• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.5
• /
• pp.619-627
• /
• 2021

Recent advance in low cost and light-weight drones has extended their application areas in both military and private sectors. Accordingly surveillance program against unfriendly drones has become an important issue. Drone detection and classification technique has long been emphasized in order to prevent attacks or accidents by commercial drones in urban areas. Most commercial drones have small sizes and low reflection and hence typical sensors that use acoustic, infrared, or radar signals exhibit limited performances. Recently, artificial intelligence algorithm has been actively exploited to enhance radar image identification performance. In this paper, we adopt machined learning algorithm for high resolution radar imaging in drone detection and classification applications. For this purpose, simulation is carried out against commercial drone models and compared with experimental data obtained through high resolution radar field test.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.168-173
• /
• 2016

The latest drone market is evolving rapidly. The commercial drone market developed rapid growth. Up to now, one controller had controlled the only one drone. So Remote control and information collection of the remote drone was impossible. Therefore we suggests drone intercommunication distributed network based on the MANET. Subsequently classified according to the characteristics of the drone intercommunication distributed network(speed, distance, applications) and chose a MANET routing protocol in accordance with the classification result.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.491-499
• /
• 2020

There are policies that foster the drone industry, which either put a legal precedent on drones through the "Drone Act" or grant a delay or exemption in applying the safety measures of "the Aviation Safety Act". Yet, the definition of a drone is unclear, requiring further discussion on commercial usage. Therefore, we have studied cases domestically and abroad, and also analyzed issues with the current aviation legislation. It was found that a drone is defined as "an unmanned aircraft where a pilot is not on board, and its net weight is 150 kg or less". However, there are several issues, such as that a drone taxi requires a pilot on board, and its weight is 150 kg or more. Thus, we propose to define a drone as "an unmanned aerial vehicle (provided, that its own net weight should be 300 kg or under, or not be limited to weight) under Article 2 (3) of the "Aviation Security Act" as prescribed by Ordinance of the Ministry of Land, Infrastructure, and Transport, which operates either by remote, automatically, or autonomously; or an unmanned aircraft under Article 2 (6) of the "Aviation Security Act".

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.2
• /
• pp.359-363
• /
• 2019

As commercial drones have been widely used, concerns for collision accidents with people and invading secured properties are emerging. The detection of drone is a challenging problem. The deep learning based object detection techniques for detecting drones have been applied, but limited to the specific cases such as detection of drones from bird and/or background. We have tried not only detection of drones, but classification of different drones with an end-to-end model. YOLOv2 is used as an object detection model. In order to supplement insufficient data by shooting drones, data augmentation from collected images is executed. Also transfer learning from ImageNet for YOLOv2 darknet framework is performed. The experimental results for drone detection with average IoU and recall are compared and analysed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.10
• /
• pp.5078-5094
• /
• 2019

In recent years, the development of drone technologies has promoted the widespread commercial application of drones. However, the ability of drone to carry explosives and other destructive materials may bring serious threats to public safety. In order to reduce these threats from illegal drones, acoustic feature extraction and classification technologies are introduced for drone sound identification. In this paper, we introduce the acoustic feature vector extraction method of harmonic line association (HLA), and subband power feature extraction based on wavelet packet transform (WPT). We propose a feature vector extraction method based on combined HLA and WPT to extract more sophisticated characteristics of sound. Moreover, to identify drone sounds, support vector machine (SVM) classification with the optimized parameter by genetic algorithm (GA) is employed based on the extracted feature vector. Four drones' sounds and other kinds of sounds existing in outdoor environment are used to evaluate the performance of the proposed method. The experimental results show that with the proposed method, identification probability can achieve up to 100 % in trials, and robustness against noise is also significantly improved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.10
• /
• pp.1247-1255
• /
• 2016

The safety and autonomous flight function of micro UAV or drones is crucial to its commercial application. The requirement of own building stable drones is still a non-trivial obstacle for researchers that want to focus on the intelligence function, such vision and navigation algorithm. The paper present a GCS using commercial drone and hardware platforms, and open source software. The system follows modular architecture and now composed of the communication, UI, image processing. Especially, lane-keeping algorithm. are designed and verified through testing at a sports stadium. The designed lane-keeping algorithm estimates drone position and heading in the lane using Hough transform for line detection, RANSAC-vanishing point algorithm for selecting the desired lines, and tracking algorithm for stability of lines. The flight of drone is controlled by 'forward', 'stop', 'clock-rotate', and 'counter-clock rotate' commands. The present implemented system can fly straight and mild curve lane at 2-3 m/s.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.9
• /
• pp.28-34
• /
• 2021

The Fourth Industrial Revolution has led to the development of drones for commercial and private applications. Therefore, the malfunction of drones has become a prominent problem. Failure mode and effect analysis was used in this study to analyze the primary cause of drone failure, and blade breakage was observed to have the highest frequency of failure. This was tested using a vibration sensor placed on drones along the breakage length of the blades. The data exhibited a significant increase in vibration within the drone body for blade fracture length. Principal component analysis was used to reduce the data dimension and classify the state with machine learning algorithms such as support vector machine, k-nearest neighbor, Gaussian naive Bayes, and random forest. The performance of machine learning was higher than 0.95 for the four algorithms in terms of accuracy, precision, recall, and f1-score. A follow-up study on failure prediction will be conducted based on the results of fault diagnosis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.355-358
• /
• 2016

Recently, As the interest of the drone has increased the fields such as broadcasting, disaster site and leisure which uses the drone has been constantly expanded. However, an invasion of a person's privacy and a threat of hacking attack also have increased as population of drone. High-resolution cameras mounted on drones can take a photo or real-time video anytime and anywhere. It causes the invasion of privacy from private houses, buildings, and hotels. In this paper, we perform a security vulnerability assessment tests on the camera's from common commercial drones and we propose the countermeasures to protect the drones against unauthorized attacker who attempts to access the drone's camera from internal or external. Through this research, we expect the Aviation Act and legislation accept the concept of security and provide the polices such as drones equipped with security devices from the production stage to promote drone industry.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.1
• /
• pp.112-122
• /
• 2024

Recently, as unmanned aerial vehicle technology such as drones has developed, there are many environmental, social and economic benefits, but if there is malicious intent against important national facilities such as airports, public institutions, power plants, and the military, it can seriously affect national safety and people's lives. It can cause damage. To respond to these drone threats, attempts are being made to introduce detection equipment such as RF scanners. In particular, power transmission towers installed in substations, power plants, and Korea's power system can affect detection performance if the transmission tower is located in the RF scanner detection path. In the experiment, a commercial drone was used to measure the signal intensity emitted from the drone and confirm the attenuation rate. The average and maximum attenuation rates showed similar trends in the 2.4 GHz and 5.8 GHz bands, and were also affected by the density of the structure.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.10
• /
• pp.473-478
• /
• 2017

Drones require altitude holding in order to achieve flight objectives. The altitude holding of the drone is to repeat the operation of raising or lowering the drone according to the altitude information being measured in real-time. When the drones are maintained altitude, the drone's altitude will continue to change due to external factors such as imbalance in thrust due to difference in motor speed or wind. Therefore, in order to maintain the altitude of drone, we have to exactly measure the continuously changing altitude of the drone. Generally, the acceleration sensor is used for measuring the height of the drones. In this method, there is a problem that the measured value due to the integration error accumulates, and the drone's vibration is recognized by the altitude change. To solve the difficulty of the altitude measurement, commercial drones and existing studies are used for altitude measurement together with acceleration sensors by adding other sensors. However, most of the additional sensors have a limitation on the measurement distance and when the sensors are used together, the calculation processing of the sensor values increases and the altitude measurement speed is delayed. Therefore, it is necessary to accurately measure the altitude of the drone without considering additional sensors or devices. In this paper, we propose a measurement algorithm that improves general altitude measurement method using acceleration sensor and show that accuracy of altitude holding and altitude measurement is improved as a result of applying this algorithm.