• Journal of Korea Multimedia Society
• /
• v.9 no.4
• /
• pp.434-442
• /
• 2006

This paper proposes a color-matching 3D look-up table that simplifies the complex color-matching procedure between a monitor and a mobile display device, where the image colors are processed in a device-independent color space, such as CIEXYZ or CIELAB, and gamut mapping performed to compensate the gamut difference. The transform from a device-dependent RGB color space to a device-independent color space is implemented by performing display characterization. The mobile LCD characterization error using the S-curve model is larger than the tolerance error since the mobile LCD has the channel-chromaticity-inconstancy and channel-dependence characteristics. In this paper we reduced the characterization error using the electro-optical transfer functions of X, Y, and Z value for R, G, B, C, M, Y, K components. Experimental results demonstrated that 64 ($4{\times}4{\times}4$) was the smallest size of color-matching look-up table that could produce an image with an acceptable reproduction error, based on a comparison of color-matched images resulting from the proposed color-matching look-up table and complex step-by-step color-matching procedures.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.130-139
• /
• 2011

In this paper, vehicle tracking algorithm using hue transformation in HIS color model is proposed. the proposed algorithm is installed on the road of the two horizontal virtual data sampling lines. The difference images are detected between the frame and the frame, respectively and also detected in the vehicle by using the hue color distribution to determine identity and lane changes. To examine the effectiveness of proposed algorithm, identification and velocity measurement for driving vehicle are evaluated. this evaluated results is shown by hue data of vehicle passing of two virtual data sample lines, and the velocity measurement for driving vehicle is less than 0.4% comparing with existing vehicle speed meter system.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.67-72
• /
• 2005

Most of image binarization algorithms analyzes the intensity distribution using the histogram for the determination of threshold value. When the intensity difference between the foreground object and the background is great, the histogram shows the tendency to be bimodal and the selection of the histogram valley as the threshold value shows the good result. On the other side. when the intensity difference is not great and the histogram doesn't show the bimodal property, the histogram analysis doesn't support the selection of the proper threshold value. This Paper Proposed the novel binarization method that applies the fuzzy membership function to each color value on the RGB color model and, by using the operation results, separates the features having the great readability from the background. The proposed method prevents the loss of information incurred by the gray scale conversion by using the RGB color model and extracts effectively the readable features by using the fuzzy inference Compared with the traditional binarization methods, the proposed method is able to remove the majority of noise areas and show the improved results on the image of transport containers , etc.

• Journal of KIISE:Software and Applications
• /
• v.27 no.2
• /
• pp.193-200
• /
• 2000

The extraction of face regions is required for Head Gesture Interface which is a natural user interface. Recently, many researchers are interested in using color information to detect face regions in image sequences. Two most widely used color models, HSI color model and YIQ color model, were selected for this study. Actually H-component of HSI and I-component of YIQ are used in this research. Given the difference in the color component, this study was aimed to compare the performance of face region detection between the two models. First, we search the optimum range of facial color for each color component, examining the detection accuracy of facial color regions for variant threshold range about facial color. And then, we compare the accuracy of the face box for both color models by using optimal facial color and motion information. As a result, a range of $0^{\circ}{\sim}14^{\circ}$ in the H-component and a range of $-22^{\circ}{\sim}-2^{\circ}$ in the I-component appeared to be the most optimum range for extracting face regions. When the optimal facial color range is used, I-component is better than H-component by about 10% in accuracy to extract face regions. While optimal facial color and motion information are both used, I-component is also better by about 3% in accuracy to extract face regions.

• Fashion & Textile Research Journal
• /
• v.22 no.6
• /
• pp.789-802
• /
• 2020

This study analyzes the experiences of a color therapy program that uses color and fashion directing to influence the psychological characteristics of adolescents, such as emotional intelligence, self-efficacy, and color expression. The subjects of this study were 15 adolescents who participated in B-City Winter School (January 6-15, 2020). Pre- and post-tests for emotional intelligence and self-efficacy were conducted to confirm the effect of the color therapy program that indicated a significant difference at the p<.05 level. Statistical significance was confirmed through the GEE model for formal characteristics used in pre/post and fashion-directed color expression. Peter pre- and post-changes in vocabulary emergence were investigated with a Word Cloud analysis using R program 4.0.2 that extracted the lower and upper categories. The significance of this study is that by expressing both color expression and fashion direction together, a program was provided for adolescents to have richer emotional experiences and career-related experiences. This study examined changes within a short period of time in 15 subjects; consequently, a follow-up in-depth qualitative analysis of the program effect and a post-testing study on maintaining the long-term effect is expected to secure further validity and usefulness of the study results. In addition, new studies are expected to contribute to the development of differentiated fashion-related education programs.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.77-81
• /
• 2014

This paper propose a method to detect moving object and locating in real time from video sequence. first the proposed method extract moving object by differencing two consecutive frames from the video sequence. If the interval between captured two frames is long, it cause to generate fake moving object as tail of the real moving object. secondly this paper proposed method to overcome this problem by using doppler effects and HSV color model. finally the object segmentation and locating is done by combining the result that obtained from steps above. The proposed method has 99.2% of detection rate in practical and also this method is comparatively speed than other similar methods those proposed in past. Since the complexity of the algorithm is directly affects to the speed of the system, the proposed method can be used as low complexity algorithm for real time moving object detection.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.6
• /
• pp.460-467
• /
• 2015

PURPOSE. The aim of this study is to evaluate the appropriate impression technique by analyzing the superimposition of 3D digital model for evaluating accuracy of conventional impression technique and digital impression. MATERIALS AND METHODS. Twenty-four patients who had no periodontitis or temporomandibular joint disease were selected for analysis. As a reference model, digital impressions with a digital impression system were performed. As a test models, for conventional impression dual-arch and full-arch, impression techniques utilizing addition type polyvinylsiloxane for fabrication of cast were applied. 3D laser scanner is used for scanning the cast. Each 3 pairs for 25 STL datasets were imported into the inspection software. The three-dimensional differences were illustrated in a color-coded map. For three-dimensional quantitative analysis, 4 specified contact locations(buccal and lingual cusps of second premolar and molar) were established. For two-dimensional quantitative analysis, the sectioning from buccal cusp to lingual cusp of second premolar and molar were acquired depending on the tooth axis. RESULTS. In color-coded map, the biggest difference between intraoral scanning and dual-arch impression was seen (P<.05). In three-dimensional analysis, the biggest difference was seen between intraoral scanning and dual-arch impression and the smallest difference was seen between dual-arch and full-arch impression. CONCLUSION. The two- and three-dimensional deviations between intraoral scanner and dual-arch impression was bigger than full-arch and dual-arch impression (P<.05). The second premolar showed significantly bigger three-dimensional deviations than the second molar in the three-dimensional deviations (P>.05).

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.53-62
• /
• 2007

In this paper, it can propose that Fuzzy Wavelet Morphology Neural Networks for the edge detection algorithm with being robustly a unclear boundary parts by brightness difference and being less sensitivity on direction to be detected the edges of images. This is applying the Fuzzy Wavelet Morphology Operator which can be simple the image robustly without the loss of data to DTCNN Structure for improving defect which carrys out a lot of operation complexly. Also, this color image can segment Y image with YCbCr space color model which has a lossless feature information of edge boundary sides effectively. This paper can offer the simulation of color images of 50ea for the performance verification of the proposal algorithm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.2
• /
• pp.197-207
• /
• 2001

Development of new ceramics and esthetic needs of patients increase the use of all ceramic restorations. Fractured teeth often need metal post and core as foundation for final restoration. When all ceramic restorations are planned, metal post and core may lead to compromised esthetics because of opacity and gray color of metal post and core. Many techniques have been proposed to solve this problem such as application of an opaque porcelain to the metal core or all ceramic post and core. This study was performed to evaluate effect on color of Empress 2 crown according to various post systems. Color was evaluated by the CIE $L^*a^*b^*$ systems and measured by spectrophotometer (Model CM-3500, Minolta, Japan). Specimens were divided into 4 groups as follows Group 1 : gold cast post specimen + Empress 2 crown specimen Group 2 : application of an opaque porcelain to gold cast post specimen + Empress 2 crown specimen Group 3 : cosmopost specimen + Empress 2 crown specimen Group 4 : In-ceram post specimen + Empress 2 crown specimen. The results obtained as follows, 1. $L^*$ Values showed that group 2, 3, 4 were higher than group 1 with significant difference and group 2, 3, 4 were not significantly different. 2. $a^*$ Values and $b^*$ values also showed that group 2. 3, 4 were higher than group 1 with significant difference and group 2, 3, 4 were not significantly different. 3. ${\Delta}E^* ab$ Values showed that ${\Delta}E^* ab$ 3 was the highest value and ${\Delta}E^* ab$ 5 was the lowest value.

• Korean Journal of Health Education and Promotion
• /
• v.13 no.2
• /
• pp.167-183
• /
• 1996

Human teeth vary widely in color. Practitioner and patients are concerned with preventing and correcting discolored or dark teeth to achieve and maintain stain-free, white teeth. Tooth brushing cannot alter tooth color but it can remove adhering films and stains. The esthetics of natural dentition can be improved by bleaching and this process can be applied to intrinsically and extrinsically stained teeth. The need for a brighter, more attractive smile has made rapid growth in the market for tooth whiteners. There is no doubt these products work as whiteners, at least on mild to moderate stains, but the safety of these products are unclear. In this experiment, the effect of tooth whitener application on the color and microhardness of extracted human enamel was measured. RMS, RMT and NWT were used as tooth whiteners, and tooth paste(ETQ) and hydrogen peroxide solution(HPO) were used as controls. 35 caries-free extracted human molars were embedded and polished with the exposed enamel diameter of 4 mm. The tooth whiteners and control agents were applied according to the manufacturers' instructions or clinically simulated procedures for eight weeks, and measurements were repeated every two weeks. Value(L＊) difference was measured using Differential Colorimeter(Model TC-6FX, Denshoku Co., Japan), and microhardness was measured using microhardness tester(Mitsuzawa Seiki Co., Japan). The results were as follows; 1. After application of agents for eight weeks, the Vickers hardness increased significantly in the ETQ, RMS and RMT application group(p〈0.01), and that decreased significantly in NWT application group(p〈0.01), but in HPO application group there was no significant change. The change in microhardness was greatest in NWT application group(p〈0.01). 2. After application of tooth whiteners and controls for eight weeks, the value change of toothpaste application group was significantly lower than those of other agents groups(p〈0.01), and there was no significant difference in value(L＊) change among tooth whitener groups(p〉0.01). 3. The application of tooth paste and paste type tooth whitener made gradual value change, but hydrogen peroxide gel type tooth whitener and hydrogen peroxide solution made rapid value change during initial application period.