Study on Safety Design of Vertical-Type Heat Recovery Steam Generator Based on Large-Scale Analysis
![]() |
Ryu, Tae-Young
(School of Mechanical Engineering, Sungkyunkwan Univ.)
Yang, Sang-Mo (School of Mechanical Engineering, Sungkyunkwan Univ.) Jang, Hyun-Min (School of Mechanical Engineering, Sungkyunkwan Univ.) Choi, Jae-Boong (School of Mechanical Engineering, Sungkyunkwan Univ.) Myung, Ki-Chul (SeenTec Co.) Lee, Dong-Yun (SeenTec Co.) Choi, Shin-Beom (Korea Atomic Energy Research Institute) |
1 | Ludema., K. C., 1996, "Friction, Wear, Lubrication," CRC Press, New York, pp. 96-98. |
2 | America Society of Mechanical Engineers, 2007, "ASME Code Sec.II - Materials," ASME Boiler and Pressure Vessel Code, New York. |
3 | ANSYS, 2008, "Introduction of ANSYS ver. 12," ANSYS Inc. |
4 | Lee, C. S., Chung, S. W., Shin, H. and Kim, S. J., 2005, "Virtual Material Characterization of 3D Orthogonal Woven Composite Materials by Large-Scale Computing," Journal of Composite Materials, Vol. 39, No. 10, pp. 851-863. DOI |
5 | Liu, Y., 2006, "A New Fast Multipole Boundary Element Method for Solving Large-Scale Two- Dimensional Elastostatic Problems," Internatonal Journal for Numerical Methods in Engineering, Vol. 65, pp. 863-881. DOI ScienceOn |
6 | Kim, J. S., Lee, S. M., Lee, J. Y., Jeong, H. S. and Lee, S. M., 2012, "Development of Pre- and Post-Processing System for Supercomputing Based Large-Scale Structural Analysis," Society of CAD /CAM Engineers, Vol. 17, No. 2, pp. 123-131. DOI ScienceOn |
7 | Incropera, F. P. and Dewitt, D. P., 2002, "Fundamentals of Heat and Mass Transfer," 5th edition, Jhon Wiley & Sons, New York, pp. 491-495. |
8 | Altair Engineering, 2008, "Hypermesh and Batchmesher," Altair Engineering. |
9 | Lee, C. H., Kim, S. H. and Kim, J. H., 2000, "The Analysis of Dynamic Behavior for Horizontal Drum Type HRSG," KSME Fall Conference, pp. 645-650. |
10 | Chong, C. H. and Song, J. I., 2008, "Effect on Thermal Performance of Superheater Module under Part Load Operation in HRSG," Journal of Energy Engineering, Vol. 17, No. 3, pp. 161-166. |
11 | Kim, T. S., Lee, D. K., and Ro, S. T., 2000, "Analysis of Thermal Stress Evolution in the Steam Drum During Start-up of a Heat Recovery Steam Generator," Applied Thermal Engineering, Vol. 20, pp. 977-992. DOI ScienceOn |
12 | Autodesk, 2009, "Autodesk Inventor User Manual," Autodesk Inc. |
13 | Cha, H., Kim, K. J., Song, Y. S. and Kim, J. R., 2010, "Dynamic Simulation of HRSG System According to Start-up/Shutdown Curve," KSME Fall Conference, pp. 3744-3748. |
![]() |