• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.316-320
• /
• 2009

UV curable hard and color coatings were formed on polycarbonate(PC) films. The coating materials were composed of a commercially available end-capped polyester(EB830), diacrylate monomer(HDDA), silicon acrylate, photoinitiator, and organic dye as a coloring agent. The surface properties of coating films were evaluated, and the influences of the compositions of coating materials were investigated. The coating films showed high transmission and good adhesion between coating layer and PC substrate. And the coating films exhibited higher hardness than bare PC film. The coating films with various colors were obtained by wet process, and the clear and color window lenses for mobile phone were prepared successfully.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.82-86
• /
• 1996

This study was performed to elucidate the effect of degree of substitution and degree of polymerization of CMC on the rheological characteristics of coating color which is consisted of calcium carbonate as pigment. The results were as follows: 1. It appeared that DP of CMC rather DS has an effect on the low shear viscosity of coating color. 2. According as shear rate increased, the effect of DP and DS on high shear viscosity of coating color decreased. 3. According to increasing DS and DP, the water retention of coating color increased.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.5
• /
• pp.11-16
• /
• 2011

This study was aimed to apply thermochromic and photochromic pigments to coating color and to develop a speciality functional coated layer. Two special pigments were added to a conventional coating color. The effects of the special pigments on coating color properties such as water rerention, low-shear viscosity were evaluated. Also the color changes of coated paper was observed under various circumstances. The results showed that the special pigments didn't influence the coating color properties. The coated paper with the special pigments showed four different colors, under various circumstances, implying that thermochromic and photochromic pigments can be used to produce a security paper.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.140-145
• /
• 1997

A stuey to investigate the perception characteristics of color and brightness was conducted in a combined PC and TV monitor, The objective of this study is to suggest user's favorite color temperature in PC mode and user's favorite contrast in TV mode. Investigated factors were monitor coating(coatiog vs. non-coation)and screen brightness (30fL vs. 35fL)in first experiment and monitor coating and pucture movement(static vs. dynamic) in second experiment. The first experiment was conducted in TV mode. Twenty-three subjects (male 12, female 11) perticipated in this experiment. In first experiment, average color temperatures were about 8000K in all experimental conditions. In addition, there was significant difference between coating and non-coating screen at 0.1 level. In second experiment, average contrasts were obtained in all esperimental conditions. There was significant difference between coating and ndn-coating screen at 0.05 level, In addition, there was significant difference between static picture and dynamic picture at 0.1 level

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.3
• /
• pp.96-101
• /
• 2015

A tongue coating evaluation method for WTCI(Winkel Tongue Coating Index) is proposed in this paper, which is used as the diagnostic criteria in the tongue diagnosis. This method uses the color channel analysis and tongue coating extraction from the ultraviolet tongue image. Proposed method analyzes the histogram distribution of the respective color channel for extracting a tongue coating, and performs the verification test from the selected color channel in the tongue coating extraction. Also, Objectivity of the tongue diagnostic criteria is verified by the artificial sample and real-tongue image experiments. In order to evaluate the performance of the proposed Computerized Assistant WTCI Evaluation method, after verifying a measurement accuracy by using the artificial sample images, and applying to the various real-tongue image of subjects. As a result, the proposed WTCI method is very successful.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.78-78
• /
• 2001

현재 Lab Coating은 실험의 정확성 및 재현성을 위해 기존의 Hand Coating에서 탈피하여 Mayor Coater나 CLC(Cylindrical Laboratory Coated) 등을 사용하여 주로 진행된다. Lab Coater로는 현재 가장 진보된 장비라고 할 수 있는 CLC의 경우 속도와 metering 방식 등에서 현장과 유사한 조건을 재현할 수 있다. 그러나 CLC를 사용하여 Multi Layer C Coating을 실시할 경우 원하는 도공량을 얻기 위해서는 상당한 시간과 노력이 필요하며 특히 Triple Coating의 경 우는 더 힘 든 과정 을 거 쳐 야 한다. 그래서 본 연구에서는 도공량 변화 및 Color Formulation 변경에 의한 물성변화를 측정 하여 Triple Coating에서 두 인자가 각각의 품질에 미치는 영향을 비교 분석하여 어느 정도 도공량 변화가 Color Formulation 변화에 상응하는 영향을 주는지를 파악하고자 하였다.코팅은 CLC 6000을 이용하여 실시하였으며, rod와 blade를 사용한 Triple coating을 5가 지 경우의 Color Formulation에 대하여 실시하였다. 변화시켜 코팅한 후 도공량에 따른 백지물성 관계를 분석한 결과 백색도, 평활도, 거칠음도, 투 기도,2도 trap, Set-Off, Dr${\gamma}$ pick은 총도공량과 강한 상관관계를 보였고, 광택도와 K&N은 총도공량보다는 Top 코팅량과 강한 상관 관계를 보였다. 동일한 코팅칼라를 이용하여 인쇄물성을 고찰하였다. 도공량과 물성의 그러나 동일한 코팅칼라를 사용하여 얻어진 일련의 상관성은 Color Formulation이 변경 되었을 경우 전혀 발견할 수 없었다. 즉 Triple Coating에서 코팅칼라 변경이 품질에 미치는 영향은 도공량 변화에 비해 절대적이어서 몇십%의 현을 억제하지는 못한다는 결론을 도출할 수 있었다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.3
• /
• pp.111-119
• /
• 1991

This study was performed to investigate the effect of gold electrodepositoin on porcelain color of palladium-silver alloy. The specimens were made by firing porcelain on the metal plates cast respectively in Au-Pt alloy, and Pd-Ag alloy. In the case of Pd-Ag alloy specimens, porcelain were fired under three different conditions of the metal plate: 1) without gold coating, 2) firing opaque beforehand on one side, gold coating on the other side, 3) gold coating on both sides of the metal plate. Color change was measured with fiber-optic colorimeter(Model TC-6FX, Tokyo Denshoku Co., Japan). The obtained results were as follows: 1. In the group of firing opaque beforehand on one side and gold coating on the other side, there was no significant differences in their color in comparison to the color of the control group of the Au-Pt alloys. 2. In the group of gold coating on both sides on metal plate, there were no significant differences except their value to the group of firing poaque beforehand on one side and gold coating on the other side.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.1
• /
• pp.10-16
• /
• 2015

Bio-binder is well known as a promising alternative binder for SB latex because it is eco-friendly and inexpensive, compared to synthetic latex. SB latex in top coating color was substituted with starch-based bio-binder to investigate its effects on the coating color and its coated paper properties. Bio-binder contributed to the increase of coating color viscosity, and the improvement of water retention. Most optical properties except opacity were deteriorated by the increase of bio-binder dosage. It was also found that the increase of bio-binder substitution in top coating color brought about the increase of roughness, and decrease of coated paper gloss, print gloss, dry and wet pick strength. However the stiffness and the ink set-off of the bio-binder coated paper were improved. Overall, mostly adverse effects of bio-binder on the properties of coating color and its paper were observed. Therefore, it is not recommended to use bio-binder as top coating color.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.93-101
• /
• 2011

The evaluation of various color coating methods for color maintenance of color asphalt pavement is conducted using the laboratory and field tests on the bus lane. The surface of color asphalt constructed on the bus lane is deteriorated such as changing color and decoloration and abrasion due to the passing of the traffic and time. The total of 9 coating methods were evaluated in this study. The laboratory tests included Ultra violet test, adhesion test and Taber abrasion test and the field tests were british pendulum test and visual survey. The results of tests showed that the different methods showed the their own engineering characteristics and it is dependant upon the main material used. The rubber epoxy material for the main material showed the satisfactory result among the methods tested. However, the performance of the coating methods after 100days are not satisfactory, decoloration, abrasion and peeling up are investigated and need to be studied for the further application in the field.

• Journal of Technologic Dentistry
• /
• v.35 no.3
• /
• pp.185-192
• /
• 2013

Purpose: The aim of this study was to compare with color reproducibility of the coating method and dipping method using a colour liquid. Methods: Two groups of square-shaped specimens ($10mm{\times}10mm$ in diameter, 1.5mm thickness) were prepared for analysis(n=15/group). The CM(Coating Method) group was fabricated as full zirconia specimens with the coating coloring method and Group DM(Dipping Method) was prepared as specimens of 0.7 mm-thick zirconia plate using the dipping coloring method and veneered with 0.8mm-thick porcelain. Color parameters were measured with ShadeEye $NCC^{(R)}$ spectrophotometer and color differences were calculated using the equation ${\Delta}E^*= \{({\Delta}L^*)^2+({\Delta}a^*)^2+({\Delta}b^*)^2\}^{1/2}$. Non-parametric statistical methods, the Mann-Whitney test, and the Kruskal-Wallis test were used to analyze the data. Type one error rate was set at 0.05. Results: Color difference values larger than 7 were observed between specimens with the coating method and the dipping method, which were detectable difference in a clinical setting. Conclusion: Cautious application of the coating coloring method in a clinical setting and further researches to standardize the coating method are needed.