• Tunnel and Underground Space
• /
• v.30 no.1
• /
• pp.76-86
• /
• 2020

In this study, a small autonomous driving robot was developed for underground mines using the Light Detection and Ranging (LiDAR) sensor. The developed robot measures the distances to the left and right wall surfaces using the LiDAR sensor, and automatically controls its steering to drive along the centerline of mine tunnel. A field experiment was conducted in an underground amethyst mine to test the driving performance of developed robot. During five repeated driving tests, the robot showed stable driving performance overall. There were no collision accidents with the wall of mine tunnel.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.3
• /
• pp.329-334
• /
• 2011

This paper presents the method for location estimation with obstacle tracking method. A laser scanner is used to implement the system, and we assume that the map information is known. We matches the measurement of the laser scanner to estimate the location of the robot by using sequential monte carlo (SMC) method. After estimating the robot's location, the pose of obstacles are detected and tracked, hence, we can predict the collision risk of them. Finally, we present the experiment results to verify the proposed method.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.379-388
• /
• 2018

In this study, we propose a new approach to impliment autonomous travelling of mobile robot based on obstacle avoidance and voice command. Obstacle Avoidance technology of mobile robpot. It has been used in wide range of different robotics areas to minimize the risk of collisions. Obstacle avoidance of mobile robots are mostly applied in transportation systems such as aircraft traffic control, autonomous cars etc. Collision avoidance is a important requirement in mobile robot systems where they all featured some kind of obstacle detection techniques in order to avoid colliding. In this paper it was illustrated the reliability of voice command and obstacle avoidance for autonomous travelling of mobile robot with two wheels as the purpose of application to the manufacturing process by simulation and experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.333-334
• /
• 2016

Recently, with the development of technology for the virtual reality services, the virtual reality technology has been to use various application services. However, because it is difficult to secure a non-Augmented Reality Virtual Reality in this case it has a vision problem that can be fixed in a service only, not removable. In this paper, we propose a technique of application iBeacon signal by applying the technology of the indoor location-based service using a virtual reality system described in iBeacon ensure the mobility in a virtual space, and can detect the collisions with other moving objects.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.2
• /
• pp.34-43
• /
• 2022

In Efforts to prevent CFIT accidents so far, have been emphasizing various education measures to minimize the occurrence of human errors, as well as enforcement measures. However, current engineering measures remain in a system (TAWS) that gives warnings before colliding with ground or obstacles, and even actual automatic avoidance maneuvers are not implemented, which has limitations that cannot prevent accidents caused by human error. Currently, various attempts are being made to apply machine learning-based artificial intelligence agent technologies to the aviation safety field. In this paper, we propose a deep reinforcement learning-based artificial intelligence agent that can recognize CFIT situations and control aircraft to avoid them in the simulation environment. It also describes the composition of the learning environment, process, and results, and finally the experimental results using the learned agent. In the future, if the results of this study are expanded to learn the horizontal and vertical terrain radar detection information and camera image information of radar in addition to the terrain database, it is expected that it will become an agent capable of performing more robust CFIT autonomous avoidance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.6
• /
• pp.43-49
• /
• 2022

FMCW(Frequency Modulated Continuous Wave) Radar is very useful for vehicle collision warning system and autonomous driving sensor. In this paper, the design and implementation of FMCW radar based on two chip MMIC developed as an autonomous driving sensor was described. Especially, generation of frame-based and chirp-based waveform generation and signal processing are mixed to have the strength of maximum detection speed and compensation of speed. This implemented system was analyzed for performance and commercialization potential through lab. test and driving test in K-city.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.815-817
• /
• 2022

This paper is about the development of an automatic stair climbing trolley for carrying loads without manpower. The design of tri-wheeled structure and center of mass enable the trolley to move on flat ground and also to ascend stairs by self-balancing. The overall design enables the trolley to avoid collision to walls when the trolley rotates on domestic landings. When the camera recognizes the stair, the sensor measures distance from the trolley to the stair. Then the trolley can move to align itself in the middle of the stair and it starts climbing. It can ascend to a specific floor based on the floor number entered by the user. As a result, the automatic stair climbing trolley is expected to help humans by protecting from accidents of dropping loads and saving their power. It is also expected to use for various purposes such as delivering packages, moving and carrying heavy loads in buildings without elevator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.574-580
• /
• 2016

In this paper, we will introduce the system that can control multiple vehicles on the road through Single Board Computers and V2I (Vehicle-To-Infrastructure). Also, we will propose the group evasive maneuver decision algorithm, which plays a critical role in deciding whether the vehicles in the system have to conduct evasive maneuvers to avoid obstacles on the road. In order to test this system, we have utilized Wi-Fi and TCP/IP for establishing the communication between multiple vehicles and the relay server, and observed their driving states on the road with obstacles. During the experiments, we have discovered that our original decision algorithm possesses high failure rate when there is frequency interference in ISM (Industrial Scientific Medical) band. In order to reduce this failure rate, we have implemented the data transition detector. This paper will focus on how the use of data transition detector can affect the reliability of the system under the frequency interference of ISM band. If this technology is improved and applied in the field, we will effectively deal with such dangerous situations as multiple collision accidents through vehicle-to-vehicle communication or vehicle-to-infrastructure communication. Furthermore, this can be applied to the autonomous driving technologies. This can be used as the reference data for the development of the similar system.

• Journal of the Korea Computer Graphics Society
• /
• v.26 no.3
• /
• pp.9-19
• /
• 2020

With the recent development of various kinds of virtual reality devices, there has been an active research effort to increase the sense of reality by recognizing the physical behavior of users rather than by classical user input methods. Among such devices, the Leap Motion controller recognizes the user's hand gestures and can realistically trace the user's hand in a virtual reality environment. However, manipulating an object in virtual reality using a recognized user's hand often causes the hand to pass through the object, which should not occur in the real world. This study presents a way to build a visual feedback system for enhancing the user's sense of interaction between hands and objects in virtual reality. In virtual reality, the user's hands are examined precisely by using a ray tracing method to see if the virtual object collides with the user's hand, and when any collision occurs, visual feedback is given through the process of reconstructing the user's hand by moving the position of the end of the user's fingers that enter the object through sign distance field and reverse mechanics. This enables realistic interaction in virtual reality in real time.

• Journal of the Korea Society for Simulation
• /
• v.22 no.4
• /
• pp.83-92
• /
• 2013

The demand of a camera-lens-module which is installed in mobile phone has been increased explosively as the increase of mobile phone market. Recently, two missions are given to the parts manufacturer of lens module, and they are how to keep the quality of injection moulding process as the increase of resolution, and how to decrease manufacturing cost. In this paper, a simulation study is introduced which is used for developing barrel and shield considering the double-cassette type of mould. At first, the simulation for injection process using Mold Flow$^{TM}$ is applied in the phase of mould design, and mechanical simulation using DPM Assembly$^{TM}$ is applied for collision detection between picking robot and mould. As a result, the productivity increased more than 300%.