• Journal of the Korean Institute of Navigation
• /
• v.12 no.1
• /
• pp.71-84
• /
• 1988

For traffic proceeding in random directions on a plane surface the frequency of collision, if no avoiding action in taken ,is approximately proportional to the square of the traffic density and directly proportional to the size and speed of the ship, Avoiding is normally taken and the rte of collisions is therefore also governed by additional factors such as the visibility, the effectiveness of the collisionavoidance rules, the competence of personnel or watchkeeping attitude, the maneuverability of the ship and the efficiency of radar and other equipments. From the viewpoint of watchkeeper who is responsible for maneuvering, watchkeeping attitude such as lookout and action to avoid collision is the most controllable factor among those mentioned above. In practice, according to the investigation of the institution of marine courts, about 50% co collisions occurred is caused by disorbedience to steering and sailing rules of international regulations for preventing collision at sea including lookout. So we classify the process of collisions with first sight of another ship , assessment of risk of collisions and action to avoid collisions and make a factural survey about lookout and action to avoid collisions from the point on "time" and " distance", namely relationship among ship's size, speed, first sight time of another ship, action to avoid collisions ,and distance from sight of another ship to collision occurred. According to the results of the actual survey , we come to conclude that most of collisions occurred are due to improper lookout and ineffective action to avoid collision which means time lag from first sight of another ship to time of action taken to avoid collision is relatively long. is relatively long.

• Journal of The Korean Astronomical Society
• /
• v.33 no.3
• /
• pp.173-175
• /
• 2000

The time-dependence of an $\alpha$-disk model under the influence of collisions of particles is examined. Collisions with viscosity tend to take away angular momentum. Both effects cause the disk to rotate more rapidly. The disk gradually contracts with increasing time.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.1
• /
• pp.15-21
• /
• 2022

Collision analysis involving a vehicle frame that includes a battery and a battery case was performed using a carbon fiber composite material (CFRP) and a glass fiber-reinforced plastic (GFRP), which are lightweight materials. Three types of collisions were analyzed: frontal collisions, partial frontal collisions, and side collisions. The maximum stress and deformation levels were measured for each case. To evaluate the stability of ignition and explosion potential of the battery, the maximum stress of the frame was measured before measuring the direct stress to confirm whether the collision energy was sufficiently absorbed. The deformation level of the battery case was measured to confirm whether the battery case affects the battery directly.

• Journal of the Ergonomics Society of Korea
• /
• v.13 no.1
• /
• pp.15-25
• /
• 1994

Based on Fatal Accident Reporting System (FARS) data, safety belt effect- tiveness in preventing fatalities is investigated for the following five types of crashes: frontal, left, rear, right, and rollover. Passenger cars containing two occupants, a driver and a right front passenger, are included in this analysis. For each crash type, these cars containing the two occupants are classified into four categories according to the safety belt usage categories for the two front seat occupants, namely, both belted, both unbelted, and either one was belted but not both. Relative risks of driver and right front passenger fatalities are compared among these four cases. For each crash type, two independent estimates of safety belt effectiveness are obtained for drivers and for right front passengers. The weighted average of the two estimates is calculated for drivers and for right front passengers for the five crash types. Using FARS data starting 1978 throught 1983, safety belts are more effective in rollover accidents than in frontal collisions. In rollover accidents, safety belt effectiveness estimate for drivers is $68%{\pm} 6% $ and that for right front passengers is $71%{\pm}6% $ , in which the error limits indicate one standard error. Sfety belt effectiveness estimates for drivers and right front passengers involved in frontal collisions are $41%{\pm} 9% $ and $37%{\pm} 10% $ , respectively. For left and right sided collisions and for both drivers and right-front-passengers, none of the four estimates are significantly different from 0%, statistically : however, when left and right sided collisions are combined with far sided occupants(drivers involved in right sided collisions and right front passengers involved in left sided collisions) safety belt effectiveness is significant, $38%{\pm} 12% $ . For rear collisions, the estimate for drivers shows statistically significant positive effect, $60%{\pm}23% $ . while for right-front-passengers the estimate is not significantly different from 0%. These results show that a safety belt is an effective restraint system not only in frontal crashes but also in a variety of crashes.

• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.1
• /
• pp.13-20
• /
• 2013

Bird collisions with glass are a substantial source of human-caused avian mortality. It has been estimated that between 100 million and 1 billion birds die in collisions with windows every year, and bird-window collisions can have a particularly serious impact on populations because glass is dangerous for strong, healthy, breeding adults. The purpose of this study are to address the bird-window collision issue and to provide suggestions for bird-safe development by reviewing precedent studies on bird collision and analyzing bird-friendly design guidelines. Typically reflections of the sky, clouds or trees on glass, green plants in lobbies, and lights attract and confuse both migrating and resident birds. Therefore birds fatally fly into the glass because they do not recognize that reflections are false and that glass is a barrier. Many cities such as Toronto, Chicago and New York have made efforts on reducing the bird collision by encouraging the creation of environmentally conscious and bird-safe buildings. The USGBC also introduced a bird-safety credit as part of its environmental certification process, called LEED. The results of the study presented that architects and builders can help reduce or prevent bird from collisions in both new construction and existing structures with creative use of design elements. The measures to reduce bird collisions include using glass with an embedded pattern, opaque or translucent films, decals, dot patterns, awnings, louvers, and grilles. Turning off lights after midnight during the spring and fall migrations can be part of the solution as well. In order to reduce bird mortality, the most important thing is to generate awareness of the issue among designers, builders, as well as the public. Also local governments need to develop bird-friendly design guidelines and planning mechanisms to encourage bird-safe development and building operation.

• International Journal of Highway Engineering
• /
• v.17 no.1
• /
• pp.119-127
• /
• 2015

PURPOSES : Before-and-after studies of red light cameras were conducted with the aim of reducing the number of side right-angle collisions. Three different methods were used for the before-and-after studies, and the analysis results were compared. METHODS : This research used the naive before-and-after method, the comparison-group method, and the empirical Bayes method to study the effects of red light cameras on side-angle collisions. The results of the three before-and-after methods were compared and interpreted in terms of safety indications at signalized intersections. RESULTS : The research results showed that side right-angle collisions can be reduced by installing red light cameras at signalized intersections. All three methods guarantee safety improvements of 25~30% on average. With regard to the results of each method, the naive before-and-after method, the comparison-group method, and the empirical Bayes method showed safety improvements of 25.6%, 27.8%, and 29.7%, respectively. CONCLUSIONS : It was concluded that red light cameras are an effective countermeasure to improve intersection safety. In particular, by installing red light cameras, side right-angle collisions can be reduced by up to approximately 25~30%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.12
• /
• pp.3152-3165
• /
• 2012

Wireless sensor networks (WSN) often employ asynchronous MAC scheduling, which allows each sensor node to wake up independently without synchronizing with its neighbor nodes. However, this asynchronous scheduling may not deal with collisions due to hidden terminals effectively. Although most of the existing asynchronous protocols exploit a random back-off technique to resolve collisions, the random back-off cannot secure a receiver from potentially repetitive collisions and may lead to a substantial increase in the packet latency. In this paper, we propose a new collision resolution algorithm called Transient Coordinator (TC) for asynchronous WSN MAC protocols. TC resolves a collision on demand by ordering senders' transmissions when a receiver detects a collision. To coordinate the transmission sequence both the receiver and the collided senders perform handshaking to collect the information and to derive a collision-free transmission sequence, which enables each sender to exclusively access the channel. According to the simulation results, our scheme can improve the average per-node throughput by up to 19.4% while it also reduces unnecessary energy consumption due to repetitive collisions by as much as 91.1% compared to the conventional asynchronous MAC protocols. This demonstrates that TC is more efficient in terms of performance, resource utilization, and energy compared to the random back-off scheme in dealing with collisions for asynchronous WSN MAC scheduling.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.416-419
• /
• 2004

The kinetic energy during ship collision with bridge piers is released as the permanent deformations of structure and friction between the impact surfaces. So the ship collision energy is estimated from the equations of motions for ship-pier collisions which include the influence of the surrounding water, different impact angles and impact locations. The normal impact energy and tangent impact energy at a collision location and angle can be transformed into the normal impact force and friction force acting on the structure. Also the kinetic energy after collisions is calculated from the linear and angular impulse of ship collisions. The collision energy absorption system such as the protective structures for bridges is designed by evaluating the damage portions of ship and structure during the ship-structure collisions varying from the soft impact to hard impact and then the estimation of it will be suited for the design of protective measures.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.1-11
• /
• 1994

The most commonplace of collisions that directly affect people is that of vehicles. Safety studies have noted a correlation between vehicle occupant injury severity and velocity changes. Methods for estimating collision velocity changes are discussed here. This topic is part of what is referred to as accident reconstruction. Only planar collisions are considered. When a vehicle collides with another, impact dynamics with friction should be considered. This paper presents a general analysis methodology of impact. must dynamics incorporating friction. The presence of friction between sliding contacts during the impact makes the problem difficult since the events such as reverse sliding or sticking, which may occur at different times throughout the impact, must be determined. This paper uses the results of RICSAC experiments for verifying the developed methodology. The analysis and experimental results agree well.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.228-232
• /
• 2008

In recent years, wireless ad hoc networks have become increasingly popular in both military and civilian applications due to their capability of building networks without the need for a pre-existing infrastructure. Recently, IEEE 802.11 Task Group e has been working on a new mechanism, the Enhanced Distributed Coordination Function (EDCF), to enhance the performance of 802.11 DCF. However, EDCF only reduces the internal collisions within a station, and external collisions between stations remain high in ad-hoc networks. In this paper, we propose to adopt an adaptive backoff window control technique, based on a dynamic value of the initial value of the range in which the backoff is chosen, so the backoff timer is randomly chosen in the range (InitRng, CW-1). We use ns-2 simulation to evaluate the throughput of our scheme. Results show that the throughput is improved for our scheme compared to the original DCF due to the reduced the number of collisions.