• Journal of Biomedical Engineering Research
• /
• v.15 no.2
• /
• pp.129-134
• /
• 1994

In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Transformation from temporal summation to two-dimensional mappings is formed by 4 nearest point interpolaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality.

• 보존과학연구
• /
• s.32
• /
• pp.37-52
• /
• 2011

This study investigates the hardening characteristics of the mixture lacquer and glue at room temperature. Diverse samples were made from manufacturing of glue to the adding ratio in sap of the lacquer tree. After the examination of moisture content of samples, it has been seen that there is no relation with glue's kinds or adding ratio, but only with contain level of moisture. The samples made with film shape in order to examine the drying time. Samples with isinglass needed for over three days and had smooth surface. However, samples mixed with animal glue dried within a day and had ripples on the surface because of fast drying rate. In addition, the samples with isinglass had slow change of colour in early step of drying and no colour difference after completely drying although it had significant changes to black oxide as soon as contact with air. In structural analysis with FT-IR showed that the carbonyl bond increased in the samples of mixed with glue, compared to raw lacquer and treated lacquer.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.818-826
• /
• 2009

Dyeability of microbial violacein produced from Chromobacterum violaceum CV107 on to multifiber fabrics has been studied. The bluish-purple colourants were produced by cultivation of Chromobacterum violaceum using LB liquid medium for 2 days. The colourant was extracted with 80% acetone and identified as violacein by LC/MS analysis. The violacein could be dyed on not only natural fibers such as Cotton, Silk and Wool but also synthetic fibers such as Diacetate, Triacetate, Creslan 61 and Nylon 66. Maximum K/S values were shown at 540-580 nm according to different fiber with color appearance of purple or blue. An optimum pH and temperature under dyeing condition were 10 and $70^{\circ}C$, respectively. Any mordants were not improved colour density and quality on various fabrics. From this studies, pigments produced microbe have a high potentials for natural dyeing on fabrics. Finally, development of new colourants from microbe has made a possible change for new dyeing field in respects of eco-friend and repeatability of natural dyeing for apparels.

• Advances in concrete construction
• /
• v.7 no.4
• /
• pp.263-275
• /
• 2019

In the present work, Granulated Blast Furnace Slag (GBFS) and Fly ash (FA) were used as partial replacement of Natural Sand (NS) and Ordinary Portland Cement (OPC) by weight. One control mix, one with GBFS, three with FA and three with GBFS-FA combined mixes were prepared. Replacements were 50% GBFS with NS and 20%, 30% and 40% FA with OPC. Preliminary investigation on development of compressive strength was carried out at 7, 28 and 90 days to ensure sustainability of waste materials in concrete matrix at room temperature. After 90days, thermo-mechanical study was performed on the specimen for a temperature regime of $200^{\circ}-1000^{\circ}C$ followed by furnace cooling. Weight loss, visual inspection along with colour change, residual compressive strength and microstructure analysis were performed to investigate the effect of replacement of GBFS and FA. Although adding waste mineral by-products enhanced the weight loss, their pozzolanicity and formation history at high temperature played a significant role in retaining higher residual compressive strength even up to $800^{\circ}C$. On detail microstructural study, it has been found that addition of FA and GBFS in concrete mix improved the density of concrete by development of extra calcium silicate gel before fire and restricts the development of micro-cracks at high temperature as well. In general, the authors are in favour of combined replacement mix in view of high volume mineral by-products utilization as fire protection.

• Journal of Animal Science and Technology
• /
• v.60 no.5
• /
• pp.8.1-8.9
• /
• 2018

Background: Indiscriminate use of antibiotics in livestock and poultry farming has caused emergence of new pathogenic strains. The situation has warrented the development of safe and alternative growth promoters and immunity enhancers in livestock. Herbal additives in animal and bird feed is a centuries-old practice. Thus, the present study investigated the efficacy of a standardized formulation of lipophilic turmeric extract containing curcumin and turmerones, (TF-36), as a natural growth promoter poultry feed additive. Methods: The study was designed on 180 one-day old chicks, assigned into three groups. Control group ($T_0$) kept on basal diet and supplemented groups $T_{0.5}$ and $T_1$ fed with 0.5% and 1% TF-36 fortified basal diet for 42 days. Each dietary group consisted of six replicates of ten birds. Body weight, food intake, food conversion ratio, skin colour, blood biochemical analysis and antioxidant status of serum were investigated. Results: Body weight improved significantly in $T_1$ with a 10% decrease in FCR as compared to the control. TF-36 supplementation in $T_1$ enhanced the antioxidant enzyme activity significantly (p < 0.05) with a decrease (p < 0.05) in lipid peroxidation. It also caused a slight yellow skin pigmentation without any change in meat color, indicating the bioavailability of curcumin from TF-36. However, no significant change in the concentration of serum creatinine, total protein and liver enzyme activities were observed, indicating the safety. Conclusion: In summary, we concluded that TF-36 can be a natural feed additive to improve growth performance in poultry, probably due to the better antioxidant activity and antimicrobial effects contributed by the better bioavailability of curcuminoids and turmerones. Besides, curcuminoids and turmerones were also known to be gastroprotective and anti-inflammatory agents.

• Journal of the Korean housing association
• /
• v.24 no.3
• /
• pp.121-133
• /
• 2013

The purpose of this study is to analyze the design characteristics of external appearances of Hundertwasser's housing projects through both literature review and field study, and to understand how Hundertwasser's architecture philosophy was embodied in the design of external appearances so such projects. The subjects of the analysis are: Hundertwasser House; In the Meadow Bad Soden; The Forest Spiral Darmstadt; and The Green Citadel Magdeburg. The conclusion of the study is as follows. The fundamental architecture philosophy of Hunderwasser is the close linkage between mankind and nature. He has proven, through his four housing projects mentioned above, that it is possible to build houses without destroying and in harmony with nature. Hundertwasser had identified vitality, irregularity and diversity as being the source of beauty of nature. Using the human creativity, he had embodied such elements into his housing projects, thus suggesting an ideal housing environment whereby humanity is respected. Hundertwasser made use of organic curved line and spiral shapes that exist in nature when designing his housing projects. His creativity was articulated through vitality, diversity, and irregularity in colour schemes and a wide range of form. Indeed, he was an architect pursuing the underlying nature of both human and nature. The current living environment in Korea can be characterized as being standardized and desolate, which is a result of housing projects being focused too much on functionalism. Through its analysis of Hundertwasser's housing projects, one of the objectives of this study is to contribute to a new design paradigm being called for today, including for housing projects to be more ecological and environmental-friendly. By motivating architects and appealing to their clients, this study hopes to motivate those involved in various housing projects to think progressively. Such an attitude change could assist in transforming and thus enhancing the overall living environment in Korea.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.377-385
• /
• 2015

This study was conducted to increase the shelf life of peeled-garlic by edible coating material such as carboxymethyl cellulose(CMC) with sodium benzoate, citric acid and lecithin. Peeled-garlic were stored in a storage chamber at $25^{\circ}C$ and were taken at regular intervals for analysis. The changes in weight loss, colour change, browning, decaying loss and texture of the coated samples with storage time were investigated in comparison with the uncoated samples to determine the delay in the deterioration time of the samples. The coatings contributed to a lower reduction in weight loss. The coatings decreased the browning and decaying loss loses in comparison to the uncoated peeled-garlic. It was possible to extend the storage period with lower weight loss until 32 days by coating peeled-garlic surfaces with emulsions containing CMC. It was found that the emulsion prepared using the mixture of lecithin, CMC, citric acid, sodium benzoate and water was suitable for the coating of peeled-garlic.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.6
• /
• pp.794-800
• /
• 2004

The purpose of this study is to propose a method of controlling freshwater algae which grows abundantly and forms water bloom in the eutrophic water body with $H_2O_2$. Both laboratory and field methodologies were used. For the laboratory test $H_2O_2$ was injected into the different growth phases of incubated Microcystis aeruginosa and the resulting algae growth control rate was examined. For the field test, $H_2O_2$ was dispersed into a lake. Lake water quality was evaluated using a pre-test and post-test analysis of chlorophyll-a, luminance, transmittance, etc., which allowed a comparative evaluation of water quality change. From the experimental results, the growth of algae can be controlled with the small amount of 1mg/L of $H_2O_2$ at the lag phase of growth. The field test results show that the green colour of lake water was removed completely by the reduction of chlorophyll-a and improved transmittance, luminance, TKN, TP, TOC and SS. These indicators of water quality were improved significantly after $H_2O_2$ injection. Toxicity test results using the lake fish show no evidence of detrimental effect of $H_2O_2$ up to 15mg/L. The results of $EC_{50}$ with P. phosphoreum show that the toxicity of $H_2O_2$ was negligible compared to copper which was commonly used for algae control.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.325-332
• /
• 2020

In the safety diagnosis of fire-damaged concrete structures, it is difficult to evaluate the strength and changes in materials due to high temperatures with the existing durability analysis method. In particular, the compressive strength of specimen with different damage levels by thickness is used as a representative value for reducing the compressive strength of the structural member. In this study, a heating experiment was performed with only top face heating and fully heating conditions at 400℃ to 800℃. After heating, splitting tensile test and color analysis were performed to sliced specimens with a thickness of 20mm accompanied by the compressive test of a fully heated specimen. As a result of the experiment, the compressive strength reduction rate calculated from the splitting tensile strength of every sliced specimen appeared to be within 10% of the fully heated specimen on aver age, and the hue value analysis showed consistent color values were observed by red at 400℃-600℃ and gray at 700℃ or above. It follows that the techniques proposed in this study are reasonably assessable to estimate heated temperature and residual compressive strength and damage depth of concrete.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.3
• /
• pp.160-171
• /
• 2021

Purpose. This in-vitro study evaluated and compared the color stability of 3D-printed and conventional heat-polymerized acrylic resins following aging, mechanical brushing, and immersion in staining medium. Materials and methods. Forty disc-shaped specimens (10 mm in diameter and 3 mm thick) were prepared from two 3D-printed [DentaBASE (DB) and Denture 3D+ (D3D)] and one conventional polymethylmethacrylate (PMMA) denture materials. The specimens were thermo-cycled, subjected to mechanical brushing, and were immersed in either coffee, lemon juice, coke, or artificial saliva (AS) to simulate one and two years of oral use. Color measurements of the specimens were recorded by a spectrophotometer at baseline (T0), and after one (T1) and two years (T2) of simulation. The color changes (ΔE) were determined and also quantified according to the National Bureau of Standards (NBS) units. Descriptive statistics, followed by factorial ANOVA and Bonferroni post-hoc test (α=.05), were applied for data analysis. Results. The independent factors, namely material, staining medium, and immersion time, and interaction among these factors significantly influenced ΔE (P<.009). Irrespective of the materials, treatments, and time, the highest and the lowest mean ΔEs were observed for PMMA in lemon juice (4.58 ± 1.30) and DB in AS (0.41 ± 0.18), respectively. Regarding the material type, PMMA demonstrated the highest mean ΔE (2.31 ± 1.37), followed by D3D (1.67 ± 0.66), and DB (0.85 ± 0.52), and the difference in ΔE between the materials were statistically significant (P<.001). All the specimens demonstrated a decreased color changes at T2 compared to T1, and this difference in mean ΔE was statistically significant (P<.001). Conclusion. The color changes of 3D-printed denture resins were low compared to conventional heat polymerized PMMA. All the tested materials, irrespective of the staining medium used, demonstrated a significant decrease in ΔE values over time.