• 보존과학회지
• /
• 제31권2호
• /
• pp.105-114
• /
• 2015

본 연구에서는 유물의 보존 처리 과정에서 결손 부위의 복원을 위해 적용 가능한 다목적용 복원재료로써 Epoxy Putty를 개발하고자 하였다. 기존에 사용되고 있는 재료의 물성에서 드러난 높은 강도로 인한 가공성의 문제, 작업 과정 중 긴 경화 시간으로 인한 처짐 현상, 도구나 장갑에 묻어 유물의 표면을 오염시키는 등의 문제점을 해결하기 위해, 1차적으로 현재 많이 사용되고 있는 Epoxy Putty 형태의 복원 재료 물성을 파악한 후 이를 비교 대상으로 선택하여 경화제와 충전제의 종류에 따른 Epoxy Putty를 개발하였다. 개발 된 Epoxy Putty는 기존 재료의 문제점 해결 및 유사한 물성을 지니기 위해 성상(性狀)이 다른 2종의 경화제를 선정하여 물성 실험을 실시하였다. 경화제로는 Mercaptan 계열의 경화제와 Aliphatic amine 계통의 경화제 2종을 선택하여 개발하였다. 연구 결과 2종 모두 Paste 형태로 경화 시간은 5~10분 내외로 기존 재료에 비해 약 3~10배 정도 짧아 작업의 편리성을 높였으며, 가공성을 높이기 위한 마모율은 약 3배 정도 향상시켜 쉽게 사용할 수 있도록 하였으며, 작업 중 발생하는 표면 오염 등의 단점을 보완하기 위해 충전제로 백색의 Micro-balloon을 첨가하여 사용 중 손에 묻어 나오는 끈적거리는 현상을 줄여주었을 뿐만 아니라 Coloring, 경량성, 절삭력 등이 높은 저수축 및 가공성이 우수한 다목적 복원 재료를 개발하였다.

• Carbon letters
• /
• 제26권
• /
• pp.25-30
• /
• 2018

The dielectric medium used in electrophoretic displays (EPDs) is required to be an environmentally friendly solvent with high density, low viscosity, and a large electric constant. Hydrofluoroether, a highly fluorinated solvent with eco-friendly characteristics, is regarded as a viable alternative medium for EPDs, owing to the similarity of its physical properties to those of the conventional EPD medium. Surface modification of particles is required, however, in order for it to disperse in the charged solvent. Also, positive/negative charges should be present on the particle surface to enable electrophoretic behavior. In this study, carbon black particles wrapped with positively charged nitrogen (N-CBs) were fabricated by a simple hydrothermal process using a poly(diallyldimethylammonium chloride) solution as a black coloring agent for the EPD. The dispersion behavior of N-CBs was investigated in various solvents.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권2호
• /
• pp.86-91
• /
• 1999

In order to analyse the degradation process of epoxy/glass fiber for outdoor condition, FRP laminate was exposed to the wavelength of ultraviolet rays and evaluated by comparing contact angle, surface resistivity, surface potential decay, and ESCA spectrum respectively. As irradiation energy are increased, the surface properties were steeply decreased in the range of 300[nm]. But the measured values within the scope of400[nm]∼440[nm] showed a increase as compared with the untreated ones. Also, fromthe result of ESCA spectrum, it was confirmed plenty of oxygen groups on the spot showing the maximum decrease of surface properties and the existence of ether groups on the surface of coloring phase. We can conclude that the degradation phenomena on the surface of epoxy composites are dominated by the induction of ester and carboxyl groups.

• 한국세라믹학회지
• /
• 제18권2호
• /
• pp.112-118
• /
• 1981

A study was made on the processing of domestic blast furnace slag by flotation and chemical purification for the use of slag as a raw material in making soda lime glasses. Feasibility study has been made for the use of reprocessing slag as a source material for both coloring and chemical components (such as CaO, $Al_2O_3$, MgO and etc.) in the glass making process. Chemical composition of chemically purified slags ranges; $SiO_2$ 34.5~37.5, $Al_2O_3$, 16.2~14.1, $Fe_2O_3$ 0.33~0.14, CaO 34.5~38.8, MgO 4.0~5.2, NmO 0.16~0.39, $TiO_2$ 0.23~0.35, S 0.08~0.42, ignition loss 3.3~8.4 and others 0.48~0.51%. It was found that either amber or greenish color could be easily obtained with the addition of salg up to 24%, however the slag addition to glass batches much impaired the transmitancy of glass products, thus a glass made with 7% slag addition showed 82% in transmitancy value at 510 nm.

• 한국지역사회생활과학회지
• /
• 제15권1호
• /
• pp.27-33
• /
• 2004

Natural dyeing means coloring with dyes extracted from plants, minerals or animals found in nature. Natural dyeing provides calm and natural colors; it has antibacterial and deodorizing qualities; and the dyeing process is environmentally friendly. This study extracted natural dyes from young fruit by thinning out the superfluous fruits of Naju pear trees, and then examined its dyeing properties, the optimal dyeing conditions, and its color fastness for practical use. The results indicated that dyeing is ideal when it had Cu mordant treatment (5% concentration at 9$0^{\circ}C$, pH 4) for 50 min. The color fastness of natural dyes with Cu mordant treatment was very excellent after rubbing and dry cleaning, and also good after exposure to perspiration, light and washing.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1225-1231
• /
• 2013

A novel class of hyperbranched polyesters, HPpEP and HPmEP, were prepared via a facile one-pot polymerization of a phloroglucinol (as a $B_3$ monomer) with a phthaloyl dichloride (as an $A_2$ monomer) for replacing a problematic BPA developer in thermal printing system. The resulting polymers, HPpEP and HPmEP, had highly branched structures and met well the requirements for high performance developer materials such as colorlessness, easy and inexpensive synthesis, high thermal stability, etc. In addition, these polymers exhibited an efficient reaction with leuco dyes (ODB-2) for a coloring process by releasing protons from linear and terminal phenol groups of polymers when heated.

• 한국세라믹학회지
• /
• 제23권4호
• /
• pp.23-26
• /
• 1986

The synthetic conditions of $ ZrSiO_4-Cd(S_xS_{1-x})$ stains from CdS, Se, $SiO_2$ , 4ZrO_2$ and Lif were investigated and the colors were examined. Colors of the stains prepared were yellow orange red pink ruby and violet in relation to both the content of CdS-Se in $ZrSiO_4$ and firing temperature. Colors of these series stains were thermally stabilized probably by the structural stability of zirconium silicate. Furthermore by the result of X-ray diffraction analysis it is assumed that color of the zircon cadmium sulphoselenide $ ZrSiO_4-Cd(S_xS_{1-x})$ stain is developed by neither the coloring ions in $ZrSiO_4$ lattice nor the solid solution of $ZrSiO_4$ and $Cd(S_xS_{1-x})$ but by the small crystals of $Cd(S_xS_{1-x})$ being occluded by the zirconium silicate during sintering process.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.21-26
• /
• 2015

Many 3D printing technologies are being used in various industries, and their demands for well-educated engineers are increasing. Moreover, novel technologies are being developed to overcome the limits of existing 3D printing technologies. In this regard, adequate education and a related curriculum especially in the Mechanical Engineering field, which is the basis of the industry, is essential. In this paper, the development of the 3D printing curriculum and its assessment in Mechanical Engineering education are proposed. The education program consisted of lectures and practice. It consisted of major 3D printing technologies, such as SLA, FDM, SLS, LOM, and Polyjet. Moreover, post-processing, room temperature vulcanizing (RTV), and coloring were also taught. The effectiveness of the proposed education program was assessed by the questionnaire survey, and the results were analyzed. Areas of improvement were deduced from the survey results.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.548-551
• /
• 2007

Among components of digital topographic maps used officially in Korea, only contours have 3D values except buildings and trees that are demanded in landscape planning. This study presented a series of processes for 3Dreconstructing landscape features such as terrain, buildings and standing trees using LiDAR (Light Detection And Ranging) data and aerial digital photo graphs. The 3D reconstructing processes contain 1) building terrain model, 2) delineating outline of landscape features, 3) extracting height values, and 4) shaping and coloring landscape features using aerial photograph and 3-D virtual data base. LiDAR data and aerial photograph was taken in November 2006 for $50km^{2}$ area in Sorak National Park located in eastern part of Korea. The average scanning density of LiDAR pulse was 1.32 points per square meter, and the aerial photograph with RGB bands has $0.35m{\times}0.35m$ spatial resolution. Using reconstructed 3D landscape features, visibility with the growing trees with time and at different viewpoints was analyzed. Visible area from viewpoint could be effectively estimated considering 3D information of landscape features. This process could be applied for landscape planning like building scale with the consideration of surrounding landscape features.

• 한국분말재료학회지
• /
• 제23권2호
• /
• pp.102-107
• /
• 2016

We demonstrate the electrochromic properties of $TiO_2$ nanotubes prepared by an anodization process and investigate the effects of heat treatment and viologen incorporation on them. The morphology and crystal structure of anodized $TiO_2$ nanotubes are investigated by scanning electron microscopy and X-ray diffraction. As-formed $TiO_2$ nanotubes have straight tubular layers with an amorphous structure. As the annealing temperature increases, the anodized $TiO_2$ nanotubes are converted to the anatase and rutile phases with some cracks on the tube surface and irregular morphology. Electrochemical results reveal that amorphous $TiO_2$ nanotubes annealed at $150^{\circ}C$ have the largest oxidation/reduction current, which leads to the best electrochromic performance during the coloring/bleaching process. Viologen-anchored $TiO_2$ nanotubes show superior electrochromic properties compared to pristine $TiO_2$ nanotubes, which indicates that the incorporation of a viologen can be an effective way to enhance the electrochromic properties of $TiO_2$ nanotubes.