• Laser Solutions
• /
• v.11 no.2
• /
• pp.15-19
• /
• 2008

Electron beam (EB) weldability of pure grade Nb sheet was studied. One of Nb sheets was as-annealed and the other was cold rolled. Microstructures, Vickers hardness, and transverse weld tensile test were carried out for the base metal, the heat affected zone (HAZ) and weld metal. In the case of the EB welds made using the annealed Nb sheeet, fine equiaxed grains and coarse grains were dominant at the base metal and the HAZ, respectively, and columnar grains were observed at the weld metal. For the EB welds made using the cold rolled Nb sheet, elongated grains in the rolling direction at the base metal, and the microstructures of the weld metal and the HAZ are similar to those of the EB welds made using the annealed Nb sheet, respectively. For both annealed and cold rolled Nb sheet, the width of the HAZs are unusually wide in spite of using high density heat source, i.e. electron beam, and the grain sizes of both HAZs are similar. When tensile test was carried out using the transverse weld specimens, the failure occurred at the HAZ for both EB welds made using Nb sheets annealed and cold rolled, respectively and the tensile strengths of both specimens were 161MPa. Vickers hardness of EB welds made using annealed Nb was 56-57 Hv at both base metal and weld metal, 52-53 Hv at the HAZ. On the other hand, Vickers hardness of EB welds made using cold rolled Nb was 97-99 Hv at the base metal, but the hardness values of weld metal were similar to those obtained at the weld metal of annealed Nb.

• Restorative Dentistry and Endodontics
• /
• v.25 no.2
• /
• pp.289-298
• /
• 2000

Carbamide peroxide is usually used for vital teeth bleaching at home. Complications such as tooth hypersensitivity and/or gingival irritation are frequently reported. Therefore, this study was performed to evaluate any possible histological changes in pulp and periodontal tissue by carbamide peroxide bleaching gel in rats. 10% and 15% carbamide peroxide containing nightguard for upper molar were worn for 4 hours a day. The rats were sacrificed after 1 day, 2 days, 3 days, 4 days and 6 days application of carbamide peroxide respectively. The results were as follows : Mild infiltration of inflammatory changes below the junctional epithelium and hyperplasia of epithelium were observed in both 10% and 15% carbamide peroxide treated groups. In all experimental groups, odontoblasts were changed from columnar to cuboidal shape and/or obliterated and the focal loss of predentin was observed in pulp horn. With increasing time of application, these changes were more remarkable, but limited in pulp horn. Inflammatory reactions, vacuolar changes and hyaline degenerations of the pup tissue were also observed in some cases. These results suggested that carbamide peroxide gel used in home bleaching could cause reversible pulpal irritation.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.5
• /
• pp.249-252
• /
• 2004

Effects of HA and TiN coating on the electrochemical characteristics of Ti-6AI-4V alloys for bone plates were investigated using various test methods. Ti-6AI-4V alloys were fabricated by using a vacuum induction furnace and bone plates were made by laser cutting and polishing. HA was made of extracted tooth sintered and then tooth ash was used as HA coating target. The TiN and HA film coating on the surface were carried on using electron-beam physical vapor deposition (EB-PVD) method. The corrosion behaviors of the samples were examined through potentiodynamic method in 0.9% NaCI solutions at $36.5\pm$$1^{\circ}C$ and corrosion surface was observed using SEM and XPS. The surface roughness of TiN coated bone plates was lower than that of tooth ash coated plates. The structure of TiN coated layer showed the columnar structure and tooth ash coated layer showed equiaxed and anisotrophic structure. The corrosion potential of the TiN coated specimen is comparatively high. The active current density of TiN and tooth ash coated alloy showed the range of about $1.0xl0^{-5}$ $A\textrm{cm}^2$, whereas that of the non-coated alloy was$ 1.0xl0^{-4}$ $A\textrm{cm}^2$. The active current densities of HA and TiN coated bone plates were smaller than that of non-coated bone plates in 0.9% NaCl solution. The pitting potential of TiN and HA coated alloy is more drastically increased than that of the non-coated alloy. The pit number and pit size of TiN and HA coated alloy decreased in compared with those of non-coated alloy. For the coated samples, corrosion resistance increased in the order of TiN coated, tooth ash coated, and non-coated alloy.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.167-168
• /
• 2012

Films of CrN, $Cr_{40}Zr_9N$, and $Cr_{31}Zr_{16}N$ were deposited on a steel substrate by closed field unbalanced magnetron sputtering, and their oxidation behaviors at $700^{\circ}C$ and $800^{\circ}C$ for up to 60h in air were investigated. All the deposited films were composed of the CrN phase. Zirconium atoms in $Cr_{40}Zr_9N$ and $Cr_{31}Zr_{16}N$ films partially dissolved in the CrN phase. They advantageously refined the columnar structure, reduced the surface roughness, and increased the microhardness. The CrN film displayed relatively good oxidation resistance, owing to the formation of the highly protective $Cr_2O_3$ on its surface. The $Cr_{40}Zr_9N$ and $Cr_{31}Zr_{16}N$ films oxidized to $Cr_2O_3$ as the major phase and ${\alpha}-ZrO_2$ as the minor one. They oxidized primarily by the inward transport of oxygen. The addition of Zr could not increase the oxidation resistance of the CrN film, because the formed $ZrO_2$ that was intermixed in the $Cr_2O_3$-rich oxide layer was oxygen permeable, and developed the compressive stress in the oxide scale owing to the volume expansion during its formation.

• Annals of dermatology
• /
• v.30 no.6
• /
• pp.694-700
• /
• 2018

Background: Kaempferol (3,4',5,7-tetrahydroxyflavone) is a flavonoid known to have a wide range of pharmacological activities. The 3-OH group in flavonoids has been reported to determine antioxidant activities. Objective: We tested whether kaempferol can affect the expression of integrins and the stem cell fate of interfollicular epidermal stem cells. Methods: Skin equivalent (SE) models were constructed, and the expression levels of stem cell markers and basement membrane-related antigens were tested. The immunohistochemical staining patterns of integrins, p63, and proliferating cell nuclear antigen (PCNA) were compared between kaempferol- and apigenin-treated SE models. Reverse transcription-polymerase chain reaction (RT-PCR) was used to evaluate the mRNA expression of integrins. Results: Kaempferol increased the thickness of the epidermis when added to prepare SEs. In addition, the basal cells of kaempferol-treated SEs appeared more columnar. In the immunohistological study, the expression of integrins ${\alpha}6$ and ${\beta}1$ and the numbers of p63- and PCNA-positive cells were markedly higher in the kaempferol-treated model. However, apigenin showed no effects on the formation of three-dimensional skin models. RT-PCR analysis also confirmed that kaempferol increased the expression of integrin ${\alpha}6$ and integrin ${\beta}1$. Conclusion: Our findings indicated that kaempferol can increase the proliferative potential of basal epidermal cells by modulating the basement membrane. In other words, kaempferol can affect the fate of interfollicular epidermal stem cells by increasing the expression of both integrins ${\alpha}6$ and ${\beta}1$. These effects, in particular, might be ascribed to the 3-OH group of kaempferol.

• Korean Journal of Remote Sensing
• /
• v.14 no.1
• /
• pp.1-16
• /
• 1998

Microwave brightness temperature data measured from the Special Sensor Microwave/Imager (SSM/I) aboard Defense Meteorological Satellite Program (DMSP) satellite are used to investigate the characteristics of hydrological features of the East Asian summer monsoon during 1994 and 1995. The analyzed parameters include total columnar water vapor, cloud liquid water, and rain rate. These are estimated from SSM/I brightness temperature data for the two summer seasons (June, July, August) of 1994 and 1995 over the Asian monsoon region (0$^{\circ}$-60$^{\circ}$N, 45$^{\circ}$-180$^{\circ}$E). Results indicate that there are periodic westward movement of dry air over the 20$^{\circ}$-30$^{\circ}$N latitudinal belt with about 20-30 day period. Considering that the location of the North Pacific high is closely linked to the evolution of the monsoon activities over East Asia, the westward expansion of the North Pacific high may be the one important element modulating the monsoon intensity.

• Journal of The Geomorphological Association of Korea
• /
• v.15 no.2
• /
• pp.1-9
• /
• 2008

This studied area is divided into the mountains and the valleys. The former is nearly consisted of the badland, the latter is consisted of alluvial plains in the valley, fluvial terrace at the side of the river, alluvial fans between mountains and river terrace. There are many tors, mushroom rocks, sugarloaves, weathering pits, castle coppies, columnar rocks, pinnacles, balanced rocks carved on tuff by means of erosion in the Chiricahua Nat'l Monument. Willcox Playa is alkalic crust where was lake in pleistocene epoch at the time wetter than present. Alkalic crust was made of Ca, Na, K etc. There are sand dunes around here where was lake side in the past. We found many kinds of fossils at the 2,000ft thick horizons of valley alluvium. Pediment and alluvium bordered at the base of Mt. Dragoon wavily. Exfoliation and spalling and sheeting resulted in boulders around here. Tucson is alluvial plain filled in thick 7,0000ft valley. Volcano, fault, erosion, alluvium were and are processing in this area.

• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.256-260
• /
• 2014

Columnar-structured cesium iodide (CsI) scintillators doped with thallium (Tl) are frequently used as x-ray converters in medical and industrial imaging. In this study we investigated the imaging characteristics of CsI:Tl films with various reflective layers-aluminum (Al), chromium (Cr), and titanium dioxide ($TiO_2$) powder-coated on glass substrates. We used two effusion-cell sources in a thermal evaporator system to fabricate CsI:Tl films on substrates. The scintillators were observed via scanning electron microscopy (SEM), and scintillation characteristics were evaluated on the basis of the emission spectrum, light output, light response to x-ray dose, modulation transfer function (MTF), and x-ray images. Compared to control films without a reflective layer, CsI:Tl films with reflective layers showed better sensitivity and light collection efficiency, and the film with a $TiO_2$ reflective layer showed the best properties.

• Journal of Sericultural and Entomological Science
• /
• v.32 no.1
• /
• pp.49-57
• /
• 1990

To investigate the pathway of Nuclear Polyhedrosis Virus(NPV) of Bombyx mori in early stage infection of 2nd instar larva, the larval tissues were observed under electron microscope at interval of 6, 12, 24, and 48 hours after virus inoculation. The results are as follows. 1. The intact and enveloped nucleocapsids released from the polyhedra protein in the gut lumen apparently entered with the microvilli. 2. Virus progenies were observed in columnar cell nuclei 24 hours after inoculation, but polyhedra was not seen. The enveloped virus was observed in some of the intercellular spaces between mid-gut cells. 3. Many enveloped virus particles appeared in the basement membrane. These enveloped virus particles passed the basement membrane and gathered at blood cells in heomocoeal. 4. The NPV muliplicates in nuclei of the blood cells and the tracheal cells normally.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2629-2639
• /
• 2021

Within the frame of the EMPIrE test, four monolithic mini-plates were irradiated in the ATR reactor. In two of them, the monolithic U(Mo) foil had been PVD-coated with Zr before the plate manufacturing. Extensive microstructural characterizations were performed on a fresh archive mini-plate, using Optical Microscopy (OM), Scanning Electron Microscopy (SEM) combined with Energy Dispersive Spectroscopy (EDS), Electron Backscattered Diffraction (EBSD) and Focused Ion Beam (FIB)/Transmission Electron Microscopy (TEM) with nano EDS. A particular attention was paid to the examination of the U(Mo) foil, the PVD coating, the cladding/Zr and Zr/U(Mo) interfaces. The Zr coating has a thickness around 15 ㎛. It has a columnar microstructure and appears dense. The cohesion of the cladding/Zr and Zr/U(Mo) interfaces seems to be satisfactory. An almost continuous layer with a thickness of the order of 100-300 nm is present at the cladding/Zr interface and corresponds to an oxidized part of the Zr coating. At the Zr/U(Mo) interface, a thin discontinuous layer is observed. It could correspond to locally oxidized U(Mo). This work provides a basis for interpreting the results of characterizations on EMPIrE irradiated plates.