• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.152.2-152
• /
• 2002

• 한국의류학회지
• /
• 제24권6호
• /
• pp.819-827
• /
• 2000

The purpose of this study is to produce cotton fabric having improved dyeability and colorfastness as well as retaining the desirable durable press property. When cotton fabric was treated with additives, nitrogen content was increased as the additive concentration was increased. DP ratings and wrinkle recovery properties of BTCA treated cotton fabrics were greatly increased. But DP rating was lowered slightly by adding additives and wrinkle recovery property was decreased with the increase of additive concentration. Tensile strength was decreased by BTCA treatment but increased as additive concentration was increased. Various BTCA/additive treatments produced great affinity for reactive and acid dyes when dyebaths were adjusted at pH 3. It was showed that dyeability was increased as additive concentration was increased. The most effective additive for improving the dyeing properties of the crosslinked cotton was TEAㆍHCl. In case of reactive dye, there was almost no improvement on the dyeability of finished cotton by adding salt. Color fastness to washing and light of finished and dyed cotton were low except for the washfastness of reactive dye. Dyeing the BTCA/additive treated cotton fabrics with reactive dye had no effect on the physical properties.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.122-126
• /
• 2010

In this article photoluminescence of the $Al_2O_3:xCr_2O_3$ solid solutions prepared by solid state reaction method are represented. The effect of $Cr_2O_3$-activator concentration and heat treatment time on the PL characteristics have been discussed in conjunction with microstructure of phosphor samples. The $Al_2O_3:xCr_2O_3$ phosphors show the highest PL intensity at x=0.003 mole when the samples are reacted at $1600^{\circ}C$ for 5 h. The PL emission and absorption spectra show the maximum peaks at 698 nm and at 398 nm respectively. The CIE color coordinate is (x=0.646, y=0.316) at 0.003 mole $Cr_2O_3$, which value is very close to the NTSC coordinate of red color. This characteristic feature of $Al_2O_3:xCr_2O_3$ has been applied for an additive to improve the color characteristic of other red phosphor $LiEuW_2O_8$ which has a relatively poor color purity with an emission peak centered at 615 nm and with a CIE coordinate (x=0.530, y=0.280). The $Al_2O_3:0.003Cr_2O_3$ phosphor has been mixed with the $LiEuW_2O_8$ phosphor powder and the PL characteristics and CIE color coordinates are characterized. The $Al_2O_3:xCr_2O_3$ phosphor was found effective for improving the CRI (color rendering index) of $LiEuW_2O_8$ phosphor.

• 한국식품영양학회지
• /
• 제11권5호
• /
• pp.506-512
• /
• 1998

In order to replance systhetic colors by natural colors as food additive, properties of Gardenia yellow color and Gardenia blue color were compared with Food yellow No. 4 and Food blue No. 1. Color differeance between Food yellow No. 4 and Gardenia yellow color was 7.55. Thermal stability of Food yellow No. 4 was above 99%. On the other hand, in case of Gardenia yellow color, showed adove 90% of residual color units in 8$0^{\circ}C$$\times$30min and 10$0^{\circ}C$$\times$30min at pH 7.0 but 75% in 121$^{\circ}C$$\times$15min. Difference of light stability between Food yellow No. 4 and gardenia yellow color was about 18%. Addition of ascorbic acid was increased about 6% in light stability. Color difference between Food blue No. 2 and Gardenia blue color was 107. Thermal stability of Food blue No. 2 was above 99%. But Gardenia blue color showed 92% of residual color units in 8$0^{\circ}C$$\times$30min and 10$0^{\circ}C$$\times$30min at pH 7.0 but 90% in 121$^{\circ}C$$\times$15min. Difference of light stability between Food blue No. 4 and Gardenia blue color was about 8%. Addition of -tocopherol was increased about 4% in light stability of Gardenia blue color.

• 복식문화연구
• /
• 제22권2호
• /
• pp.339-345
• /
• 2014

This study analyzes and compares Hanji made with loess to Hanji made with kaolin, two yellow-based inorganic pigments, in terms of its physical properties, optical properties, and color fastness to light with the aim of using it as a fashion material. Hanji made by adding inorganic pigments showed an approximately 20% retention ratio on average. This figure was similar to those of loess and kaolin. Physical properties were analyzed, with the following results. A higher amount of additives lowered the apparent density and increased thickness and bulk. In general, inorganic pigment-added Hanji had lower tensile strength, bursting strength, and folding endurance compared to non-additive Hanji. The analysis of optical properties showed a lower brightness index for Hanji made with inorganic pigments compared to non-additive Hanji. When comparing the two inorganic pigments, the brightness of Hanji made with kaolin was higher. Regarding color fastness to light, loess showed level 4 and kaolin showed level 5 when 25% inorganic pigments on pulp were added to Hanji. Thus, Hanji made by adding inorganic pigments during the manufacturing process may perform well as materials for fashion because the additives enhanced both the color fastness to light and the bulk while maintaining the strength. In addition, Hanji dyed with inorganic pigments may have the potential to serve as materials for the fashion industry while still retaining the characteristics of Hanji.

• 한국도로학회논문집
• /
• 제13권4호
• /
• pp.117-122
• /
• 2011

아스팔트 콘크리트 포장은 많은 곳에서 쓰여지는 것을 볼 수 있다. 도심지 도로, 고속도로, 주차장, 그리고 자전거 도로에 이용되고 있다. 사용재료의 성질을 보면 비교적 온도에 민감한 재료로 분류될 수 있다. 여름철에는 유연한 성질을 보여주고 있고 겨울철에는 강성의 성질을 보여주고 있다. 포장관리의 측면에서는 손상된 부분에 대해서는 비교적 쉽게 보수할 수 있는 점을 들 수 있다. 그리고 일반적인 아스팔트 포장의 색깔은 검정과 회색으로 구성되어 있음을 알 수 있는데 이들 아스팔트 포장은 다양한 칼라로 표현할 수 있는데 크게 두 가지의 방법으로 칼라포장을 시공할 수 있다. 첫 번째로 시멘트 형태의 칼라도료를 아스팔트 포장에 칠하는 방법으로 도료가 벗겨지는 것을 방지하기 위해서는 주위를 요하는 시공이 요구된다. 두 번째의 방법은 칼라 첨가제를 이용한 칼라 아스팔트 시공을 들 수 있다. 본 방법은 원하는 아스팔트 층에 대해 전체적으로 색을 입히는 방법으로 장점으로는 일반적으로 쓰고 있는 혼합물 배합설계를 이용할 수 있다는 점이다. 단점으로는 주로 빨간색 그리고 갈색으로만 색깔을 표현할 수 있는 것이다. 본 연구에서는 제시된 첨가제를 이용하여 영구변형, 수분민감도 및 피로균열에 대한 공용성을 평가하고자 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.274-277
• /
• 1996

This paper describes the realization of the full-color to the degree of nearest white light by compounding high brightness Red, Green and Blue LEDs with appropriate proportional index. Once these three colors; red, green and blue are mixed, they are genearlly additive mixing and produce white light color contrasted to negative mixing. The luminous efficiency is defined as the product of the efficiency(lm/w), which indicates the degree of perceptual response by the human eye to unit energy(W) of light emitted by an active display devises and as the conversion efficiency of the device from electric power consumed to optical energy produced. We will deduce the each number of LEDs theoretically and design several shapes of LED displays for the full-color. Finally theoretical predictions will be compared with the measured data with different type of display designs.

• 한국임상약학회지
• /
• 제23권2호
• /
• pp.97-105
• /
• 2013

Background: This study was aimed to establish the systematic management methods of tar color additives used in Korea for drugs and quasi-drugs. Although tar color additives have been used in various areas, safety problems are continuously being reported by several studies. For that reason, major countries like US, Japan, Europe are trying to update the safety information of tar color additives and the related management methods, and Korea also need to complement them based on the updated information for their safer use. Method: This report includes the compared information of all legally used tar color additives of each country, such as color additive name, compound name and chemical abstracts service registry number. Conclusion: It is expected that these investigated results will be useful as the basic materials for proper management guidelines of tar color additives in Korea.

• Preventive Nutrition and Food Science
• /
• 제8권2호
• /
• pp.185-190
• /
• 2003

Gamma irradiation was used as part of a new processing method to produce a brighter-colored and mild-flavored green tea leaf extract that retained all of its physiological activities. Dried green tea leaf was extracted with 70% ethanol and gamma irradiated at 0,5, 10, 20 kGy. Hunter color $L^{*}$- and $a^{*}$-values were increased with irradiation in a dose-dependent manner, which was a color range from dark brown to bright yellow. However, the irradiation effect gradually disappeared during 3 weeks of storage, with color reverting to that of untreated samples. There was no difference in the radical scavenging and tyrosinase inhibition effect by irradiation. Among antioxidants used, ascorbic acid was the most effective against color reversion. In contrast, cysteine was shown to protect the effect of color change with irradiation. Results indicated that enhanced color of irradiated green tea leaf extract can be effectively controlled by additives such as ascorbic acid and a low storage temperature.e.e.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1567-1571
• /
• 2006

Synthetic color additives approved for general food use are sixteen in European Union, seven in U. S. A. and twelve in Japan. Twelve food dyes were examined for their inhibitory potency against human protein tyrosine phosphatases (PTPases). Half of the food colorants inhibited PTPases significantly and three of them were potent inhibitors with low micromolar IC50 values. Also examined were the synthetic dyes structurally similar but not allowed in food. Some of them were potent inhibitors of PTPases. Considering the importance of PTPases in cellular signal transduction, inhibition of PTPases by food colorants might cause harmful effects in human health.