• Journal of Energy Engineering
• /
• v.11 no.3
• /
• pp.187-193
• /
• 2002

IGCC (Integrated Gasification Combined Cycle) power plant is becoming more attractive because it allows that various fuels like coal, heavy oil md even residue oil and wood are used in a gas turbine. This paper presents a prediction of performances of gas turbine when low caloric value syngas fuels produced from the IGCC is used in it originally designed with natural gas fuel. Using a systemic method which predicts a gas turbine behavior with limited design data, when natural gas, design fuel and four other types of syngas are used in GE 7FA gas turbine, its performances are predicted on design and off-design conditions.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.3
• /
• pp.264-273
• /
• 2012

In this paper, two types of integrated gasification combined cycle (IGCC) plants using either an air separation unit (ASU) or an ion transport membrane (ITM), which provide the oxygen required in the gasification process, were simulated and their thermodynamic performance was compared. Also, the influence of adopting a pre-combustion $CO_2$ capture in the downstream of the gasification process on the performance of the two systems was examined. The system using the ITM exhibits greater net power output than the system using the ASU. However, its net plant efficiency is slightly lower because of the additional fuel consumption required to operate the ITM at an appropriate operating temperature. This efficiency comparison is based on the assumption of a moderately high purity (95%) of the oxygen generated from the ASU. However, if the oxygen purity of the ASU is to be comparable to that of the ITM, which is over 99%, the ASU based IGCC system would exhibit a lower net efficiency than the ITM based system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.6
• /
• pp.91-102
• /
• 2017

The early basic studies on RDE has been surveyed in the previous paper. Recently active researches are carrying on for the application to the power plant and aerospace propulsion systems. Collaboration researches are going on for the application of RDE for the gas turbine, liquid rocket and combined cycle engines in many countries. Following the previous Part 1 paper, present paper is intended to provide the comprehensive survey of recent worldwide efforts on the realistic application of RDE.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.592-602
• /
• 2014

In the Integrated Gasification Combined Cycle (IGCC), the stability of the gasifier has strong influences on the rest of the plant as it supplies the feed to the rest of the power generation system. In order to ensure a safe and stable operation of the entrained-flow gasifier and for protection of the gasifier wall from the high internal temperature, the solid slag layer thickness should be regulated tightly but its control is hampered by the lack of on-line measurement for it. In this study, a previously published dynamic simulation model of a Shell-type gasifier is reproduced and two different linear model predictive control strategies are simulated and compared for multivariable control of the entrained-flow gasifier. The first approach is to control a measured secondary variable as a surrogate to the unmeasured slag thickness. The control results of this approach depended strongly on the unmeasured disturbance type. In other words, the slag thickness could not be controlled tightly for a certain type of unmeasured disturbance. The second approach is to estimate the unmeasured slag thickness through the Kalman filter and to use the estimate to predict and control the slag thickness directly. Using the second approach, the slag thickness could be controlled well regardless of the type of unmeasured disturbances.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.368-377
• /
• 2023

Natural Gas Combined Cycle(NGCC) recently receives lots of attention as an attractive form of power plants by virtue of its low carbon emission compared with coal-fired power plant. Nevertheless, it also needs carbon capture process since it is difficult to completely suppress carbon emission even for the NGCC. A simulation study has been performed to optimize operating condition of a carbon capture process using MEA considering low partial pressure of carbon dioxide in NGCC emission gas. For accurate optimization, overall process model including both NGCC and the carbon capture process has been built with a simulation software. Then, optimization in which various performance indices such as carbon dioxide absorption rate, solvent regeneration rate and power loss in the NGCC are simultaneously reflected has been done. Especially, it is noticeable that this study focuses on not only the amount of energy consumption but also the absorption and regeneration performance of carbon capture process. The best result considering all the performance indices has been achieved when the reboiler temperature is 120 ℃ and the reason has been analyzed.

• Plant Journal
• /
• v.11 no.2
• /
• pp.32-38
• /
• 2015

This study was conducted on combined cycle power plant consisting of HRSG with integral deaerator type to avoid tube failures of low pressure evaporator tubes. Based on the observation of pH variation at the discharge of boiler feed water pump by continuous pH measurement for a period of time, it was identified that pH of feed water is getting reduced as ammonia is distributed into vapor and liquid depending on the distribution ratio of ammonia in the LP drum after the deaerator. To solve this problem, the counterplan was prepared by reexamination of ammonia injection point and quantity. In conclusion, it was accomplished that 9.2~9.6 is the optimized pH range for boiler feed water by arranging additional piping for ammonia to inject directly to LP drum.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.7 s.124
• /
• pp.572-578
• /
• 2007

Two stroke low speed diesel engines are widely used for marine propulsion or as power plant prime mover. These engines have many merits which includes higher thermal efficiency, mobility and durability. Yet various annoying vibrations occur sometimes in ships or at the plant itself. Of these vibrations, torsional vibration is very important and dictates a careful investigation during the engme's initial design stage for safe operation. With the rule and limit on torsional vibration in place, shaft strength fatigue due to torsional vibration however demands further analysis which possibly can be incorporated in the classification societies' rule and limit. In addition, the shaft's torsional vibration stresses can be calculated equivalently from accumulated fatigue cycles number due to transient torsional vibration in time domain. In this paper, authors suggest a new estimation method combined with Palmgren-Miner equation. A 6S70MC-C ($25,320ps{\times}91rpm$) engine for ship propulsion was selected as a case study. Angular velocity was measured, instead of shaft's strain, for simplified measurement and it was converted to torsional vibration stress for accumulated fatigue cycle numbers in shafting life time. Likewise, the accumulated fatigue calculation was compared with shaft fatigue strength limit. This new method can be further realized and confirmed in ship with two stroke low speed diesel engine.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1535-1542
• /
• 2012

A Heat Recovery Steam Generator(HRSG) is the main component of a Combined Cycle Power Plant(CCPP). It is a very large structure that is made from relatively thin metal sheets. Therefore, the structural integrity of an HRSG is very important to ensure safe operation during plant lifetime. In particular, thermal deformation and thermal fatigue have been revealed as the main causes of the mechanical degradation of an HRSG. In order to prevent unexpected damage, safety evaluation based on a large-scale analysis is necessary. Therefore, this study aims to improve the safety of HRSG by using Finite Element Analysis(FEA) results derived from large-scale analysis. Furthermore, the modified design is verified by comparing it with the original one. This result will be used as basic data for improving the safety of a vertical-type HRSG.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.566-574
• /
• 2011

Coal gasifier is a key component for achieving high efficiency in integrated gasification combined cycle and indirect coal liquefaction. Although there have been several successful coal gasifiers that were commercially proven, many different design configurations are still possible for a simple and reliable gasifier operation. Four different gasifier design concepts of dry-feeding were compared in terms of residence time, exit syngas temperature and syngas composition. First, cold-flow simulation was applied to pre-select the configuration concepts, and the hot-flow simulation including chemical reactions was performed to compare the concepts at more actual gasifier operating conditions. There are many limitations in applying CFD method in gasifier design, particularly in estimating slag behavior and slag-tap design. However, the CFD analysis proved to be useful in comparing the widely different gasifier design concepts as a pre-selection tool.

• Journal of Korean Academy of Nursing
• /
• v.40 no.5
• /
• pp.736-746
• /
• 2010

Purpose: This study was done to identify the distribution and related factors for stage of change for wearing hearing protection devices (HPDs) by workers in environments with high noise. Predictors of Use of Hearing Protection Model and Trans-theoretical Model were tested. Methods: The participants were 755 workers from 20 noisy work places in Busan and Gyeongnam. Data were collected from January to April 2008 using self-administered questionnaires, and analyzed using multiple logistic regression. Results: There were significant differences in social mode (OR=1.35, 95% CI: 1.06-1.73) between precontemplation/contemplation and preparation stage, in males (OR=2.36, 95% CI: 1.24-4.51), workers with high school education or less (OR=1.39, 95% CI: 1.28-2.78), shift workers (OR=1.50, 95% CI: 1.02-2.21), workers who previously worked in noisy places (OR=1.39, 95% CI: 1.20-2.34), and workers who had previous hearing examinations (OR=1.89, 95% CI: 1.25-2.85), in the social model (OR=1.59, 95% CI: 1.42-1.78), and self-efficacy (OR=1.05, 95% CI: 1.02-1.08) between workers in preparation and action stages, in length of time working in noisy work places (OR=2.26, 95% CI: 1.17-4.39), social model (OR=1.66, 95% CI: 1.33-2.08), and perceived benefit (OR=0.95, 95% CI: 0.93-0.97) between action and maintenance stage. Conclusion: Social model was a common factor showing differences between two adjacent stages for wearing HPDs. The results provide data for developing programs to encourage workers to wear HPDs and application of these programs in work settings.