• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.3
• /
• pp.361-367
• /
• 2008

This study examined the physicochemical properties of rice embryo in order to investigate the antioxidative effect of black rice bran pigment fraction on rice embryo lipid oxidation. Color stability of rice bran pigment fraction and acid value of added rice embryo were determined at various conditions of pH, temperature, and storage time. Rice embryo contained more crude protein (22.1%) compared to the rice bran (9.4%). However, rice embryo had a higher lipid content than rice bran, causing lipid oxidation during storage. Pigment fraction were relatively stable in acidic pH of 3.0 stored at $4^{\circ}C$ for 9 days. Rice embryo showed increased acid value with increased storage time and temperature. Furthermore, rice embryo with pigment fraction resulted in lower acid value compared to the control group. Therefore, addition of black rice bran pigment fractions to rice embryo improved storage capacity.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.2
• /
• pp.129-136
• /
• 2011

The moisturizing effect and stability of a cream containing 0.25 % Inula britannica flower ethyl acetate fraction were investigated. The pH, viscosity, and absorbance were measured under 4 different temperature conditions(4, 20, 37, and $45^{\circ}C$) and under the sun light at 2 week intervals for 12 weeks. The variations in pH and viscosity of all experimental creams were similar to those of control cream. The absorbance variations of the extract from experimental cream at 330 nm were in the order: under the sun > 45 > 37 > 25 > $4^{\circ}C$. It shows that ethyl acetate fraction in the cream can be oxidized under the sun. In addition, any change in color or smell was not observed through 12 weeks of the experimental period. These results showed that the cream were stable. Accordingly, it is suggested that further study is needed to provide more information to the manufacturers, who are seeking for the application of the extract to improve the anti-oxidant and antibacterial activities and stability of cosmetic products.

• Microbiology and Biotechnology Letters
• /
• v.42 no.2
• /
• pp.145-151
• /
• 2014

The antibacterial effect of Quercus salicina Blume extract was investigated and then the stability of a cream containing it best performing fraction, the ethyl acetate fraction, was evaluated. The antibacterial effect was evaluated on the skin microorganisms Staphylococcus aureus, Bacillus subtilis, Propionibacterium acnes, Escherichia coli, and Pseudomonas aeruginosa. Among the Q. salicina Blume extract fractions, the ethyl acetate fraction demonstrated the lowest minimum inhibitory concentration against S. aureus (1,200 ${\mu}g/ml$), B. subtilis (2,500 ${\mu}g/ml$), P. acnes (1,200 ${\mu}g/ml$) and P. aeruginosa (312 ${\mu}g/ml$). Therefore, a cream containing 0.25% ethyl acetate fraction of Q. salicina Blume extract was prepared and evaluated for stability. The pH, viscosity, and absorbance of the cream were measured under various temperatures (4, 20, 37, $45^{\circ}C$) and sun light during a 12 week period. The changes in viscosity, absorbance and pH of the cream did not change significantly during the term of the experiment when compared with a placebo cream. In addition, any change in color or odor of the cream was not observed during the 12 weeks. These results indicate that the ethyl acetate fraction of Q. salicina Blume extract has a high antibacterial effect and is stable as a cream. There is therefore some potential for its use in cosmetic materials.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.462-466
• /
• 2010

The purpose of this study is to evaluate the safety of a wire connector fabricated for the effective installation of a lighting fixture including its contact resistance, insulation resistance, withstanding voltage characteristics, etc., and to provide the basis for the analysis and judgment of PL(Product Liability) dispute by presenting a damage pattern due to a general flame and overcurrent. This study applied the Korean Standard (KS) for the incombustibility test of the connector using a general flame and performed an overcurrent characteristics test of the connector using PCITS (Primary Current Injection Test System). The contact resistance of the housing connector was measured using a high resistance meter and the insulation resistance was measured using a multimeter. In addition, a supply voltage of AC 1,500V for testing the withstanding voltage characteristics was applied to both ends of the connector. Measurement was performed on 5 specimens and the measured values were used as a basis for judgment. Since the connector is fabricated in the form of a housing, it can be connected and separated easily and has a structure that allows no foreign material to enter. In addition, since it has a structure that allows wires to be connected only when their polarity is identical, any misconnection that may occur during installation can be prevented. When the incombustibility test was performed by applying a general flame to the connector, it showed outstanding incombustibility characteristics and the blade and blade holder connected to the housing remained firmly secured even after the insulation sheath (PVC) was completely destroyed by fire. In addition, the mechanism of the damaged connecting wire showed a comparatively uniform carbonization pattern and it was found that some residual melted insulation material was attached to both ends. In the accelerated life test (ALT) to which approximately 500% of the rated current was applied, the connector damage proceeded in the order of white smoke generation, wire separation, spark occurrence and carbonization. That is, it could be seen that the connector damaged by overcurrent lost its own metallic color with traces of discoloration and carbonization. The contact resistance of the connector at a normal state was 2.164mV/A on average. The contact resistance measured after the high temperature test was 3.258mV/A. In addition, the insulation resistance after the temperature test was completed was greater than $10G\Omega$ and the withstanding voltage test result showed that no insulation breakdown occurred to all specimens showing stable withstanding voltage and insulation resistance characteristics.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.1-7
• /
• 2018

The MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay is commonly used for analyzing the cell viability. In this study, effects of various solvents, different lights, and zinc protoporphyrin (ZnPP) on the chemical behavior of MTT formazan were investigated. The color response of MTT formazan in NaOH was highly pronounced; the absorbance of MTT formazan in 0.1 N NaOH at 550 nm was >2-fold higher than that in water, dimethyl sulfoxide (DMSO), methanol, and ethanol. MTT formazan in DMSO and NaOH (>0.1 N) was relatively stable under fluorescent and UV light at 365 nm; its rapid degradation was induced under UV light at 254 nm in all solvents. ZnPP degraded MTT formazan under light in a time- and concentration-dependent manner; MTT formazan in 0.1 N NaOH was the most sensitive to ZnPP, followed by DMSO. These results suggest that NaOH and DMSO might be suitable media for MTT formazan for monitoring photosensitizing properties.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1007-1012
• /
• 2002

Physicochemical and organoleptic properties were investigated in starch extracted from acorn gamma-irradiated for insect control. Hunter's color L, a, and b values were unchanged upon irradiation at 0.25 to 10 kGy. Scanning electron microscopic observation revealed no changes with gamma irradiation at 1 kGy, that is effective for disinifestation, whereas 10 kGy resulted in some clefts on the starch surface. X-ray diffraction analysis showed patterns of both amorphous and crystalline regions were not different among the treatment groups. Water-binding property, swelling power, solubility, and gelatinization patterns of starch were influenced by irradiation dose, but 1 kGy dose was not detrimental to the physicochemical properties. Textural parameters of acorn gel were relatively stable, but significant reductions were found in hardness, adhesiveness, and chewiness in samples irradiated at 3 kGy or higher. Rrsults revealed that irradiation at 1 kGy or lower could be applied for insect control without causing apparent changes in physicochemical and organoleptic properties of acorn starch.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.2
• /
• pp.115-118
• /
• 2011

A light pink single freesia (Freesia hybrida Hort.) 'Bolero' was developed from a cross of breeding line ('Yellow Ballet' and 'Yellow Dream') and 'Sandra' followed by seedling and line selections at the National Institute of Horticultural and Herbal Science (NIHHS), Rural Development Administration (RDA) in 2007. Growth and flowering characteristic tests were conducted from 2003 to 2006. 'Bolero' has single type flower with light pink color (RHS, R55B). It has multiple florets, stable flower shape, upright leaves and stalks. The average cut flower yield of 'Bolero' observed in the greenhouse from 2005 to 2007 was 7.5 cuttings per plant. It has good production of cormlets and vigorous growth. 'Bolero' could be cultured under greenhouse conditions in Korea.

• Food Science and Preservation
• /
• v.18 no.3
• /
• pp.414-422
• /
• 2011

The optimum condition for phenolics contents extraction from purple sweet potato was 12 hrs. in 50% ethanol. The electron donating scavenging activities (DPPH), ABTS radical cation decolorization (ABTS) and antioxidant protection factor (PF) of Jami, Yeonjami and Shinjami were higher than general sweet potato, and thiobarbituric acid reaction substance (TBARs) was below 30%. The minimum inhibitory concentration (MIC) against Staphylococcus aureus and Escherichia coli on skin were each 5,000 and 2,500 ppm in all purple sweet potatoes, and MIC of Jami was the lowest as 2,500 ppm against Staphlococcus epidermidis. The whitening (tyrosinase inhibitory) activity of purple sweet potatoes was the highest as 62.5% and 48.7% in Jami water and ethanol extracts. The anti-inflammation (hyaluronidase inhibitory) activity of purple sweet potatoes was the highest as 25.3% and 94.4% in Jami water and ethanol extracts. The safety of cosmetic with Jam; extracts was assessed by various safety profiles. pH and viscosity change of essence for 90 days was not detected. Cosmetic was stable to temperature and light for 90 days. The result to measure changes of skin color and pore size of the skin was that an aged skin was more effective than young skin.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.534-538
• /
• 2009

Japanese apricot (Prunus mume) "Okboseok" was released from a cross between "Nanko" and "Yoseibai" in 1993 at the Pear Research Station of National Institute of Horticultural and Herbal Science, Rural Development Administration. It was preliminarily selected in 2001 and named in 2006. It produces high yield with a flesh about average 88.3% of fruit, although the fruit size is small (approximately 14.0g). Horticultural and physiological harvest time of this cultivar is mid and late June respectively. It has single flowers with pink petal color and its flowering time is about 4 days later than that of "Nanko". Its fruit is tolerant to bacterial shot hole (Xanthomonas arboricola pv. Pruni) and pear scab (Venturia nashicola). "Okboseok" has abundant pollen grains (about 96 mg/100 flowers), thus it could be a pollinizer. To obtain stable yields, however, its compatibility with major cultivars is needed to be confirmed as pollinizer cultivar. "Okboseok" is recommended for being preserved in sugar and liquor.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.3
• /
• pp.207-212
• /
• 2018

BACKGROUND: Recently, the need for a method to cultivate 'Haryejosaeng' Satsuma mandarin has been increasing. However, there is limited information available as this is a new Satsuma mandarin cultivar, which was bred by the RDA in 2004. Many farmers who cultivate this cultivar follow the cultivation method similar to that used for 'Miyagawa' Satsuma mandarin, and suffer low production of optimum-sized fruits. METHODS AND RESULTS: This study was conducted to find out the optimum ratio of leaf-to-fruit for the stable production of high quality 'Haryejosaeng' Satsuma mandarin fruits in a non-heated plastic film house. Seven-year-old 'Haryejosaeng' Satsuma mandarin trees were used in the study. Before the treatment, the leaf-to-fruit ratio ranged from 5.7 to 17.9. The treatments included 10, 20, 30, and 40 leaves per fruit. The fruits were removed if over fruiting was observed at day 60 after full bloom. We investigated the fruit size and quality on the day of harvest. Flowering and fruiting patterns in each treatment were recorded for the following year. In the experiments, the flower-to-leaf ratio was 1.12 to 1.74. As the leaf-to-fruit ratio decreased, the fruit size and weight also decreased. Contrarily, the higher the ratio of leaf-to-fruit, the higher fruit size and weight were. It was noted that the ratio of 20:1 was ideal to produce the M grade optimum-sized Satsuma mandarin fruits on the day of harvest. However, higher ratio might result in fruits weighting above 100 g. There was no difference among the treatments in terms of fruit quality, such as total soluble solid contents, titratable acid, and color. In the subsequent years, flowering and fruiting in the treatments were lowered when the leaf number per fruit was 10, but they were improved when the leaf number per fruit was above 20. CONCLUSION: Based on the above results, the optimum ratio of leaf-to-fruit was found to be 20:1 for flowering and fruiting of 'Haryejosaeng' Satsuma mandarin. It is important that optimum ratio of leaf-to-fruit is set as a standard to produce good grade and quality of 'Haryejosaeng' Satsuma mandarin fruits.