed from WGP fumigated with phosphine at $-10^{\circ}C$. The result also showed that volatile changes in WGP were much more affected by storage time than by storage temperature.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.905-907
• /
• 1993

Demand for electricity is increasing annually. Especially, the daytime demand grawth shows higher than any other time period. So the big difference between maximum and minimum electrical demand becomes another important problem to be solved. The Battery Energy Storage System is chosen as one of the solutions among the sevral methods. The purpose of utilization of Battery Energy Storage System is to improve the daily load factor. Also, Battery Energy Storage System may be used for the load levelling or the load shifting as well as the spinning reserve. Up to now, only the pumped hydro power plant system has been operated on the commercial basis, but this system has so many constraints such as site, environmental effects, construction period, ect. Being considered current electrical power situation the development of electric storage system is in need latly. Among the various electric storage systems, Battery Energy System is chosen with the top priority because it has sevral merits to cover such as the short construction period, the demand site installation, and the food environmental characteristics.

• International Journal of Computer Science & Network Security
• /
• v.24 no.6
• /
• pp.171-179
• /
• 2024

Decentralized energy production without greenhouse gas emissions from renewable energy sources despite their advantage and environmental impact suffers from the problem of intermittent and fluctuating supply depending on weather conditions. To overcome this problem, energy storage is essential to enable reliable and continuous supply of the load. Hydrogen is one of the most promising energy storage solutions because it is easily transportable and can be used as fuel or as a raw material for the production of other chemicals.In this article, we will focus on hydrogen energy storage techniques using photovoltaic systems. We will review the different types of hydrogen storage structuresfor several applications, including residential and commercial buildings, as well as industry and transportation (electric vehicles using PEFMC fuel cells).

• Food Science and Preservation
• /
• v.7 no.1
• /
• pp.29-32
• /
• 2000

Storage life of grape cultivars including Kyoho(Inzuka), which were imported from Japan and are cultivated after adoption as farming application, were examined. The stu요 was accomplished with grapes packed by PE film under storage temperature $0^{\circ}C$ and humidity 90%RH loss of weight, Weight loss and occurrence of abnormal fruit increased in proportion to storage days. Abnormal fruits of Kyoho(izuka), North Black , and Seto giants increased rapidly after 60 days of storage, resulting in slight deterioration of commercial value. Similarly, this phenomenon of Campbell early , Takasumi , and Aki Queen occurred after 70 days of storage. External appearance decreased rapidly after 60 days of storage, resulting in 7.0 index of Takatsuma and Aki Queen , 3.0-3.6 of North Black and Seto Giants, and 5.0 of Campbell Early, kyoho (izuka0, and takasumi after 80 days of storage. Soluble solide content and titratable acidity showed a trend to be decreased with lapse of storage. Sugar/acid ratio shwoed much fluctuation between different grapes. Possible storage days, in view of more 70% merchandise berry ratio, were 90 days of Takatsuma and Aki Queen , 70 days of Campbell Early, 60 days of Takasumi , kyoho(Iizuka), and Seto giants, below 60 days of North Black.

• Transactions of the Society of Information Storage Systems
• /
• v.8 no.2
• /
• pp.50-55
• /
• 2012

Optical disks are widely used in libraries and archives as digital data media due to their long-term storage stability. Though archive-grade optical disks are already available on the market, there is a relative less focusing on the reliable recording conditions. Commercial BD-R media were recorded at various recording speeds with the maximum speed of 6X, and tested at the acceleration aging conditions. Through the evaluation of long-term storage features by the data stability test, lower recording speed of 2x resulted in better long-term storage stability. In addition, degradation aspects of unstable long-term storage feature at outer region of disk were discussed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.10
• /
• pp.2647-2656
• /
• 1995

The present work was performed to axially and radially investigate the local cold storage performance in the cylindrical tank with the spherical capsules inserted n-Tetradecane as a new cold storage material. The local cold storage performance of the capsules in the tank was experimentally investigated for the inlet temperature of -7, -5, -3, 0.deg. C, for the flow rate of 0.95, 1.89, 2.84, 6.00 l/min, and for the diameter ratio of 4.9, 9.0, 13.1. The local cold storage performance in the case of using water applied for the commercial ice-ball system was axially investigated by changing the flow rate only with the inlet temperature of -7.deg. C and the diameter ratio of 9.0 in order to compare with the performance in the case of using n-Tetradecane. For the case of using n-Tetradecane, the difference of cold storage period between the first and the seventh story was increased as the inlet temperature was increased and the flow rate was decreased. The capsules at the center of the tank showed the supercooling and the increased cold storage period compared with the capsules at the wall of the tank due to the small porosity and insufficient cold storage performance at the center of the tank as the diameter ratio is increased. The case using water showed worse cold storage performance due to comparatively large supercooling than the case using n-Tetradecane.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.1
• /
• pp.1-4
• /
• 2007

The dried persimmons is produced fungi and develop browning, hardening in circulation at normal temperature. To resolve such problem in commercial value preservation, the research was conducted to measure the quality changes of dried persimmons packagings at low temperature($0^{\circ}C$) during 160 days storage and the normal temperature($15^{\circ}C$) during 100 days storage. The rate of weight loss, fungi, browning, hardening were changed a little in the low temperature($0^{\circ}C$) storage and N/LDPE.

• Journal of Electrochemical Science and Technology
• /
• v.9 no.2
• /
• pp.157-162
• /
• 2018

In the study, herbaceous biomass waste including giant miscanthus, corn stalk, and wheat stalk were used to prepare commercially valuable activated carbons by KOH activation. The waste biomass predominantly consists of cellulose/hemicellulose and lignin, in which decomposition after carbonization and activation contributed to commercially valuable specific surface areas (>$2000m^2/g$) and specific capacitances (>120 F/g) that exceeded those of commercial activated carbon. The significant electrochemical performance of the herbaceous biomass-derived activated carbons indicated the feasibility of utilizing waste biomass to fabricate energy storage materials. Furthermore, with respect to both economic and environmental perspectives, it is advantageous to obtain activated carbon from herbaceous biomass waste given the ease of handling biomass and the low production cost of activated carbon.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.768-773
• /
• 2009

A numerical study has been performed to investigate the thermal Performance of Solar heating system with baffle type of storage tank by using the commercial code TRNSYS. As a result, the solar fraction depends strongly on the efficiency and heat loss coefficient of solar collector as well as the heating capacity of house and the water temperature supplied to the shower. In addition, the solar fraction has been basically ranked to higher level in baffle type of storage tank than typical type of single storage tank for the range of operation condition.