• 한국유체기계학회 논문집
• /
• 제19권3호
• /
• pp.5-9
• /
• 2016

The purpose of this paper is to define criteria to be used as part of the engineering design for an oil sands plant equipped with the steam assisted gravity drainage process. In this effort, the oil treatment process of an oil sands plant on a pilot scale was focused for detailed investigation. The thermodynamic properties of the process fluid, which is mainly composed of bitumen and water, were estimated with the CPA model. The commercial tool aspen HYSYS was used for the analysis throughout this work along with the provided input data and some necessary assumptions. From the simulation results, the heat and mass balances for a 300 BPD plant were established in order to define standard data for its modular design. In particular, the basis of design for equipment size, heat transfer areas, capital cost and operation cost was extensively discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.147-153
• /
• 2014

The centrifugal oil purifier is used in an engine for lubrication and to remove impurities. The momentum needed for the rotation of the cylindrical chamber is obtained by jet injections. An impure particle in the oil is separated by the centrifugal forces moving to the inner wall of the rotating cylindrical chamber body. The dust particles are eliminated when the particles are absorbed onto the surface of the inner wall of the chamber body. The flow characteristics and the physical behaviors of particles in this centrifugal oil purifier were investigated numerically and the filtration efficiencies was evaluated. For calculations, a commercial code is used and the SST (Shear Stress Transport) turbulence model has been adopted. The MFR (Multi Frames of Reference) method is introduced to consider the rotating effect of the flows. Under various variables, such as particle size, particle density and rotating speed, the filtration efficiencies are evaluated. It has been verified that the filtration efficiency is increased with the increments in the particle size, the particle density and the rotating speed of the cylindrical chamber.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.209-214
• /
• 2002

Computations were performed to investigate the flow, temperature and pollutants in two stage heavy-oil combustion burner. The burner geometry and flow conditions were provided by a burner company. The goal of the study is to understand combustion phenomena according to each air inlet's velocity, excessive air ratio and air temperature through CFD. Air flow rates at two inlets are adjusted by a damper inside a burner. Here, injection conditions of liquid fuel are kept constant throughout all simulations. This assumption is made in order to limit the complexity of oil combustion though it may cause some disagreement. The final goal of this research is to design a Low-NOx heavy oil combustion burner through comparison between computational study and experimental ones. Besides experiments, simulation works can give us insights into heavy oil combustion and help us design a Low NOx burner while saving time and cost. The computational study is based on k-e model, P-1 radiation model(WSGGM) and PDF, and is implemented on a commercial code, FLUENT.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.819-823
• /
• 1995

The oil-based magnetic fluids were sysnthesized using ultra-fine $Fe_{3}O_{4}$ powder dispersed in hydrocarbon oil. To synthesize ultra-fine $Fe_{3}O_{4}$, we carried out the experiments varying the pH of reacting medium and the initial concentration of $Fe^{2+}$. We also investigated the amount of oleic acid to obtain a stable dispersion and the proper base oil of MF for loudspeaker application. The limits of adsorbed amount of oleic acid on the $Fe_{3}O_{4}$ surface were approximately 35~40 percents of the total magnetite weight. As the $Fe_{3}O_{4}$ content increased from 0.1g/cc to 0.6g/cc, the viscosity of oil-based magnetic fluid increased from 1,063cP to 1,828cP, and its saturation magnetization at 10kOe increased from 66G to 242G. When we tested the MF sample to a commercial speaker, improvements were noted.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.371-379
• /
• 2021

The use of anti-corrosive oil (AC) is inevitable for production of industrial steels to prevent corrosion. The AC is degreased before application of steels, which crucially effects on final products, such as automobile, electricity etc. However, qualitative/quantitative evaluation of degreasing performance are steal insufficient. In this study, degreasing performance of anti-corrosive oil on steel have been studied through X-ray photon spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). Commercial automotive steels (AMS) are coated with 4 different anti-corrosive oils (namely AC1-AC4). In XPS, intensity of C1s peak remained after degreasing indirectly indicates incomplete degreasing. Thus, higher C1s peak intensity means less effective degreasing by degreasing agent. peak intensity of C1s peak shows opposite tendency of peak intensity of O1s. We found that EIS analysis is not applicable to mild steel (such as AMS1) due to corrosion during measurement. However, alloy steel can be fully analyzed by EIS and XPS depth profile.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권2호
• /
• pp.809-820
• /
• 2021

The study aimed to investigate the impact of sectoral bank credit facilities provided by commercial banks on the non-oil economic growth in Saudi Arabia. Bank credit facilities are given for nine economic sectors: agriculture, manufacturing, mining, electricity and water, health services, construction, wholesale and retail trade, transportation and communications, services, and finance sector. The study employs annual data from 1970 to 2019. The study employs the Autoregressive Distributed Lag (ARDL) approach to identify the long-run and short-run dynamics relationships among the variables. The main results reveal that the overall impact of total bank credit has a significant and positive effect on non-oil economic growth in KSA. The results revealed that the effect of bank credit on the non-oil GDP growth in the short and long run was uneven. The study finds that all sectors have a positive and significant impact in the long run, except for the agricultural and mining sectors. Likewise, all sectors have a positive and significant impact in the short run, except for construction, finance, services, and transportation & communications. As a result, bank credit facilities in different sectors have played an important role in enhancing the non-oil economic growth in the KSA.

• 한국BIM학회 논문집
• /
• 제11권2호
• /
• pp.43-53
• /
• 2021

The 'public agency oil joint purchase system' was introduced to lower public sector oil prices and contribute to the stability of the overall consumer oil market. The present study used spatial regression to analyze the factors affecting domestic gasoline price, focusing on the impact of potential implicit collusion among gas stations in determining domestic gasoline prices. Also, this study investigated the effect the location characteristics of the market convention gas stations and government offices on the pressure of price competition in the market and the gasoline price at general gas stations. To summarize the results of the spatial lag model (SLM), the individual characteristics of gas stations such as convenience stores (+), self-fuelling (-), commercial areas (+), subway stations (+), population density (-), and sales (-) are correlated to gasoline prices at gas stations, and the institutional location factors of gas stations (+) affected the average of 9 won per liter, 11 won per liter. In order to solve these problems, the establishment of a monitoring system reflecting the location characteristics of the region and the ongoing review of the system should be carried out. In addition, separate, expanded and promotional measures should be prepared for the convenience of general and public oil buyers.

• 대한본초학회지
• /
• 제37권6호
• /
• pp.53-59
• /
• 2022

Objectives : Cleanser is the most basic tools used in daily skin care. I made a cold process soap using Castanea crenata inner shell (CCIS). I'd like to study the effect of face wash using CCIS cold process (CP) soap on the skin. Methods : The same water and towel were used at the same place in order to examine the skin change state immediately before and after washing face. The skin test was performed before and after 10 minutes washing the face in order to remove these external environmental factors, such as lifestyle, alcohol, tobacco, and stress etc. As a control group, the cases of washing with water and foam cleanser (F/C), which is a popular commercial product, were set. Three cases were compared and analyzed. Results : In the case of water washing, there was a significant decrease in oil (U-zone) but that was not good effect. In the case of F/C and CCIS washing, there were significant decrease in oil (T-zone), pores and pigmentation, but the significance was bigger in CCIS washing. In the case of pores, there was a significant decrease in all three cases. Conclusion : In the case of F/C and CCIS washing, it showed the effect of reducing T-zone oil, pores and pigmentation. But the significance was greater in CCIS case than in F/C case. CCIS cp soap is considered as a form of face wash that is suitable for skin care.

• 한국식품영양과학회지
• /
• 제38권3호
• /
• pp.338-345
• /
• 2009

미강유(RBO), 팜스테아린(PS), 고올레인산 해바라기씨유(HO)를 기질로 사용하여 24 hr, $65^{\circ}C$의 조건하에 회분식 반응기(batch type reactor)에서 TLIM을 이용한 interesterification을 통해 생성된 저트랜스 쇼트닝의 이화학적 특성을 살펴보았다. DSC 분석결과를 살펴보면, SFC 함량 변화는 commercial shortening과 low-trans shortening(LTS) 간에 거의 유사하게 측정되었고, slip melting point는 각각 35.5, $34.8^{\circ}C$로 나타났다. 지방산 조성 분석 결과, LTS는 전체 지방산 조성의 90% 이상이 C16:0(33.7 wt%), C18:1(45.7 wt%), C18:2(13.4 wt%)로 구성되어 있으며 이 중 트랜스지방산은 시중 유통 쇼트닝보다 3배 이상 적은 0.5 wt%로 미량 검출되었다. Sn-2 position에 위치한 지방산 조성은 C16:0이 36.6 wt%, C18:1이 43.5 wt%로 나타났다. LTS의 주요 TAG 조성으로는 POO, POP, PLO 등으로 나타났고, 반응 전과 반응 후의 TAG 조성을 비교해 보면, OOO와 PPP의 area%는 각각 27.65에서 6.97 area%로, 11.97에서 3.36 area%로 감소한 반면 POO는 15.94에서 29.05 area%로, PLO는 6.44에서 13.05 area%로 증가되었다. ${\alpha},\;{\gamma}\;{\delta}$-Tocopherol 분석 결과 LTS의 total tocopherol은 12.37 mg/100 g, ${\gamma}$-oryzanol 함량은 0.43 mg/100 g을 나타냈으며, total phytosterol 함량은 251.38 mg/100 g으로 나타났다. Commercial shortening과 LTS의 texture analyzer를 통한 hardness 측정 결과, commercial shortening은 157.41 g, LTS는 157.00 g으로 두 시료의 hardness가 비슷하게 측정되었다. LTS의 polymorphic form을 측정하기 위해 x-ray duffraction을 사용하였다. 일반적으로 쇼트닝이나 마가린은 ${\beta}'$형 결정일 때 바람직하다고 여겨지는데, LTS의 분석 결과 ${\beta}$형이 함께 공존하고 있지만, ${\beta}'$형이 우세하게 나타났다.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.61-67
• /
• 2015

As the production of palm oil has been increased, the generation of oil palm biomass is also increased and the utilization of the oil palm biomass become more significant topic. One third of the oil palm biomass is empty fruit bunch (EFB) and the other two thirds are oil palm trunks and fronds. However, the effective use of oil palm biomass has not been developed and most of it is discarded near oil palm plants. In this study, we investigated the applicability of EFB to the paperboard mills, as an organic filler. The new organic filler was manufactured in a laboratory by grinding and fractionating dried EFB powder, and its properties were analyzed. The particles of EFB organic filler were larger and more spherical than those of the commercial wood powder. The use of EFB organic filler resulted in a higher bulk of the handsheets with similar trends of physical strength, compared to those made with wood powder. It was concluded that EFB could be used as a raw material to manufacture organic filler for paperboard production.