• Journal of the Korea Society of Computer and Information
• /
• v.17 no.5
• /
• pp.71-80
• /
• 2012

In this paper, applications that require low-speed data rate on personal area network to operate the Land Warrior system is proposed. These applications can refer to WSN(wireless sensor network) technology. However, this technology is not suitable to support various data transmission rate. A suitable CSMA/CA algorithm for Land Warrior System in order to solve these existing system problems is proposed. The proposed algorithm is designed to be variable CSMA/CA algorithm parameter, depending on data rate. For the evaluation of Land Warrior system model and CSMA/CA algorithm, we used Castalia. As a result of the simulation, it is found that the proposed system model can not only relieve loads of data processing, but also probability of collision was decreased.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1610-1615
• /
• 2007

This paper presents a characteristics of linear induction motor considering airgap variation for railway transit in order to achieve high performance of the vehicle. The operating principle of a LIM(Linear induction motor) is identical to a rotary induction motor. Space-time variant magnetic fields are generated by the primary part across the airgap and induce the electro-motive force(EMF) in the secondary part, a conducting sheet. This EMF generates the eddy currents, which interact with the airgap flux and so produce the thrust force known as Loren's force. Even though the operating principal is exactly same as a rotary motor, the linear motor has a finite length of the primary or secondary parts and it causes static and dynamic end-effect which is the discontinuous airgap flux phenomenon. This end-effect causes the deterioration of the system performance, especially in high-speed operation. Another problem is that construction tolerance restricts the minimum airgap in order to prevent a collision between the primary part and the secondary reaction plate. More over, as the airgap length is getting smaller, the attraction force between the primary part and secondary parts is getting larger dramatically and the attraction force would be another friction against propulsion. Therefore, it is necessary to figure out the characteristics of linear induction motor considering airgap variation in order to achieve high performance of the vehicle. The dynamic model of LIM taking into account end-effects is derived. Then the modified mechanical load equation considering the effect of the attraction and thrust force according to the airgap variation is analyzed. The simulation results are presented to show the effect of the LIM according to the airgap variation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.132-138
• /
• 2012

VANET(Vehicular Ad-hoc Network), standardization of IEEE 802.11p specification is in process. 802.11 MAC protocol grants all nodes equal opportunity to acquire channel without regard to their bit-rates, making it possible for lower bit-rate nodes to occupy communication channel for a fair amount of time thus keeping the higher bit-rate nodes from acquiring connection channel which downward-equalize the overall network performance. Also with the 802.11p MAC protocol, the probability of collision occurring increases as the number of nodes grow. The proposed algorithm is a new MAC protocol that guarantees nodes with acquired channel a firm priority over other nodes for a fixed amount of time with TXOP concept added to 'packet burst' according to the current transmitting speed. This newly designed algorithm allows the construction of wireless network with enhanced network throughput, decreased probability of collisions as well as providing the means to grant each node a fair chance of acquiring connection according to their channel conditions. The algorithm sets the CW's (Contention Window) width wider than the standard's and modulates the continuous transmitting threshold value depending on channel acquired time, thus improving the overall performance of the network.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.192-199
• /
• 2004

Navigation simulators have been used in many marine schools and manne training centers since the early 1960's. But these simulators were very expens~ve and were almost limited only in one engine system. In this paper, a catamaran with twin engine system. controlled by two remote control levers and its economic simulator based on a personal computer shall be introduced. One of the main features of catamaran is to control variously its progressing direction. In the static state, a catamaran can move into all the directions and in the dynamic state, ship can change immediately the heading and speed. Although a good navigator can skillfully operate one engine system, it is difficult to control smoothly the catamaran of twin engine system without any threat for the safety of passengers. Thus. in order to bring up the expert navigators. the development of a simulator which makes the training effective is necessary, Therefore, in this paper, a Fuzzy Inference Technique based Maneuvering Simulator for catamaran with twin engine system was developed. In general. in order to develop a catamaran simulator for effective training, first of all. its mathematical model must be acquired. According to the acquired system modeling. the dynamics of simulator is determined, But the proposed technique can omit a complex and tedious mathematical modeling procedures by using the fuzzy inference, which dependent upon only experiences of an expert and can design an efficient training program for unskillful navigators. This developed simulator was consisted of two fuzzy inference routines and two remote control levers, and was focused on effective training of navigators for the safe maneuvering to avoid a collision in a harbor.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.549-559
• /
• 2015

In this paper, an efficient dynamic reactive motion planning method for an autonomous vehicle in a dynamic environment is proposed. The purpose of the proposed method is to improve the robustness of autonomous robot motion planning capabilities within dynamic, uncertain environments by integrating a virtual plane-based reactive motion planning technique with a sensor fusion-based obstacle detection approach. The dynamic reactive motion planning method assumes a local observer in the virtual plane, which allows the effective transformation of complex dynamic planning problems into simple stationary ones proving the speed and orientation information between the robot and obstacles. In addition, the sensor fusion-based obstacle detection technique allows the pose estimation of moving obstacles using a Kinect sensor and sonar sensors, thus improving the accuracy and robustness of the reactive motion planning approach. The performance of the proposed method was demonstrated through not only simulation studies but also field experiments using multiple moving obstacles in hostile dynamic environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.378-389
• /
• 2006

An IP address lookup scheme has become a critical issue increasingly for high-speed networking techniques due to the advent of IPv6 based on 128bit. In this paper, a novel global IPv6 unicast address lookup scheme is proposed for next generation internet routers. The proposed scheme perform a variable multiple hashing based on prefix grouping. Accordingly, it should not only minimize overflows with the proper number of memory modules, but also reduce a memory size required to organize forwarding tables. It has the fast building and searching mechanisms for forwarding tables during only a single memory access. Besides, it is easy to update forwarding tables incrementally. In the simulation using CERNET routing data as a 6bone test phase, we compared the proposed scheme with a similar scheme using a uniform multiple hashing. As a result, we verified that the number of overflows is reduced by 50% and the size of memory for forwarding tables is shrunken by 15% with 8 tables.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.285-286
• /
• 1998

Virtual Brain-endoscopy is an effective method to detect lesion in brain. Brain is the most part of the human and is not easy part to operate so that reconstructing in 3D may be very helpful to doctors. In this paper, it is suggested that to increase the reliability, method of matching 3D object with the 2D CT slice. 3D Brain-endoscopy is reconstructed with 35 slices of 2D CT images. There is a plate in 3D brain-endoscopy so as to drag upward or downward to match the relevant 2D CT image. Relevant CT image guides the user to recognize the exact part he or she is investigating. VRML Script is used to make the change in images and PlaneSensor node is used to transmit the y coordinate value with the CT image. The result is test on the PC which has the following spec. 400MHz Clock-speed, 512MB ram, and FireGL 3000 3D accelerator is set up. The VRML file size is 3.83MB. There was no delay in controlling the 3D world and no collision in changing the CT images. This brain-endoscopy can be also put to practical use on medical education through internet.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.6
• /
• pp.558-571
• /
• 1992

In this paper, we propose an improved method of state exploration called the extended circular exploration (ECE) for the efficiency of state exploration and the reduction of explosively growing state. The ECE does not need to explore all the reachable global states, and It can be applied to JV($\boxDr$$\geq$ 2) -party protocol with alternative routes, i.e., it is applicable to the protocol In which adaptiverouting mechanism can be performed. The ECE eliminates a restriction of topology of the conventional circular exploration(CE) by exploring only those global states which are reachable, provided that the participant processes of any group of transitions proceed at the same speed, and that they can be formed as a cycle. Thus the state space explored if not exhaustive. The algorithm presented can detect deadlock error and unspecified reception error It requires storage space and /or execution time much less than those of the conventional perturbation(CP) . It might be used for a solution of the N-process collision and the interference mechanism.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.37 no.1
• /
• pp.29-36
• /
• 2017

Recently, KTX (Korean Train Express) train stoppage accidents were mainly caused by malfunctioning equipment, aging and cracking of railway vehicles, crack breakages of brake disks, and breakages of brake disks. Breakage of brake disk can cause large-scale casualties such as high-speed collision and concern about derailment by hitting lower axle and wheel. Therefore, in this study, a brake disk with solid and ventilation type, which is the brake disk of a KTX train was modeled, and a dynamometer system was constructed to operate the disk. A Rayleigh wave was used to inspect the surface of the brake disk. An ultrasonic inspection module was developed for the brake disk by using a local immersion method due to the difficulty involved in ultrasonic inspection using an existing immersion method. In addition, the surface defects of the brake disk were evaluated using a dynamometer mock-up system and an ultrasonic inspection module of the brake disk.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.4
• /
• pp.289-295
• /
• 2005

This study is intended to provide navigator with specific information necessary to assist in the avoidance of collision and in operation of ships to evaluate the manoeuvrability of own ship. The actual manoeuvering characteristics of ship can be adequately judged from the results of typical ship trials manoeuvres. Author carried out sea trials based full scale for turning test, zig-zag test, spiral tests and crash-stop test at actual sea going condition. The turning circle manoeuvres were performed on starboard and port sides with $35^{\circ}$ rudder angle at the service speed, and Zig-zag procedures were performed on both sides with $10^{\circ}$ and $20^{\circ}$ rudder angle respectively. Spiral tests were carried out on the both sides and crash stop test was also carried out. The results from tests could be compared directly with the standards of manoeuverability of IMO and consequently the manoeuvring qualities of the ship is fully satisfied with its.