• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1523-1535
• /
• 2018

High-performance Phase-Locked Loops (PLLs) are critical for grid synchronization in grid-tied power electronic applications. In this paper, a new single-phase All Digital Phase-Locked Loop (ADPLL) is proposed. It features fast transient response and good robustness under distorted grid conditions. It is designed for Field Programmable Gate Array (FPGA) implementation. As a result, a high sampling frequency of 1MHz can be obtained. In addition, a new OSG is adopted to track the power frequency, improve the harmonic rejection and remove the dc offset. Unlike previous methods, it avoids extra feedback loop, which results in an enlarged system bandwidth, enhanced stability and improved dynamic performance. In this case, a new parameter optimization method with consideration of loop delay is employed to achieve a fast dynamic response and guarantee accuracy. The Phase Detector (PD) and Voltage Controlled Oscillator (VCO) are realized by a Coordinate Rotation Digital Computer (CORDIC) algorithm and a Direct Digital Synthesis (DDS) block, respectively. The whole PLL system is finally produced on a FPGA. A theoretical analysis and experiments under various distorted grid conditions, including voltage sag, phase jump, frequency step, harmonics distortion, dc offset and combined disturbances, are also presented to verify the fast dynamic response and good robustness of the ADPLL.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.567-567
• /
• 2013

Surface plasmon resonance is the enhancement of electromagnetic wave caused by oscillation on the metal and dielectric interfaces. Surface plasmons with nanohole arrays provides an enhancedresonance for the specific wavelengths of interests. Asymmetric array of nanoscale structures can enable orientation dependent shift of resonance wavelengths when combined with the control of polarization for incident visible light, thus providing color tunability. Appropriate lattice constants along the direction of polarization in rectangular nanohole arrays can determine the resonance condition generating red (R), green (G), and blue (B) colors and potentially be applied to display applications. In ourprevious report, we have optimized the ion beam nanomachining conditions to fabricate the nanostructures on the metal film. We apply the fabrication conditions to make nanoscale hole arrays using 100 nm thick gold layer on the glass substrate with the optimal design of periodicities along x, y, and diagonal directions of a=440 nm, b=520 nm, c=682 nm, and the hole diameter of d=200 nm. Using the reflective light in dark field mode of optical microscope, we can observe different colors. When the polarizer is paralleled along a, b, or c direction, the represented color is changed to R, G, and B, respectively. We further map the color using i1 to correlate the conditions of the nanohole arrays with their characteristic color.

• 로봇학회논문지
• /
• 제4권1호
• /
• pp.1-9
• /
• 2009

Radio Frequency Identification (RFID) is an automatic identification method. Information such as identification, logistics history, and specification of products are written and stored into the memory of RFID tags (that is, transponders), and retrieved through RF communication between RFID reader device and RFID tags. RFID systems have been applied to many fields of transportation, industry, logistics, environment, etc in order to improve business efficiency and reduce maintenance cost as well. Recently, some research results are announced in which RFID devices are combined with other sensors for mobile robot localization. In this paper, design of multi-protocol baseband for RFID reader device is proposed, and the baseband modem is implemented into SoC (System On a Chip). The baseband modem SoC for multi-protocol RFID reader is composed of several IP (Intellectual Property) blocks such as multi-protocol blocks, CPU, UART(Universal Asynchronous Receiver and Transmitter), memory, etc. As a result, the SoC implemented with FPGA(Field Programmable Gate Array) is applied to real product. It is shown that the size of RFID Reader module designed with the FPGA becomes smaller, and the SoC chip price for the same function becomes cheap. In addition, operation performance could be the same or better than that of the product with no SoC applied.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.200-211
• /
• 2017

Conventional boost-full-bridge and boost-hybrid-bridge two-stage inverters are widely applied in order to adapt to the wide dc input voltage range of photovoltaic arrays. However, the efficiency of the conventional topology is not fully optimized because additional switching losses are generated in the voltage conversion so that the input voltage rises and then falls. Moreover, the electrolytic capacitors in a dc-link lead to a larger volume combined with increases in both weight and cost. This paper proposes a higher efficiency inverter with time-sharing synchronous modulation. The energy transmission paths, wheeling branches and switching losses for the high-frequency switches are optimized so that the overall efficiency is greatly improved. In this paper, a contrastive analysis of the component losses for the conventional and proposed inverter topologies is carried out in MATLAB. Finally, the high-efficiency under different switching frequencies and different input voltages is verified by a 3 kW prototype.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1987년도 춘계학술대회논문집
• /
• pp.143-148
• /
• 1987

The Design of automotive IP must be designed for improving safety, and for satisfying the consumer's preference and for enlarging the usability of various gauges and information displaydevices. Also, these objects become more important by regarded and will be treated very sensitively for the next-generation vehicle concepts. Therefore, Automotive IP must be designed to adjust these trends, besides accord with car-inner lifestyle. One of these concept's designs is to apply Human Sensibility Ergonomics. This study suggestes the driver-centered design of the IP components that focused on the audio unit and HVAC(Heat and Ventilation Air Conditioner) through cognitive experiment. Primarily, analyzed components of IP in use, then, combined these components (especially, the number and arry of buttons, the position of LCD panel, etc.) nd designed some sample images(prototypes) the same as real size. After the subjects looked at the sam ples at the interval of 0.2/0.4/0.6 seconds, subjects should fill out the given forms from their memory. Then, the optimal prototype of IP was designed in respect to the correctness of cognition. The results will show the basic guideline of optimal design of IP that in the case of aaudio unit, the position of LCD, the array and the number of channel, in the case of HVAC, the position of LCD, TEMP button type and other button types.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.1034-1040
• /
• 2003

Tension mask is a part of CRT type devices, which is installed right behind glass-made front panel. Numerous slits on the thin metal sheet enable the electron beams emitted from posterior gun to be focused, resulting in enhanced definition. Flattened and enlarged displays necessitate the imposition of pretension on the masks, in order to improve the robustness of display quality against vibration or impact. High temperature assembly process subsequent to pretensioning, however, degenerates creep resistance of mask material, and common mask may become susceptible to undesirable elongation due to creep. Once tensile stress becomes high enough to induce creep deformation, pretension is substantially loosened. In this study, tension mask assembly is modeled as a combined structure of beams and wire array, and a numerical simulation is attempted for pretensioning followed by high temperature process. Based on a model study, creep occurrence is found to be probable and its adverse influence is quantified. As fur maintaining high tensile force, simply increasing pretension does not seem to be helpful. Instead, the structure of frame needs to be modified somehow, or material for mask needs to be selected properly.

• 한국음향학회지
• /
• 제20권5호
• /
• pp.61-68
• /
• 2001

본 논문에서는 목적함수에 대한 구배계산을 위한 해석적인 방법과 차분근사법을 점배열음원과 최적화 알고리즘(DFP법: davidon-fletcher-powell)을 조합한 적응형 초음파 트랜스듀서의 지향성 최적화에 적용하였다. 위의 두 방법에 대한성능을 비교하기 위하여 준이상 빔 (quasi-ideal beam)과 회전 빔을 목적지향성으로 설정하였다. 수치적인 실험 결과, 차분근사법은 부엽 (side lobe) 레벨의 억압능력은 물론 수렴과정에서의 안정성, 수렴속도, 적응성 면에서 해석적인 계산법에 비해 탁월함을 나타내었다.

• 융합신호처리학회논문지
• /
• 제11권1호
• /
• pp.41-46
• /
• 2010

본 논문은 도래방향 추정법의 하나인 유니터리 MUSIC(MUltiple SIgnal Classification) 알고리즘의 하드웨어 구현에 대한 것이다. 이 알고리즘은 복소 상관행렬을 유니터리 변환(Unitary transform)을 통해 실수 상관행렬로 변환하여 하드웨어 구현을 쉽게 할 수 있다. 실수 상관행렬의 고유치와 고유벡터는 Jacobi법에 ADD와 SHIFT만으로 구현이 가능한 CORDIC(COordinate Rotation DIgital Computer) 알고리즘을 접목한 Jacobi-CORDIC 알고리즘으로 구하였다. 또한 256점 DFT(Discrete Fourier Transform)를 적용하여 각도 스펙트럼을 구하고, 스펙트럼의 검색으로 도래각을 추정하였다. 본 논문에서는 알고리즘의 하드웨어 구현을 위해 System Generator를 이용하여 설계하였다. 최종 설계된 DoA 추정 시스템은 Matlab 시뮬레이션 결과와 비교하여 일치된 결과를 얻었고, Hardware Co-Sim을 통해 System Generator 설계 결과를 검증하였다.

• 천문학회지
• /
• 제37권4호
• /
• pp.211-216
• /
• 2004

We present the results of an H I aperture synthesis mosaic of the Large Magellanic Cloud (LMC), made by combining data from 1344 separate pointing centers using the Australia Telescope Compact' Array (ATCA) and the Parkes multibeam receiver. The resolution of the mosaiced images is 50" (<15 pc, using a distance to the LMC of 55kpc). This mosaic, with a spatial resolution .15 times higher than that which had been previously obtained, emphasises the turbulent and fractal structure of the ISM on the small scale, resulting from the dynamical feedback of the star formation processes with the ISM. We also have done a widefield panoramic survey of H$\alpha$ emission from the Magellanic Clouds with an imager mounted on the 16-inch telescope at Siding Spring Observatory. This survey produced H$\alpha$ images which are equal to the ATCA survey in area coverage and resolution. This survey allows us to produce a continuum-subtracted image of the entire LMC. In contrast with its appearance in the H$\alpha$ image, the LMC is remarkably symmetric in H I on the largest scales, with the bulk of the H I residing in a disk of diameter 8. $^{\circ}4$ (7.3 kpc) and a spiral structure is clearly seen. The structure of the neutral atomic ISM in the LMC is dominated by H I filaments combined with numerous shells and holes.

• 한국전자파학회논문지
• /
• 제10권6호
• /
• pp.959-967
• /
• 1999

본 논문에서는 등간격 선형어레이로 입사하는 다중 인코히어런트 평면파의 도래각을 추정하기 위하여 신 호부각법과 결합된 선형예측방법을 제안한다. 선호부각법의 기본 개념은 Frobenius norm변에서 주어진 추정 행렬에 가장 가까이에 있는 주어진 rank의 공분산 행렬을 찾는 것이다. 선형예측방법은 높은 분해능을 보이나 낮은 신호대 잡음비 환정에서 낮은 통계적 성능을 보이는 것으로 알려져 있다. 이 문제를 해결하기 위하여 선형예측방볍에 신호부각법을 적용하였다. 낮은 신호대 잡음비 환경에서도 제안된 선호부각 선형예측 방법의 성능이 기존의 선형예측방법보다 우수한 통계적 성능을 제공함을 컴퓨터 시율레이션을 통하여 알 수 있었다.