• 한국추진공학회지
• /
• 제24권3호
• /
• pp.71-80
• /
• 2020

발사체 분석을 위한 CFD 소프트웨어인 LVAFoam을 개발하기 앞서 발사체의 연소기, 터보 펌프 및 외부유동의 시뮬레이션에 사용된 해외의 인하우스 CFD 소프트웨어 및 상용 CFD 소프트웨어에 대한 조사를 수행하였다. 인하우스 소프트웨어로는 NASA, 미시시피 주립대학, DLR, Bertin Technologies & CNES, CERFACS 및 JAXA의 솔버들과, 상용 소프트웨어로는 FLUENT, CFX, Adavance/FrontFlow/red, GASP, CRUNCH CFD, CFD-ACE+, FINE^TM/Turbo, STAR-CCM+ 의 솔버들을 정리하였다. 발사체 분석을 위한 각 소프트웨어의 계산 사례가 제시되었으며, 개발된 LVAFoam이 간략하게 소개되었다.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.645-652
• /
• 2000

A method for shape design sensitivity analysis is proposed utilizing commercial software ANSYS for thermal conduction problems. While the sensitivity formula is derived analytically by introduing adjoint variable concept, sensitivity calculation in practice as well as the primal and adjoint solution of thermal conduction is performed using the ANSYS very easily. Since the formula always takes boundary integral form, sensitivity evaluation in ANSYS requires a little more addition of post-processing routine which involves evaluation of boundary variable from the obtained solution. Though the BEM has been used as a better tool for this purpose, the present study shows it can also be calculated using any kind of analysis code such as ANSYS since the formula is based on analytic nature. Therefore the present study provides a new and efficient way of optimization which was not possible before using commercial software. The usefulness of the method is illustrated via a weight minimization problem of thermal diffuser.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권1호
• /
• pp.1-12
• /
• 2019

In this paper, we implement a navigation software of a Global Navigation Satellite System (GNSS) receiver based on a commercial purpose GNSS software receiver platform and verify its performance by performing experimental tests for various GNSS signals available in Korea region. The SX3, employed in this paper, is composed of an application program and a Radio Frequency (RF) frontend, and can capture and process multi-constellation and multi-frequency GNSS signals. All the signal processing procedure of SX3 is accessible by the receiver software designer. In particular for an easy research and development, the Application Programing Interface (API) of the SX3 has a flexible architecture to upgrade or change the existing software program, equipped with a real-time monitoring function to monitor all the API executions. Users can easily apply and experiment with the developed algorithms using a form of Dynamic Link Library (DLL) files. Thus, by utilizing this flexible architecture, the cost and effort to develop a GNSS receiver can be greatly reduced.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1340-1345
• /
• 2003

In this paper, an integrated optimal design software system for structural components has been developed which interfaces existing commercial codes for CAD, CAE and Optimization. They include specialized optimal design software codes such as iSIGHT and VisualDOC, optimization module imbedded in CAD software developed by CAD developers, and optimal design software systems based on API of commercial CAD software. The advantages of the CAD imbedded optimal design approach and those of specialized optimal design software are taken to develop the system. The user defines optimal design formulation in the user interface for problem definition in the CAD control stage, where design variables are directly selectable from the CAD model and various properties and performance functions defined. The commercial CAD codes, Open I-DEAS are used for the development. The resulting software is minimally connected to CAD and CAE systems while keeping maximum independence from each other. This assures flexibility and freedom for problem definition. Fatigue life optimization is taken as a nontrivial application area. As a specific example, the shape design of a knuckle part of an automobile is performed, where the minimum fatigue life over the material domain in terms of the number of cycles of a curb strike are maximized under the constraint of not exceeding the current mass. The fatigue life has been improved by four times of the initial life. The developed software is illustrated to maintain the advantages of existing optimal design software systems while improving independency and flexibility.

• Journal of Ship and Ocean Technology
• /
• 제5권4호
• /
• pp.1-18
• /
• 2001

Software written in academic environments is rarely integrated and/or reused. Moreover, typical academic software products do not communicate with commercial CAD packages, consequently functionality that is readily available to industry is not available do academic researchers. The Surface Design Library (SDL) is a library serving as a framework under which, CAGD software, intended for research or educational use, can be written in such a manner that it becomes a reusable part of a useful CAGD system. Moreover SDL is equipped with an IGES translator so that it communicates with commercial CAD packages, This paper gives a brief overview to SDL and presents examples of using it for high quality fairing performed on a naval ship hull, before employing commercial CAD packages for further design and analysis.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.437-444
• /
• 2004

In this study, an optimum support design problem is considered to minimize displacement of stacked plates under self weight condition. During the displacement analysis, several kinds of contact arise between the plates themselves and support bar. These can be easily considered if commercial analysis software, which provides capability to solve the contact problem, is used. It is found, however, that the computing time is extraordinarily long due possibly to the generality of the software and also to the ignorance of the control parameters used in the software. In this paper, the contact condition is imposed directly by the authors, while the software is used only to solve the ordinary displacement analysis problem. In this way, the computing time is decreased remarkably by more than 30 times, while yielding the same accurate results. Optimization is conducted based on this efficient analysis method to find minimum number of supporting bars using the response surface algorithm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.120-125
• /
• 2001

A general purpose fatigue analysis software to predict fatigue lives of mechanical components and structures was developed. This software has some characteristic features including functions of searching weak regions on the free surface in order to reduce computing time significantly, a database of fatigue properties for various materials. and an expert system which can assist any users to get more proper results. This software can be used in the environment consists of commercial finite element packages. Using the software developed fatigue analyses for a SAE keyhole specimen and an automobile knuckle were carried out. It was observed that the results were agree well with those from commercial packages.

• 한국정보시스템학회지:정보시스템연구
• /
• 제27권4호
• /
• pp.35-70
• /
• 2018

Purpose Recently, 3D factory simulation technology has emeged as a powerful tool for modeling and analysis of a wide range of production systems, however, it has been not paid much attention in Korea. In this context, this paper aims to provide a comprehensive literature review on discrete event simulation softwares and introduce a promising 3D factory simulation software called FlexSim and its application domains. Design/methodology/approach In order to demonstrate worldwide popularity and technical superiority of FlexSim software, we analyzed the recent list of rankings for commercial discrete simulation softwares released by winter simulation conference and users' opinions collected from business software review site. Moreover, several main application domains are derived from a review of the previous research papers that deal with applications of FlexSim software. Findings FlexSim software recently moved up the list of major commercial simulation softwares, and technical superiorities of the software demonstrate that it is a promising tool for practical 3D factory simulation. Moreover, recent research papers suggest that FlexSim software can be used as a component of smart factory system. In this context, it is expected that FlexSim software becomes more popular in the era of industry 4.0.

• 한국기계가공학회지
• /
• 제20권5호
• /
• pp.8-16
• /
• 2021

This study develops a shaft analysis model for the optimization of the power transmission system. The finite element method was used for the shaft analysis model. The shaft and gear were assumed Timoshenko beams. Strength was evaluated according to DIN 743, and gear misalignment was calculated through ISO 6336 and the coordinate system rotation. The analysis software for a power transmission system was developed using Visual Studio 2019. The analysis results of the developed program were compared with those of commercial software (MASTA, KISSsoft, and Romax). We confirmed that the force, deformation, and safety factors at each node were the same as those of the commercial software. The absolute value of the gear misalignment of the developed program and commercial software was different. However, the gear misalignment tended to increase with increasing the displacement in the tooth width direction.

• 신재생에너지
• /
• 제6권2호
• /
• pp.5-11
• /
• 2010

This paper reviews three commercial softwares for wind climate data analysis in wind resource assessment; WAsP/Observed Wind Climate, WindRose and Windographer. Windographer is evaluated as the best software because of its variety of input data format, analysis functions, easiness of user interface, etc. For a quantitative understanding of uncertainty depending on software selection, a benchmark is carried out with the met-mast observation dataset at the Gimnyeong Wind Turbine Performance Test Site. It is found that Weibull parameter calculation and air density correction have a dependency on the software so that such uncertainty should be considered when an analysis software is selected. It is confirmed that annual energy production calculated by WAsP using a statistical table of frequency of occurrence may have some error compared to a time-series calculation method used by the other softwares.