• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.257-264
• /
• 2003

Tunnelling in water bearing soils influences the ground water regime. It has been indicated in the literature that the existence of ground water above a tunnel influences tunnel stability and the settlement profile. Only limited research, however, has been done on ground water movements around tunnels and their influence on tunnel performance. Time dependent soil behaviour can be caused by the changes of pore water pressure and/or the viscous properties of soil(creep) under the stress change resulting from the advance of the tunnel face. De Moor(1989) demonstrated that the time dependent deformations due to tunnelling are mainly the results of pore pressure dissipation and should be interpreted in terms of effective stress changes. Drainage into tunnels is governed by the permeability of the soil, the length of the drainage path and the hydraulic boundary conditions. The potential effect of lime dependent settlement in a shallow tunnel is likely to occur rapidly due to the short drainage path and possibly high coefficient of consolidation. Existing 2D modelling methods are not applicable to these tunnelling problems, as it is difficult to define empirical parameters. In this paper the time-based 2D modelling method is adopted to account for the three dimensional effect and time dependent behaviour during tunnel construction. The effect of coupling between the unloading procedure and consolidation during excavation is profoundly investigated with the method. It is pointed out that realistic modelling can be achieved by defining a proper permeability at the excavation boundary and prescribing appropriate time for excavation Some guidelines for the numerical modelling of drained and undrained excavation has been suggested using characteristic time factor. It is highlighted that certain range of the factor shows combined effect between the unloading procedure due to excavation and consolidation during construction.

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.15-20
• /
• 2014

The wind industry grew in the first decade of the 21st century at rates consistently above 20% a year. For wind turbine, gearbox failure can be extremely costly in terms of repair costs, replacement parts, and in lost power production due to downtime. In this paper, gear tooth micro-modification for the high speed stage was used to compensate for the deformation of the teeth due to load and to ensure a proper meshing to achieve an optimized tooth contact pattern. The gearbox was firstly modeled in a software, and then the various combined tooth modification were presented, and the prediction of transmission under the loaded torque for the helical gear pair was investigated, the normal load distribution and root stress were also obtained and compared before and after tooth modification under one torque. The simulation results showed that the transmission error and normal load distribution under the load can be minimized by the appropriate tooth modification. It is a good approach where the simulated result is used to improve the design before the prototype is available for the test.

• 컴퓨터교육학회논문지
• /
• 제18권6호
• /
• pp.43-51
• /
• 2015

본 논문의 목적은 진로 상담 분야에서 직접 코치와 학습자가 만나서 확인하고 상담하는 면대면 코칭과 인터넷을 통해 코치와 학습자가 상담하는 E-코칭을 조합한 하이브리드 진로코칭 모형을 개발하고 대학생들의 진로 지도에 적용하고 그 효과를 분석하는데 있다. 하이브리드 진로코칭에서는 프로파일, 적성 검사 등 인터넷 상에서 원격 접속하여 수행 가능하고 데이터 저장이 필요한 것은 E-코칭으로 처리하고, 점검, 상담 및 성찰 등 학생의 상황을 파악하고 대화가 필요한 부분은 면대면으로 설계하였다. 제안한 하이브리드 진로코칭 모형은 진로코칭 안내, 자기이해, 진로의사결정, 진로실행계획 수립, 실행계획 및 실행의지 점검, 실행결과 점검 6단계로 나누어 진행하였다. 하이브리드 진로코칭 모형을 대학생에게 적용하여 진로개발을 위한 인지적, 행동적 행동변화를 촉진하고 그 효과를 분석하였다. 연구 결과 진로준비행동이 높아졌으며, 코칭을 통해 자신의 현재 상태 분석과 실행 전략이 중요성 및 학습법과 자기조절능력 등을 획득하였다고 분석되었다. 이러한 결과를 토대로 이 연구에서 개발된 하이브리드 진로코칭 모형은 진로지도가 강화되는 대학에서 교수의 진로지도를 지원할 수 있을 것이라 기대된다.

• 분석과학
• /
• 제14권2호
• /
• pp.180-190
• /
• 2001

화합물에 포함된 냄새를 유발하는 물질은 다양한 성분으로 되어 있다. 냄새를 유발하는 휘발성 화합물의 분석에는 GC 또는 GC/MSD 등이 많이 사용된다. 그러나, 이들 분석기기는 전체 휘발성 성분의 profile이나 특정성분의 함량을 정량적으로 분석할 수는 있으나, 냄새를 유발하는 지배적인 성분이 무엇인지 파악하기가 어렵다. 이러한 문제점을 해결하기 위해 사용되는 방법에는 GC-Sniffing 또는 GC-Olfactometry법 등이 있다. 본 연구에서는 복합적인 냄새성분을 검출하기 위해 사람의 후각을 이용하는 olfactometry를 기존 GC에 결합시켜 분리컬럼에서 분리된 시료가 동시에 검출되는 GC/FID/Olfactometry를 개발하였다. FID와 ODP 신호간의 시간차이는 물질의 종류와 농도, 그리고 패널에 따라 다르게 나타났다. 일반적으로 휘발성과 냄새강도는 큰 물질일수록, 패널의 호흡주기가 짧을수록 두 신호간의 시간차이가 적었다. 그러므로, 정확한 냄새 원인물질의 규명에는 이들 신호의 관계에 대한 고찰이 필요하다.

• Smart Structures and Systems
• /
• 제20권3호
• /
• pp.311-328
• /
• 2017

The characteristics of boundary layers have significant effects on the aerodynamic forces and vibration of the wind turbine blade. The incorporation of active trailing edge flaps (ATEF) into wind turbine blades has been proven as an effective control approach for alleviation of load and vibration. This paper is aimed at investigating the effects of external trailing edge flaps on the flow pattern and velocity distribution within a boundary layer of a NREL 5MW reference wind turbine, as well as designing a new type of velocity sensors for future validation measurements. An aeroelastic-aerodynamic simulation with FAST-AeroDyn code was conducted on the entire wind turbine structure and the modifications were made on turbine blade sections with ATEF. The results of aeroelastic-aerodynamic simulations were combined with the results of two-dimensional computational fluid dynamic simulations. From these, the velocity profile of the boundary layer as well as the thickness variation with time under the influence of a simplified load case was calculated for four different blade-flap combinations (without flap, with $-5^{\circ}$, $0^{\circ}$, and $+5^{\circ}$ flap). In conjunction with the computational modeling of the characteristics of boundary layers, a bio-inspired hair flow sensor was designed for sensing the boundary flow field surrounding the turbine blades, which ultimately aims to provide real time data to design the control scheme of the flap structure. The sensor element design and performance were analyzed using both theoretical model and finite element method. A prototype sensor element with desired bio-mimicry responses was fabricated and validated, which will be further refined for integration with the turbine blade structures.

• Biomolecules & Therapeutics
• /
• 제1권2호
• /
• pp.211-219
• /
• 1993

The general and some pharmacological actions of DWP 302 were investigated in animals and the following results were obtained. In central nervous system, DWP 302 had no effects on the pentobarbital induced anaesthesia, locomotor activity, rotarod test, traction test, analgesic action in the mice and body temperature in the rat. DWP 302 showed no depressive action on the convulsion induced by strychnine and electronic shock. From these results, DWP 302 was considered to have no or little pharmacological effect on the central nervous system. Furthermore, DWP 302 had no influences on the normal blood pressure and heart rate. In the isolated ileum of guinea pig, DWP 302 showed neither contractive nor relaxing effects against the acetylcholine ($10^{-6}g/mι$), histamine ($10^{-6}g/mι$) and $BaCl_2$ ($10^{-4}g/mι$) at a concentration of $1.9{\times}10^{-4}g/mι$ in bath. But it caused a slight increase in basal tone at a concentration of $6.3{\times}10^{-4}g/mι$ and this effect was inhibited by atropine $10^{-7}g/mι.$ In the isolated trachea and vas deference, DWP 302 showed no effect on the contractions produced by histamine and norepinephrine, respectively. And DWP 302 showed no effect on the contractions produced by acetylcholine and oxytocin in the isolated nonpregnant rat uterus. DWP 302 had no effect on bile excretion, urine volume, pH and gastrointestinal motility, But, DWP 302 showed a significant inhibitory effect on gastric secretion in the rat.

• 대한간호학회지
• /
• 제27권4호
• /
• pp.901-911
• /
• 1997

The purpose of this study is to provide a basis for nursing intervention strategies to promote quality of life in cancer patients. Therefore the study is designed to evaluate the effectiveness of perceived health status, self-esteem, health locus of control, self-efficacy, perceived susceptibility /severity, health promoting behaviors, and hope for quality of life. The sample was composed of 164 stomach cancer patients who visited outpatient clinics at a university hospital in Seoul. The following instruments were used in the study after some adaptation : Lawstone and others' Health Self-rating Scale, Rosenberg's Self-esteem Scale, Wallston and others 'Multidimensional Health Locus of Control Scale, Sherer & Maddux's Self-efficacy Scale, Moon's Health Beliefs Scale, Walker and others' Health Promoting Lifestyle Profile, Nowotney's Hope scale and Noh's Quality of Life Scale. Data were analyzed using a SAS program for Pearson correlation coefficients, descriptive correlational statistics and stepwise multiple regression. The results are as follows : 1. The scores on the quality of life scale ranged from 115 to 243 with a mean of 177.84(SD : 25.35). The mean scores(range 1-5) on the different dimensions were : emotional state 3.37 : economic life 3.47 : physical state & function 3.52 : self-esteem 3.66 : relationship with neighbors 3.37 ; family relationships 3.80. 2. There was a significant correlation between all the predictive variables and the quality of life (r=.20-.65, p<.01). 3. Stepwise multiple regression analysis showed that : 1) Self-esteem was the main predictor of quality of life and accounted for 46.9% of the variance in quality of life. 2) Perceived health status, hope and perceived susceptibility/severity accounted for 11.8%, 8.3%, 1.5% of the variance in quality of life, respectively. 3) Self-esteem, perceived health status, hope & perceived susceptibility /severity combined accounted for 68.5% of the variance in quality of life. In conclusion, self-esteem, perceived health status, hope and perceived susceptibility / severity were identified as important variables in the quality of life of cancer patients.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.314-323
• /
• 2014

In this study, a gearbox and blade were modeled in the MASTA program, and the housing and carrier components were modeled using a finite element method. Using substructure synthesis, all the components were combined and used to establish a vibration model of a 2.5-MW wind turbine gearbox. In addition, the safety displacement factor was evaluated using an AGMA data sheet about bearing's outer race for the input shaft and output shaft. As a result, the bearing's outer race for the input shaft, and the radial and axial responses were satisfied by the $1^{st}$ and $2^{nd}$ planetary gears and the $3^{nd}$ helical gear transmission error(TE), respectively. However, the output shaft support bearing's outer race responses were not satisfied with the radial response by the $2^{nd}$ TE and axial response by the $3^{rd}$ TE. To reduce the vibration, tooth modification was needed. After profile tooth modification, at the outer race of the output shaft support bearing, the radial response was reduced by approximately $20{\mu}m$, and the axial response was reduced by approximately $6{\mu}m$.

• Food Science and Biotechnology
• /
• 제17권5호
• /
• pp.912-918
• /
• 2008

This study was conducted to identify the differences in proteomic characteristics of 'Agakong', recombinant inbred line, and its parental genotypes 'Eunhakong' (Glycine max) and 'KLG10084' (G. soja). The isoflavone content of 'Agakong' was 3 times higher than that of its parental lines. A combined high-throughput proteomic approach was employed to determine the expression profile and identity of proteins using 2-dimensional gel electrophoresis and matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry. The overall distribution patterns of proteins are quite similar, but lots of protein spot intensities varied among the genotypes. A total of 41 proteins, representing significant difference in the quantities of protein among the lines, were successfully identified. Among them, more than 50% of the proteins identified were subunits of glycinin and $\beta$-conglycinin, 2 major storage proteins. This study showed that the proteomic analysis could help to define specific changes in protein level and composition, which can occur in the generation of new soybean varieties.

• 한국식품과학회지
• /
• 제26권1호
• /
• pp.68-73
• /
• 1994

야생식용식물인 참마뿌리의 성숙도에 따른 휘발성 풍미성분을 분석하기 위해 SDE 방법으로 정유성분을 분리한 다음 GC 및 GC-MS를 이용하여 성분을 확인하였다. 어린 참마뿌리에서는 탄화수소류 35종, 알데히드류 5종, 케톤류 1종, 알콜류 9종, 에스테르류 2종, 유기산류 3종 및 기타 4종이 확인되었고, 성숙한 참마뿌리에서는 탄화수소류 23종, 알데히드류 2종, 알콜류 7종, 에스테르류 1종, 유기산류 8종 및 기타 1종이 확인되었다. 어린 참마에서 탄화수소류, 알데히드류, 알콜류 및 에스테르류의 함량이 더 많았고 풋풋한 내음이 더 강한 것으로 나타났으며 성숙한 참마에서는 고급 지방산의 함량이 상당히 많은 것으로 나타났다.