• 보존과학연구
• /
• s.21
• /
• pp.5-55
• /
• 2000

The cultural properties are damaged by various causes according to the characteristics of material, the condition of preservation, and the period of time. Especially, biodeterioration makes lots of damages in organic properties than inorganic ones. The damages of wooden cultural properties by insects usually are caused by the three orders; Isoptera, Coleoptera, and Hymenoptera. As the result of investigation on the state of 141 buildings of wooden cultural properties in 1999, some of them were damaged by many kinds off actors; wasp, powder post beetle, cigarette beetle, termite, decay, and physical cracking. And it was found that the patterns of damages were related to species-specific habits of insects. There are several methods of pest control for the prevention of wooden cultural properties from damages caused by insects. Those are as follows; physical control, chemical control, biological control, and integrated pest management. When insects and fungi were detected at the wooden buildings, the fumigation is best treatment to stop biodeterioration. And then, wood materials also need to be treated with insecticidal and antiseptic chemicals to avoid a reinfestation, because the fumigant is volatile. The six commercial chemicals which are applied to the insecticidal and antiseptic treatment of wooden cultural properties were purchased to test their abilities. According to the comparative results of efficacy of them in laboratory, chemical D showed excellent efficacy in all items, including antiseptic and termiticidal items. The goal of these pest controls is to protect wooden buildings from insects and microorganisms. The most effective method used currently is chemical control(fumigation, insecticidal and anticeptic chemical treatment), but it has to be treated periodically to control pest effectively. Recently environmentally-friendly control methods such as bait system or biological treatments are replacing traditional barrier treatments using large amounts of chemicals. Especially, termite is a social insect which makes a colony. Although a building with fumigation treatment is safe for a while, once attacked building has a risk of damage by reinfestation of termite. Therefore, to control termites from damaged building, the entire colony including reproductives(queen and king) and larvae around buildings must beeliminated. Bait system can be used as a preventive measure in early detection of them through termites colony monitoring and baiting. It would be the most effective for termite control if bait system would be used together with the chemical controls.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.11
• /
• pp.1971-1982
• /
• 2017

Piliated Lactobacillus rhamnosus (pLR) strains possess higher adherent capacity than non-piliated strains. The objective of this study was to isolate and characterize probiotic pLR strains in human fecal samples. To this end, mouse polyclonal antiserum (anti-SpaA) against the recombinant pilus protein (SpaA) of L. rhamnosus strain GG (LGG) was prepared and tested for its reactivity and specificity. With the anti-SpaA, a method combining the de Man, Rogosa, and Sharpe (MRS) agar plating separation and colony immunoblotting (CIB) was developed to isolate pLR from 124 human fecal samples. The genetic and phenotypic characteristics of the resultant pLR isolates were compared by randomly amplified polymorphic DNA (RAPD) fingerprinting, and examination of adhesion to Caco-2 cells, hydrophobicity, autoaggregation, and in vitro gastrointestinal tolerance. Anti-SpaA specifically reacted with three pLR strains of 25 test strains, as assessed by western blotting, immunofluorescence flow cytometry, and immunoelectron microscopy (IEM) assays. The optimized MRS agar separation plus anti-SpaA-based CIB procedure could quantitatively detect $2.5{\times}10^3CFU/ml$ of pLR colonies spiked in $10^6CFU/ml$ of background bacteria. Eight pLR strains were identified in 124 human fecal samples, and were confirmed by 16S RNA gene sequencing and IEM identification. RAPD fingerprinting of the pLR strains revealed seven different patterns, of which only two isolates from infants showed the same RAPD profiles with LGG. Strain PLR06 was obtained with high adhesion and autoaggregation activities, hydrophobicity, and gastrointestinal tolerance. Anti-SpaA-based CIB is a rapid and inexpensive method for the preliminary screening of novel adherent L. rhamnosus strains for commercial purposes.

• 보존과학연구
• /
• s.32
• /
• pp.123-136
• /
• 2011

There are more than 2,800 different species of termites in the world, but just there is one species (Reticulitermes speratus kyushuensis Morimoto) in Korea. Once wooden structures are damaged by termites, we are applying chemical control methods such as fumigation, treatment of insecticidal and antiseptic chemicals, soil termiticide treatment, and termite colony elimination system to pest control. But in Korea, the termite infestation is gradually increasing, so it is essential to study on the present situation of termite control in US or Japan. Accordingly, in this part we have studied focusing on the case of US. In the US, there are three groups of termites : Subterranean, Drywood, Dampwood termites, and they caused more severe infestation compared with Korea. When a structure has become infested with termites, it is important that appropriate action must be taken: the chemical pest control (soil treatment, termite baiting, termite colony elimination), the modification and maintenance of buildings and the regular inspection for follow-up. And with consideration for different characteristics of termites, the process of pest control is made according to each species of termites. Most of the subterranean termite control is done by applying either termiticide to the soil or termite monitoring and baiting system around the structure. On the other hand, drywood termite control methods can be categorized as either the treatment for the whole structure or the treatment for localized area. Applications to the whole structure are done by fumigants or heat and the localized treatments are carried out with chemicals as well as heat, freezing, microwave and electricity.

• Korean journal of applied entomology
• /
• v.61 no.3
• /
• pp.423-434
• /
• 2022

The two previously developed artificial diets (N4 and N6) used for rearing Spodoptera frugiperda (Noctuidae) larvae, were selected as highly-fit ones for rearing Mythimna loreyi larvae. Almost all biological characteristics were not significantly different between the colonies reared on the two diets at 25℃ and 15:9 h (light:dark) photoperiod. The developmental periods were 4.9-5.2 days for eggs, and 22.3-23.2 days for larvae. The pupal period and weight were different between the sexes in each diet colony. The pupal periods in females and males showed 12.6-12.8 days and 14.1-14.5 days, respectively. The pupal weights were ca. 345 mg for females and ca. 380 mg for males. The pupation and emergence rates were ca. 91-94%, and ca. 91-95%, respectively, without significant differences between the two colonies. The pre-oviposition and oviposition periods were 3.4 days and 4.7-4.8 days, respectively. The adult longevity was 8.2 days in females and 10.3-12.4 days in males. Total offsprings produced were found to be 724-847 larvae on an average with ca. 1,400 maximum larvae. In the life table analysis, the intrinsic rates of increases (0.1181 for N4 and 0.1253 for N6) were not significantly different between the two colonies. Individual differences in the larval instar number 5 and 6 were found within a diet colony. The ratios of 5-instar larvae were ca. 22% in N4 colony and ca. 7% in N6 colony. The larval period of 6-instar larvae was longer than that of 5-instar larvae. Width of head capsule in larvae varied from ca. 309 ㎛ for 1st instar to ca. 3,065 ㎛ for 6th instar. Body lengths measured from ca. 2.0 mm for 1st instar to ca. 29.1 mm for 6th instar. Larvae of M. loreyi and M. separata were found at the same time in a maize field during June and July, 2020.

• Journal of Animal Reproduction and Biotechnology
• /
• v.38 no.4
• /
• pp.275-290
• /
• 2023

Background: Porcine pluripotent stem cells (pPSCs) would provide enormous potential for agriculture and biomedicine. However, authentic pPSCs have not established yet because standards for pPSCs-specific markers and culture conditions are not clear. Therefore, the present study reports comparative pluripotency characteristics in porcine induced pluripotent stem cells (piPSCs) derived from different viral transduction and reprogramming factors [Lenti-iPSCs (OSKM), Lenti-iPSCs (OSKMNL) and Sev-iPSCs (OSKM)]. Methods: Porcine fibroblasts were induced into Lenti-iPSCs (OSKM) and Lenti-iPSCs (OSKMNL) by using Lentiviral vector and Sev-iPSCs (OSKM) by using Sendaiviral vector. Expressions of endogenous or exogenous pluripotency-associated genes, surface marker and in vitro differentiation in between Lenti-piPSCs (OSKM), Lenti-iPSCs (OSKMNL) and Sev-piPSCs (OSKM) were compared. Results: Colonial morphology of Lenti-iPSCs (OSKMNL) closely resembles the naïve mouse embryonic stem cells colony for culture, whereas Sev-iPSCs (OSKM) colony is similar to the primed hESCs. Also, the activity of AP shows a distinct different in piPSCs (AP-positive (+) Lenti-iPSCs (OSKMNL) and Sev-iPSCs (OSKM), but AP-negative (-) Lenti-iPSCs (OSKM)). mRNAs expression of several marker genes (OCT-3/4, NANOG and SOX2) for pluripotency was increased in Lenti-iPSCs (OSKMNL) and Sev-iPSCs (OSKM), but Sev-iPSCs (OSKM). Interestingly, SSEA-1 of surface markers was expressed only in Sev-iPSCs (OSKM), whereas SSEA-4, Tra-1-60 and Tra-1-81 were positively expressed in Lenti-iPSCs (OSKMNL). Exogenous reprogramming factors continuously expressed in Lenti-iPSCs (OSKMNL) for passage 20, whereas Sev-iPSCs (OSKM) did not express any exogenous transcription factors. Finally, only Lenti-iPSCs (OSKMNL) express the three germ layers and primordial germ cells markers in aggregated EBs. Conclusions: These results indicate that the viral transduction system of reprograming factors into porcine differentiated cells display different pluripotency characteristics in piPSCs.

• Archives of Pharmacal Research
• /
• v.20 no.5
• /
• pp.448-453
• /
• 1997

Protoplast fusion between isoleucine-, argihine- and thymidine-requiring auxotroph $(Ile^{-}, Arg^{-}, Thy^{-})$ of Lentinula edodes and arginine-requiring auxotroph $(Arg^-)$ of Coriolus versicolor has been achieved using 30% polyethylene glycol (M.W.4000) in 10 mM $CaCl_2$-glycine solution (pH 8.0). Fusion hybrids were selected in the 0.6 M sucrose supplemented minimal media on the basis of nutritional complementation with fusion frequency of $7.4{\times}10{-6}$ The hybrids included both parental and non-parental types in colony morphology, growth rate and isozyme patterns. We succeeded inter-order protoplast fusion between the auxotrophs of Lentinula edodes and Coriolus versicolor overcoming the natural barriers of incompatibility. We examined the characteristics of the hybrids and clarified the fusion rocess using electron microscopy.

• Environmental Analysis Health and Toxicology
• /
• v.18 no.2
• /
• pp.131-136
• /
• 2003

Anti-fungal materials producing bacteria were isolated from soil by bennett's agar and actinomycete isola-tion agar medium. The bacterla were identified as synonym of Actinomycetes. Based on the data obtained from its morphological and colony characteristics. The medium for production of anti-fungal materials was YEME (yeast extract 4 g, malt extract l0g, glucose 4 g, D.W 1ι, pH 7.0${\pm}$0.2). The culture conditions were 30$^{\circ}C$, 7 days and 200 rpm in shaking incubator. No. 13, No. 15 and No.28 strains were produced anti-fungal materials against fungal plant pathogens. Specially, The No. 28 strain showed a powerful biopesticide activity and broad spectrum effects of anti -fungal materials on Collectrichum coccodes, Botrytis cinerea, Cladosporium cucumerinum, Didymella bryoniae.

• Proceedings of the KSAR Conference
• /
• 2004.06a
• /
• pp.276-276
• /
• 2004

Pluripotent stem cells have been generated from two embryonic sources. ES cells are generated from ICM of blastocyst stage embryos, and embryonic germ (EG) cells are generated from primordial germ cells (PGCs). Both ES and EG cells are pluripotent and present important characteristics such as high levels of alkaline phosphatase (AP) activity, multi-cellular colony formation, normal and stable karyotypes, continuously passaging ability, and the capability of differentiation into all three embryonic germ layers. (omitted)

• The Plant Pathology Journal
• /
• v.33 no.2
• /
• pp.109-117
• /
• 2017

Tan spot caused by the fungus Pyrenophora triticir-repentis is a serious disease of wheat, which is on increase in recent years in Mediterranean region. In the field this fungus produces a diamond-shaped necrotic lesions with a yellow halo on wheat foliage. The objective of this study was to characterize and compare several monospore isolates of P. tritici-repentis collected from different infected wheat fields in various locations of Algeria, and find the morphological differences between them, if any. The results revealed wide morphologically variation among the isolates based on colony colors and texture, mycelial radial growth and conidial size.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.4
• /
• pp.287-295
• /
• 2014

Smart manufacturing (SM) considered as a new trend of modern manufacturing helps to meet objectives associated with the productivity, quality, cost and competiveness. It is characterized by decentralized, distributed, networked compositions of autonomous systems. The model of SM is inherited from the organization of the living systems in biology and nature such as ant colony, school of fish, bee's foraging behaviors, and so on. In which, the resources of the manufacturing system are considered as biological organisms, which are autonomous entities so that the manufacturing system has the advanced characteristics inspired from biology such as self-adaptation, self-diagnosis, and self-healing. To prove this concept, a cloud machining system is considered as research object in which internet of things and cloud computing are used to integrate, organize and allocate the machining resources. Artificial life tools are used for cooperation among autonomous elements in the cloud machining system.